Is Vehicle Inspection and Pickup Not on the Same Day?

1 Answers
DiDonovan
07/29/25 2:07pm
Generally, the vehicle inspection and pickup should be completed on the same day. When purchasing a new car, pay attention to checking the following aspects: Exterior: When picking up the new car, inspect the car's exterior under sufficient lighting to check for color differences in the paint and any scratches or dents. Interior: Check the car seats for wrinkles, any unusual odors inside the car, and dirt in the corners to avoid picking up a flood-damaged vehicle. Glass: Inspect the production dates of the car windows. Generally, the production dates of car windows may vary, but they should not exceed one year.
Was this review help?
11
1
Share
More Forum Discussions

What causes the engine warning light to illuminate in a Peugeot 408?

The main reasons for the engine warning light to illuminate include sensor issues, car maintenance problems, fuel quality issues, poor combustion of the air-fuel mixture, engine intake problems, turbocharging issues, exhaust system problems, and anti-theft system malfunctions. Additionally, when starting the car, the vehicle performs a self-check on the engine system. Normally, the engine warning light will turn off after the self-check is completed. If it remains on for an extended period, it is advisable to seek professional help at a service station to diagnose and eliminate potential safety hazards. Below is a detailed explanation of each potential issue: Sensor Issues: Sensors include those for coolant temperature, crankshaft position, air flow, intake temperature, and oxygen sensors. When these sensors are damaged, have poor connections, or experience signal interruptions, the car's ECU cannot accurately obtain engine data, leading to the illumination of the engine warning light. In such cases, it is important to visit a repair center promptly for professional diagnosis and resolution. Maintenance Issues: Poor engine maintenance is the most common cause of the engine warning light turning on. Vehicles have specific maintenance schedules, and failure to adhere to these schedules, combined with poor driving habits, can increase the burden on the engine. Eventually, the engine warning light will illuminate to alert the owner of a potential issue. Fuel Quality Issues: This refers to both fuel and engine oil. The fuel used in cars typically has a specific octane rating, and engine oil can be semi-synthetic or fully synthetic. Manufacturers usually recommend specific fuel grades and oil types. If the owner fails to use the recommended products, prolonged use can lead to engine wear, triggering the warning light. It is essential to use the correct fuel grade and engine oil as specified for the vehicle. Poor Combustion of the Air-Fuel Mixture: Issues such as faulty spark plugs, ignition coils, fuel pumps, or clogged fuel lines can lead to poor combustion of the air-fuel mixture. This can result in engine carbon buildup or knocking, which the oxygen sensor detects and reports to the ECU, causing the warning light to illuminate as a warning. Intake Issues: The engine requires air for combustion, and the air filter plays a critical role in this process. If the air filter is dirty or not cleaned regularly, it can affect the engine's air intake, potentially leading to blockages over time. Severe cases can cause the engine warning light to turn on. Turbocharging Issues: Problems with the intake boost system or turbocharger can also trigger the engine warning light. The most common issue is a damaged turbocharger, which may also cause symptoms such as oil leaks, excessive oil consumption, reduced power, metallic noises, or blue/black smoke from the exhaust. Exhaust Issues: Components such as the rear oxygen sensor, catalytic converter, exhaust camshaft, and bearings can cause the engine warning light to illuminate. The most common issue is a faulty catalytic converter, which can result from using leaded gasoline, lead or silicon-based oil additives, physical damage to the catalytic converter, or fuel system malfunctions. Anti-Theft System: If the car's electronic anti-theft system malfunctions or if the anti-theft controller is incompatible with the engine's electronic controller, the anti-theft system can prevent the engine from operating normally, causing the warning light to illuminate. Solutions for the Engine Warning Light: If the engine warning light is on and the car cannot start, this may be due to a faulty fuel pump or ignition components. In such cases, it is recommended to call for assistance immediately. If the engine warning light is on and the car is drivable but exhibits severe shaking or loss of power, pull over safely and call for roadside assistance. If the engine warning light is on but the car drives normally, this may indicate a minor sensor issue. While it is possible to continue driving, it is advisable to drive at low to moderate speeds and visit a repair shop as soon as possible to address the issue.
14
3
Share

What Causes a Car Horn to Suddenly Stop Working?

Reasons why a car horn suddenly stops working: 1. Contact point erosion. This occurs when prolonged use of the horn causes the contacts to erode, creating impedance. Drivers should be mindful of this issue when pressing the horn. 2. Poor sealing leading to moisture ingress. If drivers neglect to check the interior environment and the horn's sealing condition, moisture can easily penetrate the horn, causing the contacts to become damp and malfunction. Therefore, it's important to maintain a dry interior and ensure the horn is properly sealed. 3. Poor contact at the electromagnetic coil terminal. If the issue is traced to poor contact at the electromagnetic coil terminal, the only solution is to replace the horn. This type of fault is due to manufacturing defects and cannot be repaired. Reminder: When the car horn stops working, start by checking the horn switch contacts, sealing condition, and wiring harness. If no obvious issues are found, it's best to take the car to a professional repair shop for further inspection.
3
5
Share

How long does it take for traffic violations to appear in the system?

Online queries for motor vehicle violation information typically take about a week. Additional details regarding violation inquiries are as follows: 1. When a motor vehicle commits a violation that warrants penalties according to regulations, the public security network generally publishes the violation information within 7 working days. 2. For traffic violations captured by electronic surveillance, the police processing cycle typically takes approximately 3-5 working days. 3. The publication time of violation information refers to the scope within the province/municipality/autonomous region. For cross-provincial violations, the online query time may extend to over 15 working days. 4. Methods for motor vehicle violation queries: traffic branch terminal inquiry, service website inquiry, telephone inquiry, mobile inquiry, and tool inquiry.
19
3
Share

How many seconds does the Reiz take to accelerate from 0 to 100 km/h?

According to official data, the Reiz comes in two engine displacements: 2.5L and 3.0L. The 2.5L model accelerates from 0 to 100 km/h in 9 seconds, while the 3.0L model achieves it in 7.8 seconds. Factors affecting a vehicle's 0-100 km/h acceleration time are as follows: Torque: Torque, in layman's terms, represents how much force is available. The greater the torque, the more force is available to propel the vehicle, resulting in faster acceleration. For example, the BMW 320i has a maximum torque of 205 Nm and accelerates from 0 to 100 km/h in 9 seconds. The Reiz 2.5L has a torque of 236 Nm and also accelerates from 0 to 100 km/h in 9 seconds. Transmission efficiency: The transmission serves as the medium for power delivery, inevitably involving power loss. Higher transmission efficiency leads to better acceleration performance. Generally, the ranking of transmission efficiency is as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The Reiz 2.5L is equipped with a manual-automatic transmission. Power-to-weight ratio: The relationship between horsepower and vehicle weight is called the power-to-weight ratio (measured in Hp/T). A higher power-to-weight ratio results in faster acceleration. For instance, the BMW 320i has a power-to-weight ratio of 106 Hp/T and accelerates from 0 to 100 km/h in 9 seconds. The Reiz 2.5L has a power-to-weight ratio of 125 Hp/T and also accelerates from 0 to 100 km/h in 9 seconds.
7
5
Share

What is a Clutch Pedal?

The clutch pedal refers to the control device of the clutch assembly in a manual transmission vehicle. More details about the clutch pedal are as follows: 1. The clutch consists of friction plates, spring plates, pressure plates, and a power output shaft. It is located between the engine and the transmission, transmitting the torque stored on the engine flywheel to the transmission, ensuring the vehicle delivers appropriate driving force and torque to the driving wheels under different driving conditions, and falls under the category of the powertrain. 2. The direct function of the clutch: Through proper operation by the driver, it enables the engagement and disengagement of the front and rear parts of the clutch (the engine and the transmission).
11
2
Share

How to distinguish between National IV and National V vehicles?

Regarding the differences between National IV and National V standards, the following points apply: 1. Different nitrogen oxide emissions: Compared to National IV, the National V standard reduces nitrogen oxide emissions by 25% for light-duty vehicles and 43% for heavy-duty vehicles. Additionally, National V introduces standards for particulate matter particle count (PN) and non-methane hydrocarbons (NMHC). 2. Different implementation times: The National IV standard was implemented nationwide on July 1, 2010, featuring upgrades to emission after-treatment systems and fuel quality. The National V standard was implemented nationwide on January 1, 2018, aimed at reducing atmospheric pollution and preventing smog.
10
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.