Must Points Deducted from Driver's License Be Processed Within One Month?

2 Answers
JudahAnn
07/29/25 3:04am
Different point deduction situations have different processing times: Speeding: For speeding violations, you must go to the local traffic police station to handle the penalty within 15 days after the violation. If you fail to do so within 15 days, a late fee of 3% per day will be charged, but the late fee will not exceed double the original fine amount. Electronic Monitoring Photography: If the violation is captured by electronic monitoring, the vehicle owner can check the violation record on the traffic website and then go to the local traffic police station to handle it within one month before the vehicle's annual inspection. There's no need to process it within 15 days. However, be careful not to exceed the driver's license point cycle to avoid accumulating 12 points in the next cycle due to untimely clearance. Electronic Surveillance Capture: For violations captured by electronic surveillance, there is no processing time limit. You can handle it a few days before the vehicle's annual inspection or a few days before the driver's license point cycle is cleared. For violations handled by on-site traffic police enforcement, they should be processed within the specified time; otherwise, a late fee will be charged at 3% per day, with the maximum not exceeding the fine amount.
Was this review help?
7
2
Share
MacAutumn
08/12/25 6:57am
I've been driving for nearly twenty years and have extensive experience dealing with license points deductions. After points are deducted from your license, the deduction itself is automatically recorded by the system, so there's no need to specifically handle it within a month. However, fines must be paid within 15 days, otherwise late fees will be incurred, and the longer you delay, the more the fine increases. If you accumulate up to 12 points, you'll have to go to the DMV for re-education or retake the driving test, or even have your license suspended. Once, I forgot to pay on time and ended up paying extra fines for nothing, almost delaying my annual inspection. Nowadays, it's much more convenient with the 12123 APP—you can handle payments and other matters right on your phone. I remind everyone to act quickly after a violation, but the real key is safe driving to minimize points deductions.
Was this review help?
15
0
Share
Expand All
More Forum Discussions

What is the Volkswagen T-Cross?

Volkswagen T-Cross is the production version of the Volkswagen T-Roc concept car launched by Volkswagen in the fourth quarter of 2017. The Chinese name for the Volkswagen T-Cross is 'Tukai,' and it is a compact SUV under the Volkswagen brand. The Tukai brings consumers a sense of freshness in its design, featuring a strong crossover style and a color-contrasting interior that enhances its youthful appeal. More details about the Tukai are as follows: 1. In terms of exterior design, the Tukai adopts the brand's signature front face design, with a dual horizontal chrome grille connected to the headlights. The lens-type LED headlights are slightly raised upwards, and the fog light area below is linked by a chrome trim strip, complemented by a large black air intake at the bottom, creating a rich sense of layering. The body dimensions are 4218/1760/1589 mm, with a wheelbase of 2651 mm. A straight waistline extends from the front fender to the rear, giving the vehicle a sporty feel. 2. For the interior, the Volkswagen T-Cross maintains the latest family design language, with irregular shapes used in multiple areas to highlight a youthful interior. The new car features a full LCD instrument panel, an 8-inch multimedia central control screen, and a three-spoke multifunction steering wheel. Additionally, the gear lever adopts a brand-new design. In terms of features, the new car includes wireless charging, a BeatsAudio sound system, Apple CarPlay, and Android Auto. 3. Under the hood, the new car is equipped with a 1.5L naturally aspirated engine and a 1.4T turbocharged engine. The 1.5L engine delivers a maximum power of 81kW, 116 horsepower, and a peak torque of 150N·m, while the 1.4T turbocharged engine offers a maximum power of 110kW, 150 horsepower, and a peak torque of 250N·m. For transmission, it is paired with a 6-speed manual gearbox or a 7-speed dual-clutch transmission.
14
0
Share

Is there a first aid kit in the Nissan X-Trail?

Nissan X-Trail does not come with a first aid kit. If needed, car owners can purchase one themselves and place it in the trunk of the vehicle. Models equipped with car first aid kits usually store them in the trunk, typically near the spare tire or next to the fire extinguishers on both sides. Below is relevant information about car first aid kits: 1. A car first aid kit is a package containing medicines and emergency equipment, primarily used for self-rescue in case of a traffic accident. So far, there are no specific regulations in China mandating that cars must be equipped with first aid kits, but some cities have included it as one of the mandatory requirements. 2. A car first aid kit generally includes triangular bandages, elastic head covers, emergency blankets, buckle-type tourniquets, medical gloves, hemostatic pads, disposable instant cold packs, band-aids, iodine swabs, isolation masks, motion sickness medicine, gauze, etc. The contents of first aid kits may vary slightly depending on the car model.
10
2
Share

How to Use the Cruise Control in the Verano?

When the vehicle's speed reaches above 40 km/h, turn on the cruise control switch, then press the deceleration button to set the desired speed. The car will maintain the set speed, and pressing the deceleration button again will activate the cruise control function. To deactivate it, simply press the brake pedal, and it will automatically turn off. The Verano's cruise control system only works when the speed is above 40 km/h. Below are some precautions for using cruise control: 1. Do not use the speed control system on roads with heavy traffic or poor road conditions (such as slippery surfaces, loose gravel, or roads after heavy rain). 2. After the system is activated and the speed is above 40 km/h, do not shift the gear lever into neutral without pressing the clutch pedal, as this may cause the engine to over-rev and result in damage. 3. If the set cruising speed is too high compared to the current traffic conditions, do not resume the set speed.
1
0
Share

What is the difference between Lavida sheet metal and Lingdong sheet metal?

There is no difference; the sheet metal is the same, but the operations might vary depending on different professionals. Automotive sheet metal is a technical method of car repair, where automotive sheet metal is equivalent to automotive sheet metal repair. It refers to the repair of the car body after a collision, encompassing all tasks except for the anti-corrosion and decorative spray painting of the body. More detailed information is as follows: 1. Automotive sheet metal is a processing method for car repair, also known as cold working. If the car body's exterior is damaged or deformed, the sheet metal process is required. 2. Automobile collision repair has evolved from the original 'hammering, pulling, welding, and patching' to the secondary manufacturing and assembly of the car body. The repair of collision-damaged vehicles is no longer just about hammering and shaping the sheet metal, nor can the repair quality be judged solely by visually inspecting the vehicle's appearance and gaps. Repair personnel must not only understand the car body's technical parameters and dimensions but also master the characteristics of the body materials, the transmission of force characteristics, the trend of body deformation, stress points, and the body's production processes such as welding techniques. Based on this knowledge, repair personnel also need to use advanced measuring tools to perform precise three-dimensional measurements of the car body. This helps determine the direct and indirect damage and deformation of the body, as well as potential hazards caused by body deformation, to formulate a comprehensive body repair plan. Then, by applying the correct repair techniques and accurate three-dimensional dimensional data of the body's key points, the key points of the body can be restored to their original positions, bringing the damaged body back to its factory condition.
4
3
Share

Is the Lynk & Co 03 Engine Made by Volvo?

Lynk & Co 03 engine is a Volvo engine, and the Lynk & Co 03 is built based on the CMA architecture jointly developed by Geely and Volvo. More details about the Lynk & Co 03 engine are as follows: 1. When the Lynk & Co 03 was launched, it came with three engine options: the first being a low-power version of the 1.5L turbocharged engine, the second a high-power version of the 1.5L turbocharged engine, and the last a 2.0L turbocharged engine. 2. The maximum power outputs of these three engines are 115kw, 132kw, and 140kw respectively, showing a significant difference in power. However, the common feature of these engines is that they all incorporate direct fuel injection technology and use aluminum alloy cylinder heads and blocks. As for the transmission, the 1.5L turbocharged engines are paired with a 7-speed dual-clutch transmission, while the 2.0L engine is matched with a 6-speed automatic transmission.
13
4
Share

What is the difference between Suzuki and Haojue Suzuki?

The differences between Suzuki and Haojue Suzuki are as follows: 1. The manufacturers of the Haojue brand and Suzuki brand are different: Haojue brand products are independently produced by Haojue Company, while Haojue Suzuki brand products are jointly produced by Haojue Company and Japan's Suzuki Company. The former is independently produced, while the latter is jointly produced. 2. The vehicles of the Haojue and Haojue Suzuki brands are different: Haojue Suzuki brand vehicles mainly include models like Zhuanbao, EN, GZ, GN, Neptune, Fuxing, Jin, Lan, and Red Giant, while Haojue brand vehicles mainly include models like HJ125-7 Yinbao, HJ125-8, HJ125-2, Yuexing, and Shidai Zhixing. 3. The engines used in the two products are also different: There is a significant difference in engine technology between Haojue and Haojue Suzuki. Taking underbone motorcycles as an example, the engines of domestic brand underbone motorcycles are mostly imitations of Honda's underbone engine technology, and Haojue is no exception. However, Haojue Suzuki's underbone motorcycles are mainly based on the FW110, with an engine system of its own. Even for sport bikes, Haojue imitates Honda rather than Suzuki.
7
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.