Must a Financed Car Be Licensed at a 4S Shop?

1 Answers
EdwardLynn
07/30/25 6:34am
When purchasing a car with a loan from a 4S shop, you can handle the vehicle licensing yourself; it is not mandatory for the shop to take care of it. Below is additional information: Materials required for registration application: Identity proof of the vehicle owner; proof of vehicle origin such as the purchase invoice; vehicle manufacturing qualification certificate or import certificate for imported vehicles; proof of vehicle purchase tax payment or tax exemption certificate; compulsory traffic accident liability insurance certificate; vehicle and vessel tax payment or tax exemption certificate; other proofs and documents required by laws and administrative regulations during vehicle registration. For vehicles not imported through customs or exempt from safety technical inspections as stipulated by the national vehicle product authority, a vehicle safety technical inspection certificate must also be submitted. Cases where registration will not be processed: Invalid proofs or documents submitted by the vehicle owner; altered vehicle origin proof or discrepancy between the vehicle owner recorded in the origin proof and the identity proof; discrepancy between the submitted proofs and the vehicle; vehicles manufactured without approval from the national vehicle product authority or imported without approval from the national import vehicle authority; discrepancy between the vehicle's technical data and the data announced by the national vehicle product authority; vehicle model, engine number, vehicle identification number, or technical data not complying with national safety technical standards; vehicles meeting the national mandatory scrapping standards; vehicles sealed or seized by courts, procuratorates, or administrative law enforcement departments; stolen or robbed vehicles; other circumstances not in compliance with laws and administrative regulations.
Was this review help?
2
2
Share
More Forum Discussions

What is the reason for the gw250f1 light coming on?

gw250f1 light coming on indicates a fault in the fuel injection system. It is necessary to go to the after-sales service to read the fault code based on the flashing of the indicator light to determine the fault. The following are specific introductions about the fuel injection system: 1. Introduction: The electronically controlled gasoline injection system uses the electronic control unit as the control center and utilizes various sensors installed on the engine to measure various operating parameters of the engine. Then, according to the control program pre-stored in the computer, it precisely controls the fuel injection quantity of the injector, so that the engine can obtain the best air-fuel ratio of combustible mixture under various working conditions. 2. Principle: Using various sensors installed on different parts of the engine and the vehicle, the system measures various working parameters of the engine. Through the set control program and data, it precisely controls the fuel injection timing of the fuel injection pump, so that the engine can obtain the best fuel injection timing under various working conditions, meeting the requirements of output torque, low fuel consumption, and emission standards.
19
5
Share

What Causes the Squeaking Noise When the Front Wheels Go Over Bumps?

Front wheels squeaking when going over bumps is usually caused by damaged rubber bushings in the shock absorber system, and replacing them can resolve the issue. Below are specific details about the shock absorber system: 1. Introduction: In the suspension system, vibrations are generated when elastic components are impacted. To improve ride comfort, shock absorbers are installed in parallel with the elastic components in the suspension. Most shock absorbers used in automotive suspension systems are hydraulic shock absorbers designed to dampen vibrations. 2. Principle: The working principle involves the piston inside the shock absorber moving up and down when relative motion occurs between the frame (or body) and the axle due to vibrations. The oil in the shock absorber chamber repeatedly flows from one chamber to another through various orifices.
9
0
Share

Should I buy the 2019 or 2021 Lavida?

This depends on the owner's personal needs. The differences between the 2019 Lavida and the 2021 Lavida are: 1. Different body dimensions: The 2019 Lavida has a body length, width, and height of 4613mm, 1765mm, and 1460mm respectively; the 2021 Lavida has a body length, width, and height of 4670mm, 1806mm, and 1474mm respectively. 2. Different wheelbase: The 2019 Lavida has a wheelbase of 2610mm; the 2021 Lavida has a wheelbase of 2688mm. 3. Different engines: The 2019 Lavida is equipped with an EA211dlf engine; the 2021 Lavida is equipped with an EA211dmb engine. 4. Different lighting configurations: The 2019 Lavida uses halogen light sources for its high and low beam headlights; the 2021 Lavida uses LED light sources for its high and low beam headlights.
14
1
Share

What is the reason for the anti-skid off light on the Pajero after power failure?

It may be due to a malfunction of the anti-skid system and needs to be handled at a repair shop. Anti-skid off means the vehicle's electronic stability control system is turned off. More details are as follows: 1. Definition: The ESP function, known in Chinese as anti-skid, is an active safety feature. ESP is enabled by default, and in these cases, you need to press the ESP switch. 2. Working principle: Simply put, when the speed difference between the left and right wheels exceeds the threshold set by the computer, the computer will assume that the vehicle is skidding or fishtailing. It will then take appropriate actions such as braking individual wheels and reducing the engine output torque (controlling engine speed) to manage and prevent the vehicle from skidding or fishtailing.
2
3
Share

Can the Ora be Charged in the Rain?

Taking the Ora Black Cat as an example, the Ora Black Cat can be charged on rainy days. Here is a detailed introduction to the Ora Black Cat: 1. Overview: The Ora Black Cat is a new energy vehicle built on China's first dedicated electric vehicle platform, the ME platform, developed by Great Wall Motors. The Ora Black Cat offers 12 exterior colors and 8 interior colors, including the exclusive new primrose pink and rose gold options, along with rich interior color choices such as titanium white and starlight silver. 2. Other details: The Ora Black Cat has a body length, width, and height of 3495/1660/1530 mm, respectively, with a wheelbase of 2475 mm, accounting for over 70% of the vehicle's length. The long-range model is equipped with an electric motor with a maximum power of 45 kW and a peak torque of 130 Nm, offering a maximum range of 405 km.
20
5
Share

Which Pedal is the Brake and Which is the Clutch in a Car?

In a manual transmission car, there are three pedals: the leftmost is the clutch, the middle one is the brake, and the rightmost is the accelerator. Here are specific introductions about the brake and clutch: 1. Brake: The car's brake pedal is located below the steering wheel. Pressing the brake pedal causes the brake lever to engage, applying pressure that is transmitted to the brake pads on the brake drum, which then clamp the brake disc, slowing or stopping the car. 2. Clutch: The clutch is located within the flywheel housing between the engine and the transmission. The clutch assembly is secured to the rear plane of the flywheel with screws, and the output shaft of the clutch is the input shaft of the transmission. While driving, the driver can press or release the clutch pedal as needed to temporarily disconnect or gradually engage the engine and transmission, thereby cutting off or transmitting the power from the engine to the transmission.
5
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.