···
Log in / Register

Location of the BYD F3 Fuel Filter?

4 Answers
VonSadie
08/26/25 3:40am
The fuel filter of the BYD F3 is installed in front of the fuel tank at the bottom of the vehicle body, secured with disposable clips at both ends. The general replacement interval is 10,000 km, with a mandatory replacement interval of 30,000 km. The fuel filter, as the name suggests, is a device that filters impurities from gasoline. Below is additional information: Hazards of not replacing the fuel filter for an extended period: The vehicle may experience insufficient power during rapid acceleration and slower starting speeds. Difficulty in starting, requiring multiple attempts to start successfully, and sometimes even needing to press the accelerator to start. A clogged fuel filter reduces fuel supply pressure, increasing the working pressure on the fuel pump, which can further lead to damage to the fuel pump. This may result in sudden engine stalling while driving, posing certain safety risks.
Was this review help?
13
2
Share
Presley
09/08/25 4:24am
I used to own a BYD F3, where the fuel filter is typically located under the chassis, near the rear wheels, or beside the fuel tank. During every maintenance session, I personally inspected it by lifting the car—it's hidden inside a protective casing. Maintenance requires replacement every 20,000–30,000 km; otherwise, accumulated impurities can shorten the fuel pump's lifespan. The design is relatively concealed, requiring careful handling with tools. I often remind myself not to skimp on fuel quality—though small, it’s crucial for smooth engine performance. After replacement, I noticed smoother power delivery and better fuel efficiency, greatly aiding daily driving. Putting extra effort into maintenance helps avoid major repairs, saving money and hassle in the long run.
Was this review help?
15
4
Share
Expand All
VanMarley
10/22/25 4:28am
As an F3 owner, I've noticed the fuel filter is usually located under the chassis near the rear suspension area, specifically close to the fuel tank outlet. This is a well-chosen position that protects against ground debris impacts. During maintenance, I always check it first – replacement isn't too difficult, but wearing gloves prevents oil contamination. Regular filter changes are crucial, with 30,000 km being the ideal interval to prevent fuel contamination from clogging the system. Delaying replacement may cause slow engine starts or even stalling, compromising both safety and performance. When DIY-ing, follow safety procedures by depressurizing fuel lines to prevent accidents. Keeping the filter clean ensures worry-free long-distance driving.
Was this review help?
13
4
Share
Expand All
HaydenMarie
12/05/25 4:52am
When I first drove the BYD F3, I had a hard time locating the fuel filter. It's usually under the rear seat or on the chassis, near the rear wheels where you can feel it. The first time I learned to replace it, the position seemed inconspicuous but the operation was straightforward. It's recommended for beginners to check it every 20,000 kilometers to prevent clogging from impurities causing malfunctions. After replacement, the car's acceleration became smoother. Using good quality fuel to protect it can extend the engine's lifespan. Simple maintenance can save a lot of trouble, very practical.
Was this review help?
4
5
Share
Expand All
More Forum Discussions

How to Use the Mitsubishi Pajero 4WD?

Usage of Mitsubishi Pajero 4WD: Next to the gear lever, there is a smaller 4WD lever with options H2, H4, H4L, and L4L. Modes with the number 4 are 4WD modes: H2 is high-speed 2WD, H4 is high-speed 4WD, H4L is high-speed 4WD with differential lock engaged, and L4L is low-speed 4WD with differential lock engaged. Simply shift the small lever to the 4WD position. Features of the Mitsubishi Pajero: 1. Exterior: The new Pajero continues the current design, maintaining a boxy and straight style. The front grille extends to the lower bumper, paired with rectangular headlights on both sides, giving it a retro look. 2. Powertrain: The new model continues to be equipped with a 3.0L V6 naturally aspirated engine, delivering a maximum power of 130kW and a peak torque of 255Nm. 3. Transmission: It comes with a 5-speed automatic transmission and is standard with the second-generation Super Select 4WD system.
2
5
Share

How long is the Haval H6?

The length of the Haval H6 is 4615 millimeters. It is a compact SUV under the Haval brand. The Haval H6 is equipped with three engines: a low-power version 1.5-liter turbocharged engine, a high-power version 1.5-liter turbocharged engine, and a 2.0-liter turbocharged engine. The Haval H6 features a horizontally integrated dashboard design with a dynamic aesthetic overall shape, naturally creating a concave space. The fluid texture of the comfortable cockpit provides a relaxed and pressure-free quality space, offering a stylish driving experience. Additionally, the new Carolin Red color scheme, complemented by diamond embossing craftsmanship, brings a new visual enjoyment. The Haval H6 incorporates more fashionable, intelligent, and luxurious urban design elements. With its stylish and elegant exterior, cozy interior, and intelligent equipment throughout the vehicle, it meets the emotional and functional dual needs of urban SUV enthusiasts.
5
4
Share

Can the Car Charge While Idling?

Car can charge while idling. Idling refers to a condition where the engine is running but the car is stationary with the gear in neutral, consuming fuel without moving or performing work. In this state, the battery can be charged. However, the charging duration may be affected by other factors such as the use of high-power devices inside the car, turning on the air conditioning, or external USB power supply, all of which can increase charging time. Charging while idling consumes more fuel, and emissions during idling are highly polluting. Occupants should not sleep in a closed car with the air conditioning on, as incomplete combustion in the engine can produce carbon monoxide, which can accumulate to lethal concentrations inside the car. If charging is necessary, it is recommended to use a dedicated battery charger for the car's battery.
5
5
Share

Where is the keyhole on the Envision?

The Envision does not have a keyhole, as it comes standard with a keyless start system and keyless entry system. Owners can enter the vehicle using the remote key and start the car with the push-button start function. In terms of exterior design, the Buick Envision features Buick's new family design, with significant changes to the front fascia, including minor adjustments to the headlight assembly shape. The area below the headlights has been made more straight, and LED light sources have been added inside the headlight housing. In terms of power, the Envision is equipped with two engine options: a 1.5T and a 2.0T, each available in both front-wheel-drive and all-wheel-drive configurations. The 1.5T engine is paired with a 7-speed dual-clutch transmission, while the 2.0T engine is matched with a 6-speed automatic transmission. The Buick Envision is positioned as a midsize SUV, with body dimensions of 4686mm in length, 1839mm in width, and 1660mm in height, and a wheelbase of 2750mm.
10
2
Share

What type of oil is suitable for the Honda Vezel?

Honda Vezel uses original engine oil, with models 0W-20, 0W-30, 5W-30, and 10W-30. Precautions for changing oil: Choose the oil suitable for the vehicle; change the oil preferably when the engine is warm, and drain all the oil; the oil filter must be replaced when changing oil; the amount of oil added should be appropriate, as indicated by the dipstick; after adding oil, start the engine and check for any leaks. Steps for changing oil: Use a jack to lift the vehicle, locate and unscrew the drain plug to drain the oil; after removing the oil filter, place a container underneath; replace with a new oil filter and add new oil.
8
5
Share

What Causes Wheel Spin During Acceleration?

The reason for wheel spin during acceleration is insufficient tire contact area and inadequate friction, causing slippage when too much power is applied. Methods to prevent wheel spin are as follows: Avoid stopping on slippery surfaces whenever possible: If wheel spin occurs during acceleration, remove mud or snow. On smooth surfaces, spread dry ash, dry sand, or use any anti-slip materials, and start in second gear with light throttle. Use snow chains: On icy or snowy roads, install snow chains (usually only on the rear wheels). For four-wheel-drive vehicles, engage the front drive. Do not use snow chains on muddy roads. Select the correct gear: Choose the appropriate gear based on the road surface friction coefficient and conditions. Start in second gear (first gear is prone to wheel spin), apply light throttle and slowly release the clutch. You can drive at high gear with low speed, but avoid using low gear at high speed, as this can easily cause wheel spin.
9
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.