Is Vehicle Scrapping Mandatory for License Plate Cancellation?

2 Answers
SanGrant
07/24/25 5:01am
No, transferring ownership of a vehicle does not require scrapping to cancel the license plate. The differences between cancellation and scrapping of a motor vehicle are as follows: 1. "Vehicle Cancellation": Pertains to the vehicle's registration information, equivalent to canceling the vehicle's household registration information. It mainly refers to when a motor vehicle meets the national mandatory scrapping standards, is lost, is no longer used within the country, or is returned due to quality issues, the owner should apply for cancellation of registration. 2. "Vehicle Scrapping": Pertains to the vehicle's operational lifespan, meaning when the vehicle reaches the prescribed service life, the vehicle itself is scrapped. However, if the owner does not cancel the registration, the vehicle's information still exists.
Was this review help?
18
3
Share
LilaLee
08/11/25 12:39am
Canceling the license plate doesn't necessarily mean scrapping the car, buddy. Take my last experience for example - after driving the car for a long time and wanting to replace it, I just went to the DMV to complete the cancellation procedure, but the car is still parked idle at home. Cancellation just means deregistering the vehicle so it can't be legally driven on roads, but you can keep the car itself as backup or for spare parts. Scrapping is a different matter - you need to specially process it at a recycling station, which costs a lot and wastes time. If the car condition is still decent, I usually suggest transferring it to used car dealers or acquaintances first, to avoid wasting money. After cancellation, there are special circumstances - like if you want to sell it to another region, you can apply for transfer registration. Don't rush to scrap it just because you hear about cancellation, consider other options to avoid resource waste.
Was this review help?
19
3
Share
Expand All
More Forum Discussions

Is ETC Safe?

ETC is safe. It uses a dedicated ETC card that can only communicate with authorized devices, such as ETC equipment at highway entrances and exits. Handheld devices cannot conduct transactions, and the possibility of someone stealing money by moving an ETC device is extremely low and can be practically ignored. Benefits of installing ETC: Saves time by eliminating the hassle of waiting in queues. Environmentally friendly, as vehicles pass through toll stations without stopping, reducing noise and exhaust emissions, thereby minimizing pollution. Reduces wear and saves costs by decreasing the frequency of vehicle starts and brakes, lowering wear and fuel consumption. Users also enjoy a 5% discount on toll fees. Improves efficiency, as ETC lanes can theoretically increase vehicle throughput by 2-3 times, making traditional ETC systems faster, more advanced, and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous. How ETC works: It uses an onboard electronic tag installed on the vehicle's windshield to communicate via dedicated short-range communication with microwave antennas in ETC lanes at toll stations. This data is then processed through computer networking technology for backend settlement with banks, allowing vehicles to pass through highway or bridge toll stations without stopping while still paying the required fees.
20
4
Share

How to Determine if the Car Body is Straight?

Methods to determine if the car body is straight include observing the lines on both sides of the road and finding reference points. Here is a detailed analysis: 1. Observe the lines on both sides of the road: While driving, you can check the lines on both sides of the road through the rearview mirror. If the front and rear of the car body are not parallel to the roadside lines, then the car body is tilted to some extent. If they are parallel, there is no issue. When parking, you can judge based on the lines on both sides of the parking space. If the car body is parallel to the parking lines, it is straight; otherwise, adjustments are needed. 2. Find reference points: First, the driver should look straight ahead and pay attention to both sides while driving in a straight line. It is essential to select good reference points, maintain straight-line driving, correct the direction promptly, and always be aware of various traffic conditions ahead to detect and handle them in time. The driver should look far and near while holding the steering wheel straight and adjust the viewing distance according to the speed. At higher speeds, look farther ahead; at lower speeds, look slightly closer, and use peripheral vision to monitor the surroundings of the vehicle.
15
0
Share

What to Do When the Built-in Tire Pressure Monitoring Sensor Runs Out of Power?

If the built-in tire pressure monitoring sensor runs out of power, it is generally recommended to directly replace the sensor module with a new one. Tire pressure monitoring is designed to automatically and continuously monitor the air pressure in the tires while the vehicle is in motion, alerting the driver to any leaks or low pressure to ensure driving safety. There are three common types of tire pressure monitoring systems: Direct Tire Pressure Monitoring: The direct tire pressure monitoring system uses pressure sensors installed in each tire to directly measure the tire pressure. The pressure information is then transmitted wirelessly from inside the tire to a central receiver module, which displays the pressure data for each tire. The system automatically alerts the driver if the tire pressure is too low or if there is a leak. Indirect Tire Pressure Monitoring: When the pressure in a tire decreases, the vehicle's weight causes the rolling radius of that tire to become smaller, resulting in a faster rotation speed compared to the other tires. By comparing the differences in rotation speeds among the tires, the system monitors the tire pressure. Indirect tire pressure monitoring systems essentially rely on calculating the rolling radius of the tires to monitor pressure. Tire Pressure Monitoring System (TPMS) Overview: This system combines the advantages of both the direct and indirect systems. It is equipped with direct sensors in two diagonally opposite tires and includes a 4-wheel indirect system. Compared to a full direct system, this hybrid system can reduce costs and overcome the limitation of indirect systems, which cannot detect low pressure in multiple tires simultaneously. However, it still cannot provide real-time pressure data for all four tires as effectively as a full direct system.
6
1
Share

What are the differences between the Mercedes-Benz G350 and G500?

The differences between the Mercedes-Benz G500 and G350 are as follows: Different wheel sizes: The G350 has 18-inch wheels, while the G500 has 19-inch wheels. This means the G350's wheels are one size smaller than the G500's. Different exterior: The G350 lacks sport components, whereas the G500 comes standard with sport components. Different suspension types: The G350 features a multi-link independent front suspension, while the G500 has a double-wishbone independent front suspension. Both models share the same rear suspension (solid axle non-independent suspension). Different configurations: The G500 lacks rear airbags, a multi-disc DVD player, and ambient interior lighting compared to the G350. The G500 surpasses the G350 in the following aspects: Seats: multi-contour front seats; seat ventilation; seat leg support adjustment; configurations: fatigue reminder; collision warning/active braking; lane assist; lane keeping; adaptive cruise control. The G350's steering wheel is no longer the flat-bottom AMG steering wheel found in the G500 but reverts to the previous standard style. The manual air conditioning in the rear of the G350 has been upgraded to automatic air conditioning. Different audio brands: The G350's audio system is by Harman Kardon, while the G500's is by Burmester. Different engines: The G500 is equipped with an 8-cylinder engine, model 176980 twin-turbocharged engine; the G350 is equipped with a diesel 4-cylinder engine, model 264920 turbocharged engine. Different top speeds: The G350 has a top speed of 190 km/h, with an official 0-100 km/h acceleration time of 8.1 seconds. The G500 has a top speed of 210 km/h, with an official 0-100 km/h acceleration time of 5.9 seconds. Different fuel consumption: The G350 is a diesel version, while the G500 is a gasoline version. As a diesel variant of the large G, the G350's advantages include fuel consumption being only half that of the G500, lower fuel quality requirements, higher torque, stronger instantaneous burst power, and better climbing and off-road capabilities compared to the gasoline version. Different displacements: The G500 has a 4.0L displacement, while the G350 has a 2.0L displacement. Different power and torque: The G500 has higher power and torque than the G350. The G500's maximum power is 310 kW, with a maximum torque of 610 Nm, while the G350's maximum power is 190 kW, with a maximum torque of 370 Nm. Both models use a 9-speed automatic transmission. Different cold resistance: The Mercedes-Benz G350 is slightly noisier than the G500 and has inferior cold resistance compared to the G500.
12
3
Share

What Causes Engine Shaking During Vehicle Start-Up?

Vehicle start-up engine shaking is caused by insufficient engine power, loose connections between the transmission and chassis, or uneven engagement between the clutch pressure plate and clutch friction disc. If not addressed promptly, it may lead to increased engine carbon deposits, damage to the vehicle's spark plugs, and accelerated aging of engine components. Solutions for engine shaking during vehicle start-up include: 1. Adjust or replace the driven plate; 2. Reattach the clutch lining; 3. Replace the damping spring; 4. Replace any damaged components in the clutch three-piece set (flywheel, clutch disc, pressure plate).
2
0
Share

What damage does cold start fluid cause to the engine?

Cold start fluid does not damage the engine, but long-term use of start fluid can lead to increased engine wear. This is because most start fluids are primarily composed of flammable and volatile alkanes, which can cause rough engine operation, accelerated wear, and further deterioration of engine performance. When the engine is difficult to start, the cause should be promptly identified and resolved to extend the engine's service life. Before each use of start fluid, it is advisable to preheat the engine appropriately with hot water or other methods to raise the starting temperature. Avoid directly spraying cold start fluid, as this may start the engine but can easily lead to poor lubrication, exacerbating component wear.
1
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.