Location of the Porsche 718 Fuel Tank?

2 Answers
DiMax
07/29/25 4:24am
Here is the relevant introduction about the location of the Porsche 718 fuel tank: 1. The Porsche 718 differs from the front-engine design of ordinary cars: It adopts a mid-engine, rear-wheel-drive layout. The engine is located behind the driver. To keep the fuel tank away from the engine, the fuel tank is positioned at the front of the vehicle, hence the fuel filler cap is located on the fender of the Porsche. It not only features a front trunk but also a spacious rear trunk, significantly enhancing practicality. 2. Additional Information: The Porsche 718 is stylish and elegant, with an attractive front design and sleek body lines. It offers excellent comfort, with comfortable seats and fast air conditioning cooling.
Was this review help?
13
4
Share
DeFelix
08/12/25 8:07am
The fuel filler cap of the Porsche 718 is located at the upper rear of the front wheel arch, on the passenger side of the body. It's easy to find - just look around the right front wheel after parking, and you'll spot a small cover marked with a triangular arrow. As a mid-engine sports car with the engine positioned behind the seats, the designers deliberately moved the fuel tank forward. This helps balance the weight distribution between front and rear, making cornering more stable. When refueling, press the button on the key fob to automatically pop open the cap, but remember to turn off the engine first. Once, a friend drove my car to refuel and circled three times before finding it, much to the amusement of the gas station attendant. Be sure to use premium 95 octane or higher gasoline - the fuel grade is clearly marked on the fuel filler cap.
Was this review help?
10
2
Share
Expand All
More Forum Discussions

What type of engine oil is suitable for the Civic?

Civic uses 0W20 full synthetic engine oil. The meaning of 0W20 and the functions of engine oil are as follows: Meaning of 0W20: 0 represents the viscosity of the engine oil, with 0 being the smallest, indicating that the oil has lower viscosity at low temperatures and better fluidity. W stands for winter-grade engine oil. 20 is the oil viscosity, with 20 representing lower viscosity, suitable for low-temperature use. The higher the number, the higher the operating temperature it can handle. The choice of engine oil should be based on the operating temperature of the vehicle. Functions of engine oil: Engine oil lubricates and reduces friction in the engine, assists in cooling, provides sealing to prevent leaks, prevents rust and corrosion, and acts as a shock absorber. It is often referred to as the "blood" of a car. The engine is the heart of the car, containing many metal surfaces that move against each other at high speeds under harsh conditions, with operating temperatures reaching 400 to 600 degrees Celsius. In such extreme conditions, only qualified lubricating oil can reduce wear on engine components and extend their service life.
18
3
Share

Where is the Cruze oil pressure sensor located?

The oil pressure sensor of the Cruze is installed on the right side of the water pump. The engine oil pressure sensor monitors the oil pressure. If the oil pressure is too low, a warning light will appear on the dashboard to alert the driver. Here is some relevant information: 1. Minimum pressure: The minimum oil pressure for the Cruze should not exceed 130 kPa, meaning the acceptable range is between 130 and 350 kPa. However, the measurement should be taken at a water temperature of 80°C, and the normal standard value should be around 250 kPa. 2. Function: Pressure sensors are primarily mechanical devices that indicate pressure through the deformation of elastic elements. However, these structures are large in size and heavy in weight, and they cannot provide electrical output. With the development of semiconductor technology, semiconductor pressure sensors have emerged. They are characterized by small size, light weight, high accuracy, and good temperature characteristics. Especially with the advancement of MEMS technology, semiconductor sensors are becoming more miniaturized, with low power consumption and high reliability.
11
3
Share

What does the automotive DC module mean?

Automotive DC module refers to the direct current power control module. The following is a related introduction: 1. Uses direct current: Since one of the power sources in a car is the battery, which is a DC power source, and the battery must be charged with a DC power source after discharge. Therefore, the generator in the car must also output direct current. 2. Uses low-voltage power: The rated voltage of the automotive electrical system is either 12V or 24V. Currently, gasoline vehicles generally use a 12V power source, while heavy-duty diesel vehicles mostly use a 24V power source. 3. Uses a single-wire system: Normally, the connection between an electrical device and the power source requires two wires, one as the live wire and the other as the neutral wire, to form a circuit. However, all electrical devices in a car are connected in parallel, with good conductivity. 4. Negative grounding: Since cars use a single-wire system, one of the two lines in the electrical system must be replaced by the car's metal body. When wiring, one pole of the power source and one end of the electrical device must be connected to the metal body. This connection is called grounding.
16
5
Share

Detailed Introduction to the Features of the 2021 Corolla Hybrid?

The Corolla Hybrid features three driving modes: EV Electric Mode, ECO Energy-saving Mode, and POWER Dynamic Mode. Below is an introduction to these three driving modes: EV Electric Mode: Press the EV button to enter a state where the vehicle is powered solely by the electric motor. This not only reduces exhaust emissions but also provides a unique driving experience. ECO Energy-saving Mode: This mode offers a more ideal driving state, achieving both practicality and environmental friendliness. POWER Dynamic Mode: Press the POWER button to instantly enhance throttle response sensitivity, delivering robust power, especially when driving on slopes or highways. Brake Energy Recovery System: Hybrid vehicles have a core component called the brake energy recovery system. When releasing the accelerator or lightly pressing the brake pedal, the traditional braking system is not engaged. Instead, the brake energy recovery system provides braking force while converting the vehicle's kinetic energy into electrical energy, which is stored in the battery. During gentle deceleration, a significant amount of braking energy can be recovered and converted into electrical energy for the vehicle's use. However, during hard braking, much of the kinetic energy is wasted as useless heat.
20
0
Share

What is the reason for the malfunction of the fuel gauge in the Venucia R50?

The reason for the malfunction of the fuel gauge in the Venucia R50 is either the fuel gauge pointer moving irregularly or an issue with the fuel level sensor. Irregular pointer movement: This is usually manifested as the fuel gauge pointer dropping slowly in the first half of the gauge, but after passing the middle mark, the pointer drops rapidly. However, the irregular movement of the fuel gauge pointer cannot be considered a fault. This is related to the design of the fuel pump used to reflect the fuel level, which cannot uniformly reflect the fuel consumption. Such uniform changes are difficult to achieve, and it is also impossible to alter this by repairing or replacing parts. Issue with the fuel level sensor: The fuel gauge indication depends on the fuel level sensor. When this issue occurs, it indicates a problem with the vehicle's fuel level sensor. It is likely that the fuel level sensor has become contaminated and not cleaned in time. It is important to note that gasoline contains many impurities, and the fuel level sensor, constantly immersed in it, can become polluted over time, directly affecting the accuracy of the indication.
1
3
Share

Do I need to turn on the Bluetooth for ETC?

You do not need to turn on the Bluetooth for ETC during activation. Methods to activate ETC: Insert and remove the ETC card twice consecutively until the electronic tag screen displays 'Bluetooth is on.' If it shows 'Tag invalid' when inserting and removing twice without attaching the electronic tag, this is normal and does not affect activation. Alternatively, you can directly press the button on top of the electronic tag to enable the Bluetooth function. Turn on your phone's Bluetooth, open the corresponding mobile app (usually with a download QR code on the electronic tag), and enter the device activation interface. Click 'Device Connection' and wait patiently for the 'Connection Successful' prompt. Once connected, upload a photo of the vehicle's front to complete activation. ETC installation positions: For small vehicles like cars and minivans, the ETC card and OBU device are installed in the upper middle part of the front windshield. For large vehicles like trucks and buses, the installation position is on the upper part.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.