Is Warrior Tire a Subsidiary of Michelin?

How to Open the Envision Key?

To open the Envision key, follow these steps: 1. Release the lock button at the rear end of the remote key and pull out the mechanical key. 2. Insert a flat-head screwdriver into the gap at the corner and twist to separate the upper and lower parts, thus opening the key. Precautions for using the remote key are as follows: 1. Passengers, especially children, can easily open the door and fall out of the vehicle while it is moving. When the doors are locked, they cannot be opened using the door handle. 2. If the vehicle is unlocked, children inside may not be able to exit on their own. They could suffer from heat exhaustion, permanent injury due to heatstroke, or even death. 3. When slowing down or stopping, people outside the vehicle can easily enter through unlocked doors. Locking the doors helps prevent such incidents.

18

4

Share

How to Check the Oil Dipstick on a BMW X1?

BMW X1 oil dipstick inspection method is as follows: 1. Make sure the vehicle is cooled down. After pulling out the dipstick for the first time, wipe it clean with a clean tissue, then reinsert it. 2. Upon pulling out the oil dipstick for the second time, check the oil level on the dipstick. If the oil level is between the upper and lower limits, it indicates the oil quantity is normal. Relevant information is as follows: 1. The oil dipstick is usually located near the engine and has a distinct feature—a pull ring. You can pull it out by firmly tugging the ring upwards. 2. The total amount of engine oil is approximately four liters. The capacity between the upper and lower limits on the dipstick is roughly one liter. Even if the oil level reaches the lower limit on the dipstick, there are still at least three liters of oil remaining in the engine.

12

1

Share

What is the minimum ground clearance of the Yaris L and Vios?

The minimum ground clearance of the Yaris L is 100mm, while the Vios has a minimum ground clearance of 160mm. The minimum ground clearance of the Yaris L and Vios refers to the distance between the lowest point (excluding wheels) and the supporting surface, which indicates the vehicle's ability to pass over obstacles like rocks or tree stumps without collision. Generally, higher ground clearance improves off-road capability, but excessively high clearance may reduce stability at high speeds. The Yaris L is a subcompact car produced by GAC Toyota. Its dimensions are 4440mm in length, 1700mm in width, 1490mm in height, with a wheelbase of 2550mm. The Vios is a subcompact car manufactured by FAW Toyota. Its dimensions measure 4435mm in length, 1700mm in width, 1490mm in height, with the same 2550mm wheelbase. Typically, sedans have ground clearance ranging from 110mm to 150mm, while SUVs feature 200mm to 250mm clearance. However, the ground clearance of the Yaris L and Vios isn't static - it varies depending on load conditions, so changes in vehicle load should be considered when evaluating clearance. When selecting a vehicle, ground clearance can serve as one reference factor. The choice should align with intended usage and road conditions: for well-paved urban roads, lower clearance enhances stability and comfort; for frequent travel on poor road surfaces or off-road conditions, higher clearance is preferable to prevent undercarriage scraping or damage.

4

5

Share

What is the Function of the Coupler and Draft Gear?

The coupler and draft gear is one of the most fundamental and critical components of a vehicle. It is used to connect vehicles with each other, locomotives, or multiple units, transmitting traction force, braking force, and mitigating longitudinal impact forces. Composition of the Coupler and Draft Gear: It consists of a coupler, draft gear, coupler yoke, follower plate, and other components integrated into a single unit, installed within the draft sill at the end of the vehicle's underframe. This ensures safe and reliable vehicle coupling and interchangeability of the coupler and draft gear installation. Function of the Coupler: The coupler refers to the hook at either end of a railcar or locomotive, serving the purposes of connection, traction, and buffering. It is used to link locomotives with vehicles or vehicles with each other, transmitting traction and impact forces while maintaining a certain distance between vehicles. Function and Classification of the Draft Gear: Function: The draft gear is used to mitigate longitudinal impacts and vibrations caused by changes in locomotive traction force during operation or during starting, braking, and shunting operations when vehicles collide with each other. It dissipates the impact and vibrations between vehicles, thereby reducing damage to the vehicle structure and cargo. Classification: Based on structural characteristics and working principles, draft gears can generally be categorized into friction-type draft gears, rubber-type draft gears, and hydraulic draft gears.

10

3

Share

What is the wheelbase of the Trumpchi GS5 Super?

The Trumpchi GS5 Super is a compact SUV with a wheelbase of 2710 mm. Its length, width, and height are 4750 mm, 1854 mm, and 1690 mm respectively. The GS5 Super is equipped with two engine options: a 1.8-liter turbocharged engine and a 2.0-liter naturally aspirated engine. More details are as follows: 1. The 1.8-liter turbocharged engine, coded 4B18M1, delivers a maximum power of 130 kW and a peak torque of 242 Nm. This engine reaches its maximum power at 5250 rpm and its peak torque between 1700 and 5250 rpm. It is paired with either a 5AT transmission or a 7-speed dual-clutch transmission. 2. The 2.0-liter naturally aspirated engine produces a maximum power of 108 kW and a peak torque of 187 Nm. It achieves maximum power at 6300 rpm and peak torque at 4500 rpm. This engine is matched with either a 5-speed manual transmission or a 5AT transmission.

16

2

Share

What Are the Common Car Tire Specifications?

There are three common car tire specifications: 185/65R14, 185/65R15, and 205/55R16. Taking 185/65R14 as an example, 185 represents the section width, which is the area of the tire that can contact the ground, measured in millimeters; 65 is the aspect ratio, the ratio of the tire's section height to its section width; R stands for radial tire; and 14 is the inner diameter of the tire, which is the diameter of the wheel hub. Tires also have speed rating letters, indicating the maximum speed at which the tire can carry a specified load under defined conditions. Letters from A to Z represent certified speed ratings ranging from 4.8 kilometers per hour to 300 kilometers per hour.

8

0

Share

Is Warrior Tire a Subsidiary of Michelin?

How to Open the Envision Key?

How to Check the Oil Dipstick on a BMW X1?

What is the minimum ground clearance of the Yaris L and Vios?

What is the Function of the Coupler and Draft Gear?

What is the wheelbase of the Trumpchi GS5 Super?

What Are the Common Car Tire Specifications?

Where is the diagnostic connector located on the Peugeot 5008?

What are the matching tires for the Geely Boyue?

What is the normal tire pressure for the Buick Verano?

Is an Off-Road Vehicle an SUV?