Location of the Elantra Cigarette Lighter
1 Answers
The Elantra cigarette lighter is located near the gear shift lever. Below is relevant information about the Elantra: The installation and removal method for the cigarette lighter is as follows: 1. Unscrew the housing: For some vehicles, the cigarette lighter socket has a threaded housing at the back. It can be unscrewed counterclockwise and reinstalled by turning clockwise. 2. Remove screws: For some vehicles, the cigarette lighter socket is secured with screws. Simply use a wrench to remove the screws for disassembly, and reinstall by tightening the screws. 3. Remove the panel: Remove the gear shift lever panel, which is held by plastic clips. You can pry one side up by hand or with a flathead screwdriver to detach the entire panel. 4. Remove panel screws: After removing the gear shift lever panel, the cigarette lighter panel door will open automatically. You will see two black screws, which can be removed using an M4 hex wrench. 5. Remove the panel box: Pull the cigarette lighter plastic panel box out by hand. When it is extended about 10 cm, disconnect the wiring before fully removing the entire box. 6. Operate the inner and outer rings: The cigarette lighter consists of an outer and inner ring. Press the inner ring in during use. Once it reaches a certain temperature, the inner ring will automatically return to its original position. Then, you can pull it out by gripping the outer ring.
