Is Wheel Rotation Used for Dynamic Balancing?

What is automotive laminated glass?

Introduction to automotive laminated glass is as follows: 1. Laminated glass refers to a type of transparent adhesive plastic film sandwiched between two or three layers of glass, combining the toughness of plastic with the hardness of glass, thereby enhancing the glass's resistance to breakage. 2. Tempered glass is made by quenching ordinary glass, creating internal stresses that strengthen the glass. When impacted and broken, tempered glass shatters into small, blunt-edged fragments, reducing the risk of injury to passengers. Here is additional information about laminated glass: 1. Laminated glass consists of two or more sheets of glass with one or more layers of organic polymer interlayers. Through special high-temperature pre-pressing and high-pressure processes, the glass and interlayer are permanently bonded into a composite glass product. 2. Common interlayer materials for laminated glass include PVB, SGP, EVA, and PU. As a safety glass, laminated glass does not produce sharp fragments when broken due to the adhesive properties of the PVB interlayer between the two layers of ordinary glass. Additionally, the PVB interlayer provides sound insulation and sunlight control, making it an energy-efficient and environmentally friendly building material. 3. Laminated glass can block 1000 Hz to 2000 Hz coincidence noise that penetrates ordinary glass and can also block over 99% of UV rays and absorb heat from the infrared spectrum. There are also specialized types of laminated glass, such as colored interlayer laminated glass, SGX printed interlayer laminated glass, XIR LOW-E interlayer laminated glass, embedded decorative laminated glass, and PET material embedded laminated glass, which serve both decorative and functional purposes.

14

2

Share

What Causes the Yellow Engine Light to Illuminate in a Car?

The illumination of the yellow engine light in a car indicates that the vehicle has encountered a malfunction. The possible causes include: 1. A malfunction in the engine's fuel supply system. 2. A fault in the engine's ignition system. 3. A problem with the engine's intake system. 4. An issue with the engine's exhaust system, as well as malfunctions in other sensors. The main vehicle warning lights include: 1. The engine indicator light, which shows the operating status of the engine. 2. If the oil warning light remains on while driving, it indicates that the oil level is below the standard value. 3. The tire pressure warning light displays the tire pressure status; if the warning light comes on, it means the tire pressure is insufficient or the tire is damaged. 4. The brake indicator light automatically turns on when the handbrake is engaged and turns off when the handbrake is released. 5. The airbag indicator light shows the operating status of the airbags; it typically performs a self-check when the car is started, and the light turns off after a few seconds.

5

3

Share

What does the C1D driver's license represent?

C1 and D driver's licenses refer to a combined driver's license that permits driving both C1 and D vehicle types. The C1 license allows driving small cars, while the D license permits driving ordinary three-wheeled motorcycles. C1: Small cars, small automatic transmission cars, low-speed trucks, and three-wheeled cars. Small and micro passenger cars, as well as light and micro trucks; light, small, and micro special-purpose vehicles; small passenger cars with a seating capacity of 9 or fewer people. D: Three-wheeled motorcycles with an engine displacement greater than 50ml or a maximum design speed exceeding 50km/h, ordinary two-wheeled motorcycles, and mopeds. Application age: The minimum age requirement for a C1 driver's license is 18 years old, with no upper age limit. The application age for a D driver's license is between 18 and 60 years old, and a medical examination certificate is required for application.

13

3

Share

What could be the possible reasons for vehicle engine shaking?

Reasons for abnormal combustion causing engine shaking, the common causes of abnormal combustion are usually: 1. Abnormal ignition, such as spark plug damage, ignition module failure, etc. 2. Intake and exhaust problems, mainly caused by valve erosion. 3. Engine misfire, this reason is more complex, from the ignition system, to the air-fuel ratio, even the self-learning function of the ECU, can lead to misfire. Reasons for vehicle body shaking during idle: 1. Severe engine carbon buildup. 2. Ignition system problems. 3. Unstable oil pressure. 4. Aging of engine components.

5

Share

Where is the fuse located in the Ford Kuga?

Ford Kuga has three fuse boxes located as follows: 1. There is a front fuse box attached near the positive terminal of the battery in the engine compartment. 2. The fuse box in the passenger compartment is located below the right glove box. 3. The fuse box in the luggage compartment is positioned on the sidewall of the passenger side within the luggage area. Here are the steps to replace a fuse in the Ford Kuga: 1. Locate the fuse box based on your vehicle model. Generally, fuse boxes are situated near the battery. The fuse box is usually secured with clips, and some high-end models may have bolts. Carefully remove the box cover to access the fuses. 2. Refer to the diagram on the fuse box cover to identify the specific fuse. Before removing the fuse, carefully read the diagram—fuses are typically easy to remove. 3. Use tweezers to pull out the fuse and replace it with a new one. The fuse box usually contains spare fuses placed separately from others for easy identification. Remove the fuse with tweezers, check if it is blown, and if so, replace it with an appropriate spare fuse.

3

4

Share

How Often Should Engine Oil and Oil Filter Be Replaced?

Engine oil and oil filter should be replaced at the same interval. Below is an introduction about engine oil: 1. Engine oil is referred to as the blood of the engine. Without engine oil, the engine cannot operate normally. 2. In the engine, oil not only lubricates but also cleans, seals, cushions, prevents rust, and dissipates heat. 3. When the engine is running, oil forms a thin film on the surfaces of various engine components, preventing direct contact and friction between them. If engine components directly contact and rub against each other, it will accelerate engine wear and generate a large amount of heat instantly. 4. Over time, the performance of engine oil deteriorates, so it needs to be replaced regularly. Failure to change the oil for an extended period will increase engine wear. 5. The oil filter is used to filter the oil. Without an oil filter, the oil will become very dirty after some use, which can negatively affect engine lubrication and heat dissipation.

10

0

Share

Is Wheel Rotation Used for Dynamic Balancing?

What is automotive laminated glass?

What Causes the Yellow Engine Light to Illuminate in a Car?

What does the C1D driver's license represent?

What could be the possible reasons for vehicle engine shaking?

Where is the fuse located in the Ford Kuga?

How Often Should Engine Oil and Oil Filter Be Replaced?

Should the Handbrake Be Engaged in N Gear?

When does the vehicle's first maintenance period start?

What Causes the Coolant to Leak Completely?

Can the License Plate Be Retained After Selling the Car?