Is wheel alignment at a 4S store free of charge?

What to Do When the Car Turn Signal Suddenly Flashes Faster?

The solution to the sudden increase in the flashing speed of the car turn signal is: it may be due to a malfunction in the vehicle's turn signal flasher, and replacing the flasher should resolve the issue. The turn signal is an important indicator light that is activated when a motor vehicle turns to alert surrounding vehicles and pedestrians. The turn signal bulb uses a xenon tube, controlled by a microcontroller circuit, with left and right alternating flashes working continuously. The turn signal employs a flasher to achieve the blinking effect, which can be mainly categorized into three types: resistance wire type, capacitor type, and electronic type. Precautions for using turn signals include: 1. Activate the turn signal in advance when making a turn; 2. Use the left turn signal when overtaking and the right turn signal when returning to the original lane; 3. When activating the turn signal, pay attention to observing pedestrians and passing vehicles before performing any vehicle maneuvers.

14

1

Share

What is the use of the Lexus hold button?

The function of the Lexus hold button is: After using this function, it allows the car's transmission to operate the automatic transmission like a manual transmission. After pressing the button, the car enters the hold mode, and the hold mode indicator light will illuminate. Pressing the button again will turn off the indicator light, and the car will return to the normal driving mode. Taking the Lexus ES 2020 300h Excellence Edition as an example, it belongs to the mid-to-large car category, with body dimensions of: length 4975mm, width 1866mm, height 1447mm, a wheelbase of 2870mm, a fuel tank capacity of 49.3 liters, and a curb weight of 1720kg.

20

3

Share

Does the Tiguan L380 Have a Particulate Filter?

The Tiguan L380 is equipped with a particulate filter. A particulate filter is a ceramic filter installed in the diesel engine's emission system, which captures particulate emissions before they enter the atmosphere. Functions of the Particulate Filter: The particulate filter can reduce the soot produced by the diesel engine by more than 90%. The captured particulate emissions are subsequently burned off during vehicle operation. To check whether a vehicle has a particulate filter, you can use the following three methods: 1. Refer to the and to see if there is a particulate filter function. Additionally, carefully check the fault codes in the manual to see if there is a "Particulate Filter" warning light indicator. 2. Check the label on the oil filler cap. If the oil cap clearly states 0W-20 grade oil, it indicates the presence of a particulate filter. 3. Look behind the three-way catalytic converter on the exhaust pipe for a cylindrical section. If present, that is the particulate filter.

1

3

Share

Do You Need to Wait for a Red Light When Making a U-Turn?

If the U-turn signal light is red, you must wait to make a U-turn; otherwise, it will be considered running a red light. According to the "Road Traffic Safety Law," this violation incurs a penalty of 6 demerit points and a fine of 200 RMB. If there is no dedicated U-turn signal light, and the gap is marked with a dashed line, the U-turn is not affected by the traffic light and does not require crossing the pedestrian crossing. However, if the gap is marked with a solid line, the U-turn must cross the pedestrian crossing and is subject to the left-turn signal light. Making a U-turn directly without following these rules may result in being photographed or penalized by on-site traffic police. When making a U-turn that requires crossing a pedestrian crossing, yielding to pedestrians is mandatory: 1. If pedestrians are walking on the right side of the crosswalk and have not reached the centerline of the road, vehicles on the left side must slow down and allow them to pass safely. 2. If pedestrians are waiting outside the boundary of the motorized and non-motorized lanes and have not entered the roadway, vehicles should slow down and let them pass safely. 3. If pedestrians have crossed the boundary between motorized and non-motorized lanes, failing to stop for them is a violation and punishable. 4. If pedestrians enter the motorized lane (Lane A) from the crosswalk, vehicles in Lane B must slow down and allow them to pass safely. Failing to stop for pedestrians in Lane A is a violation and punishable. 5. If pedestrians are waiting at the centerline of the road but have not entered the motorized lane, failing to stop for them is a violation and punishable. 6. If pedestrians cross the centerline and enter the motorized lane, failing to stop for them is a violation and punishable. 7. If the road is divided by a median with greenery, and pedestrians are waiting in the central stopping area, vehicles must slow down and allow them to pass safely. Permissible U-turn scenarios: 1. If an intersection has a U-turn sign, a U-turn is allowed. If there is a U-turn signal light, follow its instructions. If no signal light exists, make the U-turn without obstructing other vehicles or pedestrians. 2. If there is no explicit "No U-Turn" or "No Left Turn" sign at an intersection, a U-turn is allowed. The absence of such signs, along with no solid centerline, means you can proceed with the U-turn. 3. U-turns are also permitted in yellow grid zones. These zones are no-parking areas marked at intersections prone to congestion or near important facilities. While stopping in these zones is prohibited, making a U-turn is allowed unless a median barrier is present. 4. If a U-turn signal light is present, follow its instructions—only proceed on green. 5. If a "No Left Turn" sign coexists with a "U-Turn Permitted" sign, U-turns are allowed, but left turns are not. Note that "No U-Turn" and "No Left Turn" are not the same. Key considerations when making a U-turn: 1. Observe road markings—if a solid line is present, U-turns are prohibited under any circumstances. Continue driving to find a suitable location. 2. If a "No Left Turn" sign is posted, U-turns are also prohibited at that intersection, as U-turns inherently involve a left-turn maneuver. 3. U-turns must be made from the innermost left-turn lane. If you are in the second left-turn lane, a U-turn is not permitted. 4. Always yield to oncoming traffic when making a U-turn. Failing to do so may result in bearing full liability for any accidents. 5. Near intersection stop lines, lane arrows guide vehicle positioning. Not all leftmost lanes are for left turns—some may have straight arrows. Even if no explicit "No U-Turn" signs are present, U-turns are prohibited in such lanes.

18

2

Share

How to Remove Anti-Theft License Plate Screw Caps?

The method to remove anti-theft license plate screw caps is: Use a flathead screwdriver and a hammer. Insert the screwdriver into the seam and strike the head of the screwdriver with the hammer to remove it. License plate screw caps serve an anti-theft sealing function. The screws on license plates have anti-theft measures; if you want to remove the license plate, you can only destroy the anti-theft device. The first Chinese character on a vehicle license plate represents the abbreviation of the province or municipality directly under the central government. The uppercase letter following the Chinese character indicates the city or district. License plates are hard-coded number plates issued by vehicle management authorities after reviewing, inspecting, and registering vehicles that have applied for license plates. Vehicle license plates are the legal certificates permitting cars to drive on the road.

7

2

Share

What kind of driver's license is required for a 6.2-meter car?

A 6.2-meter car requires an A1 driver's license. The main part of the driver's license records the motor vehicle driver's information, including name, gender, date of birth, nationality, address, ID number, motor vehicle driver's license number, and photo. The supplementary part of the license includes the initial issuance date, permitted vehicle type code, validity period, issuing authority seal, and file number. Requirements for obtaining an A1 driver's license: 1. Age condition: Applicants for large passenger vehicle licenses must be between 26 and 50 years old. 2. Height must be at least 155 cm, and vision must meet the requirement of at least 5.0 on the logarithmic visual acuity chart for both naked eyes or corrected vision.

11

5

Share

Is wheel alignment at a 4S store free of charge?

What to Do When the Car Turn Signal Suddenly Flashes Faster?

What is the use of the Lexus hold button?

Does the Tiguan L380 Have a Particulate Filter?

Do You Need to Wait for a Red Light When Making a U-Turn?

How to Remove Anti-Theft License Plate Screw Caps?

What kind of driver's license is required for a 6.2-meter car?

Where is the key sensing area of Qoros car?

How to Use P, R, N, D, and S Gears?

What is the fuel consumption of the Civic?

Is the Engine Ticking Sound Indicative of Cylinder Scoring?