Is Waxing Once a Month Harmful to the Car?

What is the L gear? What is its function?

L is the low gear, also known as the climbing gear. Its function is to limit the low gear to increase torque and engine braking. Below are the uses of the L gear and an introduction to other gears: Uses of the L gear: When going downhill or descending a long slope, shifting to the L gear restricts the car's gear to automatically stay in the low gear. This allows the car to use engine power for braking when going downhill, preventing the driver from having to press the brakes for extended periods, which could lead to overheating of the brake pads and potential hazards. Introduction to other gears: In addition to the L gear, automatic transmission vehicles with continuously variable transmissions (CVT) typically have P, R, N, D, and S gears. Among these, P is the parking gear, R is the reverse gear, N is the neutral gear, D is the drive gear, and S is the sport gear.

14

0

Share

Will One Bar of Fuel Left in the Tank Damage the Car?

Having one bar of fuel left in the tank will not damage the car. When there is only one bar of fuel remaining, the fuel gauge light turns yellow to remind the owner to refuel. The function of the fuel gauge: The fuel gauge is a tool used to determine the fuel capacity status of a car. Depending on the model, fuel gauges are generally divided into analog (pointer) and digital types. The fuel gauge primarily measures the fuel level in the car's tank using a float, and then determines the fuel capacity by changing the current passing through the fuel gauge via a variable resistor at the end of the float. Precautions for refueling: You should refuel when the fuel gauge pointer reaches the red line. Avoid waiting until the gasoline is completely depleted before refueling, as this can damage the car's engine.

16

0

Share

What does the Volkswagen EPC mean?

When the EPC light on the car's dashboard is illuminated, it indicates a fault in the vehicle's electronic stability system. If the EPC light stays on or flashes after the vehicle starts or during driving, it signifies a malfunction, and you should immediately contact a repair shop to diagnose and read the specific fault code. EPC stands for the vehicle's electronic stability system. A constantly illuminated indicator light means there is a fault in the engine or electronic systems. If the light remains on or flashes after ignition or during driving, it indicates that the management system has detected a fault in the engine or electronic systems. Common causes of the EPC light staying on include faults in the engine intake system, throttle valve, fuel system, engine, ECU control unit, or brake lights. Solutions for when the car's EPC light comes on: Engine intake system fault: The EPC light will alert if the engine intake is obstructed or insufficient. Throttle valve fault: Carbon buildup is a common issue with the throttle valve, and dirt can also affect intake, triggering the light. Fuel system fault: Issues such as substandard fuel, degraded fuel, or poor fuel atomization can cause the light to illuminate. Engine fault: Insufficient engine pressure or problems with the intake valve or other power system components can also trigger the EPC light. ECU control unit fault: For example, interference with the car computer's signals or false alarms from the car computer. Brake light fault: If the brake lights fail, the brake switch malfunctions, or there is an issue with the brake wiring. Troubleshooting steps include checking the intake system, using the correct fuel grade, cleaning the throttle valve, removing carbon deposits, and reprogramming the ECU data. If the EPC light comes on, the owner can first try turning off the engine and restarting it to see if the light remains on. If it does not, the issue may have been temporary. If the light stays on or frequently illuminates, the vehicle should be taken to the nearest repair facility for professional diagnosis and timely resolution of potential safety hazards. The full English name of EPC is Electronic-Power-Control, which translates to electronic power control. Most people refer to it as the engine electronic stability system. The EPC system primarily includes controllers and sensors related to the powertrain. When sensor data is abnormal, the EPC system takes predefined actions to manage the powertrain. Common EPC indicator lights typically display two colors: yellow and red. A yellow EPC fault light means the car can still be driven, but you should proceed slowly to a repair point. A red EPC fault light indicates a serious issue, and you should pull over immediately and contact a repair technician. Continuing to drive could damage core components or compromise safety.

19

5

Share

What types of insurance are generally purchased for private cars?

Private cars generally need to purchase compulsory traffic insurance, vehicle damage insurance, and third-party liability insurance. Compulsory traffic insurance must be purchased: The full name of compulsory traffic insurance is "Compulsory Traffic Accident Liability Insurance for Motor Vehicles." It is a mandatory liability insurance provided by insurance companies to compensate for personal injuries, deaths, and property losses (excluding the vehicle's occupants and the insured) caused by road traffic accidents involving the insured vehicle, within the liability limits. Vehicle damage insurance is a basic commercial insurance: Vehicle damage insurance is a type of automobile commercial insurance. It stipulates that if the insured or an authorized driver causes an insured accident while driving the insured vehicle, resulting in damage to the insured vehicle, the insurance company shall compensate within reasonable limits. Introduction to third-party liability insurance: This refers to the economic liability that the insured must bear by law when an accident occurs during the use of the insured vehicle by the insured or an authorized driver, causing bodily injury, death, or direct property damage to a third party. The insurance company is responsible for compensation. In most regions, third-party liability insurance is listed as a compulsory insurance type. Without this insurance, motor vehicles cannot be registered or undergo annual inspections.

19

0

Share

Is a tire pressure of 195 kPa normal?

A tire pressure of 195 kPa is not normal. Driving with a tire pressure of 195 kPa is not advisable. The normal range for tire pressure is 230 to 250 kPa. When driving with insufficient tire pressure, the most noticeable effect is increased fuel consumption. Low tire pressure increases the contact area between the tire and the road, leading to greater friction and added driving resistance, which in turn increases fuel consumption. Additionally, insufficient tire pressure accelerates tire wear and reduces the tire's lifespan. The relationship between tire pressure and vehicle handling stability: Cornering stiffness is a crucial parameter that determines a vehicle's handling stability. Tires should have high cornering stiffness to ensure good handling stability. Tire pressure significantly affects cornering stiffness—the higher the tire pressure, the greater the cornering stiffness. However, beyond a certain point, increasing the pressure does not further change the stiffness. Introduction to standard tire pressure: According to the international standard GBT2978-2008, the recommended tire pressures are as follows: Standard tires: 2.4-2.5 bar; Reinforced tires: 2.8-2.9 bar; Maximum pressure: should not exceed 3.5 bar.

18

3

Share

What is the size of a vehicle license?

The vehicle license measures 88mm in length, 60mm in width, with a rounded corner radius of 3mm. It consists of three parts: the license holder, the main page, and the supplementary page. The front side of the main page contains the endorsed certificate core, while the back side features a photo of the vehicle, sealed with a plastic cover. The supplementary page is the endorsed certificate core. The text on the front side of the main page is in black, with "People's Republic of China Motor Vehicle License" in 12pt bold font. Standard dimensions for vehicle license photos: The specifications for the external color photo of the vehicle are: length 88mm, width 60mm, with a rounded corner radius of 3mm. When taking photos of cars, they should be shot from a 45° angle on the left front side. For motorcycles and trailers, photos should be taken from a 45° angle on the left rear side. Vehicle photos should be taken without the license plate displayed, except for registered vehicles that require a reissued license, in which case the license plate can be shown. The vehicle image should occupy two-thirds of the photo, and the photo must clearly show the vehicle's color and exterior features. Documents required for obtaining a vehicle license: Identity proof of the vehicle owner; proof of vehicle origin such as purchase invoice; Vehicle manufacturing qualification certificate or import certificate for imported vehicles; vehicle purchase tax payment or tax exemption certificate; Motor vehicle compulsory traffic accident liability insurance certificate.

14

1

Share

Is Waxing Once a Month Harmful to the Car?

What is the L gear? What is its function?

Will One Bar of Fuel Left in the Tank Damage the Car?

What does the Volkswagen EPC mean?

What types of insurance are generally purchased for private cars?

Is a tire pressure of 195 kPa normal?

What is the size of a vehicle license?

How Does a Car Differential Work?

What is the usage method of a cylinder pressure gauge

What Do the Driving Mode Letters Stand For?

Does a Deformed Bumper Beam Need Replacement?