Is Volvo the Only Brand with Emergency Avoidance Function?

1 Answers
XavierAnn
07/30/25 4:28am
Only Volvo has the emergency avoidance function, which is a world-first feature pioneered by Volvo. Introduction to the Emergency Avoidance Function: The emergency avoidance assistance system in cars is essentially the brake assist system. The brake assist system includes electronic brake assist and brake force assist systems. By assessing the driver's braking action, it increases braking force during emergency stops, thereby reducing the vehicle's braking distance. Function of the Brake Assist System: During vehicle operation, the brake assist system continuously monitors the brake pedal. Under normal braking conditions, the system does not intervene, allowing the driver to determine the braking force. However, when it detects that the driver suddenly presses the brake pedal with extreme speed and force, it interprets this as an emergency braking situation. The system then increases pressure on the braking system to generate maximum braking force, enabling the vehicle and its occupants to quickly escape from dangerous situations.
Was this review help?
17
0
Share
More Forum Discussions

What is the minimum ground clearance of the Equinox?

The minimum ground clearance of the Equinox is 199mm, and it reduces to 170mm when fully loaded. The minimum ground clearance refers to the distance between the lowest point of the chassis and the ground when the vehicle is carrying its maximum allowed load. This measurement reflects the vehicle's ability to pass over obstacles or uneven terrain without collision. The Equinox has a body length of 4646mm, width of 1843mm, and height of 1684mm, with a wheelbase of 2725mm. It is equipped with a 1.5T turbocharged engine paired with a 6-speed automatic transmission. This engine delivers a maximum power of 124kW and a maximum torque of 250Nm.
7
3
Share

What are the reasons for ineffective brakes?

Reasons for ineffective brakes: 1. Excessive free travel of the brake pedal; 2. Insufficient or no oil in the brake master cylinder reservoir; 3. Air entering the brake lines or vaporization of brake fluid causing air resistance; 4. Aging or wear of the master cylinder and wheel cylinder cups leading to poor sealing; 5. Loose or detached vacuum pipe connections of the vacuum booster or power booster; 6. Diaphragm rupture or poor sealing of the sealing ring. In vehicles, braking mainly refers to pressing the brake pedal, which relies on the friction between the brake pads and brake discs to generate resistance, thereby slowing down or stopping the vehicle. Whether it's a manual transmission or an automatic transmission model, the brake pedal of a car is controlled by the right foot.
17
5
Share

What are the causes of abnormal tire pressure?

Tire pressure abnormalities can be caused by: 1. Air leakage in the tire; 2. Tire pressure being too low or too high. The hazards of abnormal tire pressure include: 1. Accelerated wear, affecting tire lifespan; 2. Increased risk of tire blowouts; 3. Excessive vehicle vibration, leading to loss of shock absorption capability. Strictly speaking, tire pressure refers to the air pressure inside the tire, and the level of tire pressure plays a crucial role in a car's performance and power. Generally, a tire pressure value between 2.3 and 2.5 is considered normal. If the car is fully loaded, adjusting the tire pressure to around 2.5 is more suitable; for two passengers, a tire pressure value of 2.3 is also normal.
5
1
Share

What Causes an Automatic Transmission Car to Stall?

Reasons for an automatic transmission car stalling: The engine fuel supply line is blocked, causing abnormal fuel delivery that interrupts the engine stroke. Alternatively, severe carbon buildup or erosion of the spark plugs in the cylinders leads to unstable sparks, making the engine difficult to start and causing abnormal stalling during throttle changes. Correct method for starting an automatic transmission car: 1. Turn on the power, then start the car; 2. After ignition, press the brake, shift to D gear, release the handbrake, and gently press the accelerator to start; 3. After starting, accelerate appropriately based on road conditions. Precautions for driving an automatic transmission car: 1. Use one foot to control the car; 2. Use the gear appropriately when waiting at traffic lights.
18
5
Share

Which factory produces Aosen tires?

Aosen tires are produced by Qingdao Doublestar Tire Factory. Here are some tire maintenance tips: 1. Regularly check tire pressure: Tire pressure is a crucial factor affecting tire lifespan. It should neither be too high nor too low; always inflate according to the vehicle's recommended pressure. In summer, try to keep the pressure slightly lower. In winter, ensure the tire pressure is slightly higher than in summer due to thermal expansion and contraction. 2. Inspect wear patterns: Some vehicles may experience uneven tire wear. Frequently check the inner side of the tires for abnormal wear, focusing on whether the tread depth is consistent on both sides. 3. Perform wheel alignment periodically: If the vehicle pulls to one side or exhibits abnormal steering, get a wheel alignment promptly to prevent further issues. Wheel alignment ensures even force distribution across all four tires, preventing excessive wear.
19
4
Share

What are the general components of a car?

Cars are generally composed of four basic parts: the engine, chassis, body, and electrical equipment. The engine is the power unit of a car, functioning to burn the supplied fuel and generate power. Most cars use reciprocating piston internal combustion engines, which consist of the engine block, crankshaft and connecting rod mechanism, valve train, fuel supply system, cooling system, lubrication system, ignition system, and starting system. The chassis is made up of the transmission system, running gear, steering system, and braking system. The body is mounted on the frame of the chassis and is used to accommodate the driver, passengers, or cargo. The electrical equipment consists of two main parts: the power supply and the electrical devices. The power supply includes the battery and generator, while the electrical devices encompass the engine starting system, ignition system for gasoline engines, and other electrical appliances.
1
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.