Must the person whose face is captured in a traffic violation handle it personally?

1 Answers
LeSophie
07/24/25 5:00am
If a traffic violation captures the face, the violator must handle it personally. The offending driver must present their driver's license to process the violation, especially for speeding, as high-definition surveillance photos are taken, and the driver's face must be verified on-site. Therefore, the violator must use their own driver's license to handle the violation. If there are no objections to the violation, after completing the deduction of points from the driver's license, a violation processing notice and a fine ticket will be issued. Below are common traffic violations: 1. Running a red light: This is the most common violation. Since the new traffic regulations were introduced, running a red light results in a 6-point deduction at once. 2. Driving without a license: If a driver continues to drive while their license is suspended, they will be fined and detained for 15 days. For those driving without a license or with a revoked license, they will be detained for 15 days and fined. 3. Overloading or overcrowding: For passenger vehicles exceeding the rated capacity by less than 20% or freight vehicles exceeding the rated load by less than 30%, a fine will be imposed. For passenger vehicles exceeding the rated capacity by 20% or freight vehicles exceeding the rated load by 30%, a fine will be imposed. 4. Drunk driving: For driving under the influence of alcohol, the driver's license will be suspended for 3 months, and a fine will be imposed. For driving a commercial vehicle under the influence of alcohol, the driver's license will be suspended for 3 months, and a fine will be imposed. 5. Speeding: For driving 50% over the speed limit, a fine will be imposed, and the driver's license will be revoked.
Was this review help?
19
3
Share
More Forum Discussions

Should You Use Hot or Cold Air to Defog in Summer?

Both cold and hot air are equally effective for defogging, but using cold air is more comfortable in summer while hot air is preferable in winter. Here's an introduction to automotive air conditioning systems: 1. Introduction: The automotive air conditioning system is a device that cools, heats, ventilates, and purifies the air inside the vehicle compartment. It provides a comfortable environment for passengers, reduces driver fatigue, and enhances driving safety. 2. Classification by Drive Method: Divided into independent type (uses a dedicated engine to drive the compressor, offering large cooling capacity and stable operation, but with higher costs, larger size and weight, mostly used in large and medium-sized buses) and non-independent type (the air conditioning compressor is driven by the vehicle engine, with cooling performance significantly affected by engine operation, less stable, mostly used in small buses and cars).
3
1
Share

How to Shift to Second Gear?

To shift to second gear, simply pull back from first gear. Here are detailed instructions on shifting to second gear: 1. Precautions: Do not depress the clutch for extended periods while turning. If the speed is too high during a turn, it can easily lead to a rollover. Therefore, some beginners tend to depress the clutch and use intermittent braking to reduce speed. However, this method can cause significant damage to the clutch, leading to issues with the internal release bearing due to excessive heat. 2. Function: Shifting gears is essentially about changing speed, which involves altering the gears connected to the engine to improve its efficiency. Since the speed of the car is directly related to the gears on the driveshaft, generally, cars with more gears will have multiple rows of gears on a single driveshaft.
3
5
Share

What type of frame is currently used in most sedans?

Currently, most sedans adopt a unibody construction. The unibody does not have a separate frame; instead, the body itself serves as the mounting base for the engine and various chassis components, functioning as the frame while bearing all loads. Additional Information: Advantages and Disadvantages of Unibody Construction: 1. Advantages: 1. Lightweight with excellent overall bending and torsional rigidity. 2. Low cabin floor height, resulting in compact vehicle height dimensions. 3. Primarily uses sheet metal processing and spot welding, facilitating mass production. 2. Disadvantages: 1. Road and engine noise/vibrations are more easily transmitted into the cabin. 2. Since the entire body ensures structural rigidity, modifications are challenging.
16
5
Share

What is the battery model of Jetta?

The new Jetta uses a 12V-51A Fengfan battery. Generally, the service life of a car battery is 2-3 years, while the original battery of a new car can last for more than 3 years. Therefore, if the battery has been in use for about two years, you should pay attention as its service life may have expired, and it's time to check it more frequently. Car battery maintenance tips: First: Remember to turn off the lights and audio system before turning off the car: Lights are used most frequently while driving. Additionally, some drivers enjoy playing music, which increases the battery's power consumption to some extent. Therefore, drivers should always remember to turn off the lights and audio system before parking and turning off the engine. Leaving them on for a long time will put extra strain on the battery, which is detrimental to its lifespan. Second: Develop the habit of turning off the air conditioning before shutting down the car: Compared to other power-consuming devices like car lights, audio systems, and cigarette lighters, the air conditioning consumes much more power, especially during winter and summer when it is used most frequently. Third: Avoid long-term parking of the car: Do not leave the car parked for extended periods, turning it into a 'zombie car,' as the battery will gradually lose charge. When you need to use the car, it might be difficult to start. Therefore, even if you use the car infrequently, make sure to take it out for a drive periodically to keep the battery fully charged.
19
4
Share

What is the normal fuel consumption for the Nissan Qashqai 2.0?

2.0L models have an average fuel consumption of approximately 8.9 liters per 100 kilometers. Below is an introduction to the Qashqai: 1. Introduction One: The Qashqai is a compact SUV under the Nissan brand. The new Qashqai is equipped with a 2.0-liter naturally aspirated engine. The engine code is MR20, with a maximum power of 113 kW and a maximum torque of 204 Nm. The maximum power is achieved at 6000 rpm, and the maximum torque is achieved at 4400 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. 2. Introduction Two: The Qashqai has a very attractive appearance, making it highly popular among consumers in China. The Qashqai enjoys a strong reputation and excellent sales performance in the domestic market.
1
2
Share

How to Activate Volvo's Automatic Air Ventilation Function?

Remote key unlock, do not open the car door, stand near the car, and the automatic air ventilation function will activate, lasting for about 1 minute. Here are the relevant details: 1. The prerequisite for automatic air ventilation is that the temperature difference between the inside and outside of the car is more than 10°C. This function is particularly suitable for summer. 2. Benefits of automatic air ventilation: Besides replacing the air inside the car, it may also help lower the temperature inside the car. However, when the car door is opened, this function stops immediately. Therefore, when using the remote key to unlock the car, if you hear the sound of a fan in the engine compartment, don't worry, this is the car's automatic air ventilation function, aiming to provide the owner with better natural air when sitting inside the car.
3
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.