Is Wheel Alignment Necessary After Tire Rotation?

1 Answers
LaSkylar
07/25/25 9:09am
Tire rotation generally requires a subsequent wheel alignment. It is essential to perform tire rotation in accordance with the vehicle maintenance schedule, especially after the initial break-in period of a new car, as it significantly impacts tire longevity. Therefore, timely tire rotation as specified by the vehicle manufacturer is crucial for extending tire lifespan. Here is more information about wheel alignment: 1. Purpose of Wheel Alignment: Wheel alignment adjusts the four wheels' parameters to ensure optimal driving performance and reliability. 2. Situations Requiring Wheel Alignment Include: (1) Before annual vehicle inspection. (2) When a new car reaches 3,000 kilometers. (3) Every six months or when the vehicle reaches 10,000 kilometers. (4) When replacing steering system components.
Was this review help?
1
5
Share
More Forum Discussions

How many points are deducted for driving or parking in violation of regulations?

When driving through an intersection without following the prescribed driving or parking rules, 2 points will be deducted. Below is a detailed introduction about vehicle violations: 1. Overview: Vehicle violations refer to motor vehicles violating the Road Traffic Safety Law and traffic management regulations. Penalties for vehicle violations include warnings, fines (vehicle impoundment), temporary suspension of driver's license, revocation of driver's license, cancellation of driver's license, administrative detention, and criminal liability for acts constituting a crime. 2. Basis for Penalties: According to the 'Road Traffic Safety Law of the People's Republic of China,' public security traffic management departments and their traffic police should promptly correct road traffic safety violations. Penalties for road traffic safety violations should be imposed based on facts and relevant provisions of this law.
19
3
Share

How Many Centimeters Should You Park from the Curb?

Parking within 30 centimeters from the curb is a requirement in the Subject 2 driving test, and the Subject 3 test also requires parking within 30 cm from the curb. Exceeding 30 cm will result in point deductions. For daily parking, it is also advisable to maintain a distance of no more than 30 cm from the curb. Article 56 of the 'Road Traffic Safety Law of the People's Republic of China' stipulates that motor vehicles shall be parked in designated areas. Parking on sidewalks is prohibited, except in parking spaces marked according to this law. When parking a motor vehicle on the roadside, the correct method for choosing a parking spot is as follows: When parking a motor vehicle, it must be parked in designated areas. If parking on the roadside is necessary, choose to park within marked parking spaces. When temporarily parking on the road, do not obstruct the passage of other vehicles and pedestrians. On roads without marked parking spaces, park as close as possible to the right side of the road, in the direction of traffic, with the vehicle body no more than 30 cm from the road edge. The driver must not leave the vehicle and must depart immediately after passengers alight or items are loaded/unloaded. In case of vehicle breakdown or an accident where the vehicle is difficult to move, turn on the hazard warning lights. At night, additionally turn on the hazard warning lights, position lights, and rear lights.
15
1
Share

How many meters from a bridge is parking prohibited for vehicles?

Parking is prohibited within 50 meters. According to the 'Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China': at intersections, railway crossings, sharp curves, narrow roads less than 4 meters wide, bridges, steep slopes, tunnels, and sections within 50 meters of these locations, parking is not allowed. Additional information: 1. On road sections with no-parking signs or markings: on road sections with separation facilities between motor vehicle lanes and non-motor vehicle lanes or sidewalks, as well as crosswalks and construction zones, parking is prohibited. 2. Bus stops, emergency stations, gas stations, fire hydrants, or fire stations: in front of bus stops, emergency stations, gas stations, fire hydrants, or fire stations (stations) and within 30 meters of these locations, parking is prohibited except for the use of these facilities.
15
4
Share

Can the vehicle pass inspection after an engine replacement?

If the engine is replaced and the change is registered with the vehicle management office, the vehicle can pass inspection; if the engine is replaced without registering the change with the vehicle management office, the vehicle will not pass inspection. According to relevant regulations, if a registered motor vehicle undergoes a color change or engine replacement, the owner must apply for a change registration at the local vehicle management office; otherwise, the vehicle will not pass the annual inspection. Vehicle annual inspection refers to a mandatory test for all vehicles that have obtained official license plates and registration certificates, equivalent to an annual physical examination for the vehicle based on the safety technical conditions for motor vehicle operation. Vehicle annual inspections help promptly eliminate potential safety hazards, encourage better maintenance, and reduce the occurrence of traffic accidents.
18
4
Share

How to Distinguish Between Full Synthetic and Semi-Synthetic Engine Oil?

Methods to distinguish between full synthetic and semi-synthetic engine oil: 1. The packaging will indicate the type; 2. It can also be identified by color—semi-synthetic oil tends to be darker, while full synthetic oil is lighter. Strictly speaking, semi-synthetic oil can only be considered a mineral oil, as its production process involves adding a large amount of synthetic oil additives to a mineral oil base. While ensuring lubrication efficacy, it also performs well in functions like cleaning and repair. Full synthetic oil is artificially synthesized through chemical processes. During production, different formulations are used depending on the intended purpose. It excels in lubrication, cleaning, and repair capabilities, has a longer oil change interval, and offers better adaptability to environmental conditions.
13
4
Share

How to Activate the Headlight Cleaning System on the A4L?

A4L headlight cleaning system activation method: First, turn on the high beam of the headlights. While the high beam is on, operate the windshield wiper control lever by pulling it towards the driver's body to activate the headlight cleaning function. The headlight cleaning system refers to a water outlet located below the headlights, which can be used to clean dust and dirt from the headlights at any time. This feature is generally available in higher-end models. The Audi A4L is a mid-size car with body dimensions of 4858mm in length, 1847mm in width, and 1439mm in height, and a wheelbase of 2908mm. It is equipped with a 2.0-liter turbocharged engine.
3
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.