Measured Ground Clearance Height of the 2021 Teana?

2 Answers
DiElla
09/03/25 3:53am
2021 Teana's measured ground clearance height is 132 millimeters. The minimum ground clearance of the 2021 Teana refers to the distance between the lowest point (excluding wheels) and the supporting plane, which indicates the vehicle's ability to pass obstacles like rocks and tree stumps without collision. Generally, the higher the ground clearance of the 2021 Teana, the better its off-road capability. However, if the ground clearance is too high, the stability during high-speed driving may decrease. The 2021 Teana is a premium mid-to-high-end luxury sedan under the NISSAN brand. It is equipped with either a 2.0L or 2.5T engine, delivering maximum output power of 156 horsepower and 243 horsepower, respectively. The dimensions of the 2021 Teana are 4901mm in length, 1850mm in width, and 1450 (1447)mm in height, with a wheelbase of 2825mm, presenting a very elegant exterior. Typically, the ground clearance for sedans ranges between 110mm and 150mm, while SUVs have a ground clearance between 200mm and 250mm. However, the ground clearance of the 2021 Teana is not static; it varies depending on the load condition. Therefore, changes in ground clearance should be considered based on the vehicle's load variations. When selecting a vehicle, ground clearance can be one of the reference factors. The choice should depend on the vehicle's intended use and the road conditions. For urban areas with well-paved roads, a vehicle with lower ground clearance can enhance stability and comfort. For frequent travel to remote areas or driving on rough terrains, a higher ground clearance is advisable to improve off-road performance and avoid undercarriage scrapes or damage.
Was this review help?
12
2
Share
VonNolan
09/15/25 5:32am
I recently checked the data of the 2021 Teana, and the actual measured ground clearance is approximately 138 mm. Many car enthusiasts on forums have reported similar measurements during their tests. For example, during my test drive last weekend, I used a tape measure to measure it under no-load conditions, and it was indeed close to this value—the distance from the bottom of the front wheel to the ground fluctuated between 130-140 mm, mainly depending on tire pressure and road surface flatness. This height is moderate, making it easy to navigate speed bumps in urban driving without being too low to scrape the undercarriage or too high to affect handling. Of course, if you frequently drive on rough roads or carry heavy loads, the clearance may decrease slightly, so it's advisable to regularly check and maintain the tire pressure at the standard value. When choosing a car, I also compared it with the Accord and Camry in the same class and found that the Teana's design is quite practical, ensuring both comfort and a bit of off-road adaptability.
Was this review help?
13
1
Share
Expand All
More Forum Discussions

What are the reasons why the Transit won't start?

The reasons why the Transit won't start include a dead battery, an empty fuel tank, or incorrect gear position. Here is some relevant information about the Transit: 1. Introduction: The Classic Transit was the first model introduced by Ford Europe into the Chinese market. 2. Applications: It is widely used in logistics transportation, passenger commuting, and as a base vehicle for modifications to meet the needs of various industries. Its maximum loading space can reach 11.5 cubic meters, and it offers models with 3 to 17 seats. 3. Development: As the first commercial vehicle model introduced by Ford into the Chinese market, the Classic Transit has received high praise from the market. It is used in logistics transportation, passenger commuting, business reception, and as a base vehicle for modifications to meet the needs of various industries.
12
3
Share

What does a car displacement of 1497ml mean?

Car displacement of 1497ml refers to an engine displacement of 1.497L. Displacement is a crucial structural parameter that comprehensively measures the size of an engine. The performance indicators of an engine are closely related to its displacement. Generally, the larger the displacement, the higher the power output. Displacement per unit is commonly used as a basis for comparing different engine sizes. The following provides an introduction to engines: 1. Definition and classification of engines: An engine is a machine that converts other forms of energy into mechanical energy. Modern engines are categorized into internal combustion engines, external combustion engines, jet engines, and electric motors. 2. The birthplace of engines: The engine is a vital component of a vehicle, with the earliest engines originating in the UK. 3. Methods to distinguish engines: The parameter used to differentiate engines is engine displacement. Engines with larger displacements typically have stronger power output and better performance.
9
5
Share

Where is the Body Computer Located in the Geely Borui?

Geely Borui's body computer is located in the heat shield near the cabin in the engine compartment. Below is more information about the body computer: 1. Definition: The body computer is a specialized automotive information product developed specifically for the unique operating environment and electrical circuit characteristics of automobiles. It features high temperature resistance, dust resistance, shock resistance, and seamless integration with automotive electronic circuits, serving as a highly integrated in-vehicle multimedia entertainment information center. 2. Functions: The body computer can perform all the functions of a home computer, supporting in-car internet access, audio-visual entertainment, satellite positioning, voice navigation, gaming, telephone functions, as well as specific features like visual reverse parking and fault detection. Its main functions include comprehensive in-vehicle multimedia entertainment, GPS satellite navigation, professional diagnosis of vehicle information and faults, and mobile office and industry applications.
13
4
Share

What is the fuel consumption of the Chery Tiggo 8 Kunpeng Edition?

Chery Tiggo 8 Kunpeng Edition has a declared MIIT fuel consumption of 8-9 liters per 100 kilometers. Here is some related information about the Tiggo series: 1. Introduction: Since its launch in 2005, the Chery Tiggo has been exported to over 80 countries and has won the trust and praise of more than 400,000 users worldwide. With its outstanding quality, it has become the official designated vehicle for multiple international events. The Tiggo series has formed a family lineup including the Classic Edition, Elite Edition, and DR European Edition. While reshaping the high-end quality image of Chinese independent brands, it has also become a recognized independent brand model that meets international standards both domestically and internationally. 2. Powertrain: The powertrain is equipped with a 2.0DVVT engine, with a maximum output power of 138 horsepower and a peak torque of 180N·m. There are reports that a 1.4TGDI engine will be added in 2014.
11
0
Share

What does C1D mean?

C1D is a combined driver's license for motor vehicles and motorcycles, which adds the permitted vehicle types of a motorcycle license to the existing motor vehicle license. To apply for the D license endorsement, you must have held a C1 driver's license for more than one year and have no record of accumulating 12 penalty points in the current scoring cycle or the most recent scoring cycle prior to application. Driver's license classification: Motor vehicle driver's licenses are divided into 16 categories: A1, A2, A3, B1, B2, C1, C2, C3, C4, C5, D, E, F, M, N, and P. C1 driver's license: The C1 driver's license is one of the motor vehicle license codes. The permitted driving scope of a C1 license includes small and mini passenger vehicles, light and mini cargo vehicles, as well as light, small, and mini special-purpose vehicles. Small passenger vehicles must have a seating capacity of 9 or fewer people.
15
2
Share

How Long Can Car Tires Stay Submerged in Water Without Issues?

Car tires submerged in water for a day or shorter periods typically experience no adverse effects. However, prolonged submersion of tires or parking the vehicle in water levels exceeding the wheel hubs can significantly impact the wheel hubs and brake components. Since both wheel hubs and brake parts are made of metal, prolonged water exposure triggers oxidation reactions, leading to rust formation. This compromises the vehicle's braking performance. Additional Information: Rusted components may cause steering wheel vibrations during braking or produce abnormal noises. For minor rust on wheel hubs and brake parts, treatment involves sanding with fine-grit sandpaper to remove rust before normal use. Severe corrosion necessitates replacement. To prevent rust damage to wheel hubs and brake components, always relocate the vehicle to a safer area if encountering deep water accumulation.
15
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.