Must the battery of Lynk & Co 01 be replaced at a 4S store?
1 Answers
There are no strict regulations on this matter. You can choose either a repair shop or a 4S store for battery replacement. Here are some battery maintenance tips: 1. Dust cleaning: Use a damp cloth to wipe the exterior of the battery, removing dust, grease, white powder, and other contaminants that may cause leakage from the panel and terminals (positive and negative poles). Regular cleaning prevents the accumulation of white acidic corrosion powder on the terminals, thereby extending the battery's lifespan. 2. Check the water level: Open the battery's water-filling cap to see if the water level is within the normal range. There are usually upper and lower limit markers on the side of the battery for reference. If the water level is below the lower marker, distilled water must be added. If distilled water is not immediately available, filtered tap water can be used as an emergency measure. Do not overfill; the standard is to add water up to the midpoint between the upper and lower markers. 3. Check the charging status: Visually inspect the battery after starting the engine by opening the water-filling cap and observing whether bubbles are emerging from each small compartment. Normally, there should be continuous bubbles rising to the surface, increasing with engine acceleration. If no bubbles are observed, there may be an issue with the charging system. Important note: Hydrogen gas is produced during this inspection, so smoking is strictly prohibited to avoid the risk of explosion or fire.
