Left and Right Positions of National Flag and Party Flag on Vehicles

2 Answers
DelAna
07/29/25 11:50am
The Party flag should be placed on the right side, and the national flag on the left side. Specific details are as follows: 1. National Flag Description: The national flag of the People's Republic of China is the Five-Starred Red Flag, with a red field and a length-to-width ratio of 3:2. In the upper left corner, there are five yellow five-pointed stars, with four smaller stars arching around the larger star on its right, each with one point directed towards the center of the larger star. 2. Production and Use of Party Flag: There are five standard specifications for the Party flag: 288 cm in length and 192 cm in width; 240 cm in length and 160 cm in width; 192 cm in length and 128 cm in width; 144 cm in length and 96 cm in width; and 96 cm in length and 64 cm in width. For non-standard specifications required in specific venues, approval must be obtained from the organizational department of the Party committee at or above the county level.
Was this review help?
10
2
Share
LillianaMarie
08/13/25 8:51pm
As a seasoned observer of various vehicle decorations, I've noticed that the placement of the national flag and the party flag on a car is quite particular. Typically, when viewed from the front of the vehicle, the national flag is hung on the right side of the driver's seat, while the party flag is placed on the left. This follows both international and domestic etiquette rules—national symbols take precedence and are placed on the more honorable right side. The logic behind this is simple: it signifies respect for national sovereignty and dignity, with the party flag, as a symbol of a political party, taking a secondary position. When installing them, it's best to secure the flags near the rearview mirror or on both sides of the sunroof, ensuring they are of moderate size and do not obstruct the driver's view to avoid safety hazards. For formal events, I always use professional brackets to securely fasten the flags, avoiding materials that might easily come loose. In short, this arrangement not only reflects proper etiquette but also showcases the owner's sense of identity with the nation and the party, adding a touch of solemnity to the vehicle.
Was this review help?
3
0
Share
Expand All
More Forum Discussions

What is the fuel consumption of the RS7?

RS7 owner average fuel consumption: average fuel consumption of 17.8 liters per 100 kilometers, official fuel consumption: 10.3 liters. Here is additional information: Engine: The Audi RS7 is a mid-to-large-sized imported luxury car, originally equipped with a 4.0T V8 turbocharged engine, providing ample power. Design style: The Audi RS7 concept car was designed by a designer from Austria, and the car's exterior design incorporates the styles of several Audi models. The side body and rear design are very similar to the Audi R8, while the car doors adopt Lamborghini's classic scissor door design.
4
1
Share

How to Tighten Motorcycle Mirrors?

First, take a wrench and loosen the screws on the mirror to make them slack. Hold the mirror with your hand and rotate it counterclockwise until the mirror comes off. Place the removed mirror on the ground to inspect the extent of damage. Adjust the mirror angle and use the wrench to tighten the screws on the mirror.
8
2
Share

How to Reset the Maintenance Reminder for the 2020 Magotan?

First, turn the ignition key of the Volkswagen Magotan to the ON position to illuminate the car's dashboard. Then, press the down button on the steering wheel to locate and select the maintenance option. After entering the maintenance interface, a selection screen will appear; choose the reset option. Finally, the vehicle's maintenance reminder will be canceled.
14
1
Share

What is the correct method for B2 pressing the pancakes?

Use the raised left ridge inside the car hood to align with the direction of the front 1st and 2nd pancakes. When the car is about to pass the 4th pancake, center the steering wheel. Once the car is about to pass the 5th pancake, straighten the steering wheel.
8
1
Share

How to Adjust the Angle of the Wiper Linkage Rod?

First, turn the key to the ON position, activate the wipers, then turn off the switch and the key. At the base of the wiper arm, remove the dust cover, use an appropriate wrench or socket to loosen the screw until it can be rotated. Then lift the wiper blade and gently shake it. Once it becomes loose, position the wiper blade to the desired angle, tighten the screw, and replace the dust cover.
15
2
Share

Difference Between TPR Wheels and Rubber Wheels?

TPR tires are tire products that do not require high wear resistance or strength, whereas rubber tires used in vehicles demand high load-bearing capacity, wear resistance, and mechanical strength. Here is additional information: TPR tires: Primarily used for casters, cart wheels, and toy tires where load-bearing capacity and wear resistance strength requirements are not very high. They are typically made of pure TPR material or a composite of TPR with other materials like PP or ABS through injection molding. Rubber tires: Usually vulcanized rubber tires, used for various vehicle tires. Due to the high demands on load-bearing capacity, wear resistance, and mechanical strength, the material requirements for these tires are stringent. Besides vulcanization, materials like steel wires and nylon fabric are incorporated into rubber tire products to enhance impact resistance and anti-burst performance.
11
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.