Is Vehicle Annual Inspection Accepted on Saturdays and Sundays?

How to use the cruise control on the dx3?

The method to use the cruise control on the dx3: Press the ON/OFF button at the top of the cruise control lever, keep the throttle steady, and after about three seconds, push the lever downward to complete the speed setting. Cruise control automatically maintains the vehicle's speed as set by the driver without the need to press the accelerator pedal, allowing the car to travel at a fixed speed. The dx3 is a compact SUV model from Southeast Motors, featuring the brand's family-style front face design with the 'spreading wings' grille and standard dual L-shaped eagle-eye lens headlights. In terms of power, it is equipped with Mitsubishi's all-aluminum 4A91T 1.5T turbocharged engine, delivering a maximum power of 115 kW and a maximum torque of 220 Nm.

9

1

Share

How to Open the Fuel Tank Cap?

In-car switch is currently the most common way to open the car fuel tank door. Push-button opening method: The push-button opening of the fuel tank door is currently the most convenient method. The owner only needs to park the car, and the fuel attendant can directly press to open it for refueling. However, when not parked for refueling, remember to always engage the central locking system; otherwise, the fuel tank cap can be opened. Mechanical key opening method: This type of car fuel tank cap switch is relatively rare, usually found on some rugged off-road vehicles. Nowadays, general family cars do not use mechanical keys for opening because it is relatively more complicated to use.

19

5

Share

What is the lane on the far side of the highway?

Highway's outermost lane is the one closest to the roadside in a multi-lane carriageway. Definition of a ramp: A ramp is a road on the right side of a highway entrance (or exit), an essential component of an interchange, designed for vehicles entering or exiting the highway. Access to the highway requires acceleration via an acceleration lane (or deceleration via a deceleration lane when exiting). Proper arrangement and suitable alignment are necessary. Ramps must not be used in reverse. Speed requirements for entering/exiting the highway: All vehicles must accelerate to at least 60 km/h before merging into the highway lane, and must decelerate to below 60 km/h when exiting the highway section.

20

2

Share

How to Replace the Fuel Tank Cap Connecting Wire?

To replace the fuel tank cap connecting wire, you can use a small flat-head screwdriver to gently pry open the connecting ring at the end of the fuel tank cap and unscrew it clockwise. Fuel Grade: The label here indicates the minimum fuel grade, and it is clearly explained. Tire Pressure Standard Value: The standard tire pressure value for some car models can also be found on the label inside the fuel tank cap. As the only part in contact with the ground, tire pressure is directly related to driving safety. It should be noted that the value specified here is for the cold tire state. After high-speed or long-distance driving, the tire pressure will increase as the tire temperature rises. If you need to measure or inflate the tires at this time, you should appropriately increase the corresponding value.

17

0

Share

What Are the Basic Knowledge for Beginners in Motorcycles?

Beginners in motorcycles need to understand aspects such as model selection, brand choice, parameter selection, and more. Model selection: Understand your own needs. Choose the model flexibly based on usage scenarios. Brand selection: Brands are divided into domestic and imported types. Choose the appropriate brand based on budget, considering cost-effectiveness. Parameter selection: Refer to engine parameters (emission standards, cooling method, maximum power, maximum torque, etc.), body specifications (wheelbase, frame, braking type, curb weight, suspension type, tire specifications), fuel tank size, etc. Riding posture: Maintain body balance, keep the posture upright, and change body posture flexibly as needed. For example, when turning, adjust your posture with the tilt of the bike to achieve unity between rider and bike. During normal riding, sit on the bike with your spine slightly arched, hips not too far back or forward, hands lightly holding the handlebars, elbows slightly bent, chin tucked in, and eyes looking forward.

18

4

Share

What Causes a Loud Clanging Sound When Kicking the Tire Hard?

The loud clanging sound when kicking the tire hard may be due to looseness in the rubber bushings of the suspension components. Causes: When kicking the wheel, the gap causes full component collision, resulting in the sound of metal deformation. Recommended Actions: It is advised to inspect the components and perform gap adjustment, lubrication, and tightening. If the noise persists, tire replacement may be necessary. Reducing Shock Absorber Damage: Avoid aggressive driving, as it not only shortens the lifespan of shock absorbers but also significantly impacts other car components. Slow down on bumpy roads, and when driving over speed bumps or rough terrain, try to reduce speed and ideally have both wheels pass over the bump simultaneously to better protect the vehicle.

9

0

Share

Is Vehicle Annual Inspection Accepted on Saturdays and Sundays?

How to use the cruise control on the dx3?

How to Open the Fuel Tank Cap?

What is the lane on the far side of the highway?

How to Replace the Fuel Tank Cap Connecting Wire?

What Are the Basic Knowledge for Beginners in Motorcycles?

What Causes a Loud Clanging Sound When Kicking the Tire Hard?

What suspension does the Wuling Hongguang Plus use?

How to Open the Hood of a Toyota Car?

What is the matching method for Nissan Sylphy remote control?

What Causes the Reversing Camera to Sometimes Go Black?