Is Trumpchi a Joint Venture or Domestic Car?

How to Reset the Tire Pressure Warning on an Audi?

Audi's method to reset the tire pressure warning: First, turn on the ignition, then press and hold the tire pressure monitoring reset button. Release the button after hearing a "dong" sound. The tire pressure monitoring system will then store the current normal tire pressure data, automatically clear the previous data, and finally, the warning light on the dashboard will turn off, completing the tire pressure reset. Solutions for insufficient tire pressure: If no visible damage is found, simply inflate the tire to the normal pressure and reset the tire pressure system. If a puncture is found upon inspection, drive to a tire shop promptly for repair, then reinflate the tire. If the tire pressure warning reappears after inflation without any punctures, it may be due to air leakage caused by a deformed wheel rim. It is recommended to check the wheel rim and replace it if necessary. Hazards of low tire pressure: Increases friction with the road surface, leading to higher fuel consumption. Causes the steering wheel to feel heavy and may lead to drifting, posing risks to driving safety.

3

4

Share

How Often Should the Spark Plugs on a BMW 5 Series Be Replaced?

BMW 5 Series spark plug replacement interval: Under normal maintenance conditions, replacement is recommended after driving 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine type, so it is advisable to follow the instructions in the user manual. You can refer to the following standards for maintenance and replacement: Platinum spark plugs should be replaced at 40,000 kilometers, ordinary nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers. How spark plugs work: The ground electrode of the spark plug is connected to the metal shell, which is attached to the engine block via the threads on the cylinder head. The insulator primarily serves to isolate the metal shell from the central electrode. The terminal nut is the part of the spark plug that contacts the high-voltage coil. When current passes through the terminal nut and the central electrode, it ionizes the medium between the central electrode and the ground electrode, generating a spark to ignite the air-fuel mixture in the cylinder.

16

3

Share

Where is the trunk opening button on the Jetta?

Jetta trunk switch is located on the driver's side door panel, with a button marked with the trunk symbol being the trunk switch. The following is a related introduction about the Jetta trunk: 1. The Jetta trunk has an electric switch, which can be opened via the button on the driver's side door panel. When the car is turned off, a single press will open it, while when the car is just started, you need to hold the button for 3 seconds to open it. Alternatively, you can directly use the trunk key to twist into the trunk lock to open it. The dimensions of the Volkswagen New Jetta trunk are 1000mm in width, 590mm in height, and 1040mm in depth, with a volume of 466L. 2. The trunk space is relatively large, meeting the daily storage needs of families. The driver can open the trunk for others via the door panel button without getting out of the car. There is a light inside the trunk, making it convenient for the owner to take or place luggage at night. The car tools have designated placement areas, preventing noise caused by shaking. However, the lining material is relatively hard, making it less prone to deformation even when heavy objects are placed on it.

13

5

Share

Is it necessary to upgrade from 17-inch to 18-inch wheels?

Modifying vehicle wheels to a larger size can affect the stability of the vehicle, so it is not necessary to upgrade from 17-inch to 18-inch wheels. Moreover, altering the wheel size of a vehicle is illegal. After modifying the wheels, it is mandatory to change to tires of the same type; otherwise, the vehicle will not be able to complete registration within the stipulated time. Points to note when changing wheels: You need to complete the registration procedures. Modifying the wheel size of a vehicle involves altering the vehicle's appearance data. Within ten days after the modification, you must bring the vehicle's license and registration certificate to the local vehicle management office to complete the registration procedures. Otherwise, it will be considered an illegal modification. If you switch to 18-inch wheels, it may cause the speedometer to display inaccurately because the vehicle's design and parameters have already been calibrated. Modifying the style and color of vehicle wheels is legal. Changing the style and color of the wheels will not affect the use of the original tires. You can safely modify and use them, and the vehicle can be driven on the road without any impact on the annual inspection.

9

3

Share

What are the reasons for the failure of Volkswagen door window lift?

The reasons for the failure of Volkswagen door window lift include: 1. The lift function is turned off: Most modern cars are equipped with a function to independently control the window lift of the passenger side and the two rear doors. After pressing this function switch, the window lift switch on the door cannot be used to control the window. This switch is usually located on the driver's side door panel. 2. There are foreign objects or dirt in the window guide channel: Many higher-end models are equipped with an anti-pinch function for door windows. Foreign objects in the window guide channel, aging guide channel rubber, or excessive dust accumulation can trigger the anti-pinch function, preventing the window from rising. 3. Overheating of the window lift motor: The lifting and lowering of door windows are controlled by the lift motor. Frequent operation of the window can cause the lift motor to overheat, entering an overheat protection mode. At this time, the window lift function will temporarily fail until the motor temperature drops and returns to normal. 4. Faulty control switch: In older vehicles, due to frequent use of the lift function, control switch failures are common. Initially, it may require pressing harder to get a response, and eventually, it may fail completely.

2

0

Share

Where is the hood release on a Mercedes-Benz?

Mercedes-Benz vehicles have their hood release lever located under the dashboard on the driver's side. Here is some related information: 1. Mercedes-Benz is a German automobile manufacturer, and many of its models have been locally produced in China. The domestically produced Mercedes-Benz models include the C-Class, A-Class, E-Class, GLA, GLB, GLC, EQC, and others. 2. The EQC is a pure electric SUV from Mercedes-Benz. Its dimensions are 4774 mm in length, 1890 mm in width, and 1622 mm in height, with a wheelbase of 2873 mm. The EQC is a five-door, five-seat SUV with dual motors. It comes in both low-power and high-power versions. The low-power version has a total motor output of 210 kW, while the high-power version delivers 300 kW with a total torque of 730 Nm. The EQC uses ternary lithium batteries across all models, which offer higher energy density and lighter weight. 3. The cathode of ternary lithium batteries is made from ternary materials. Some use nickel, cobalt, and manganese, while others use nickel, cobalt, and aluminum. 4. The EQC features a double-wishbone independent suspension at the front and a multi-link independent suspension at the rear.

16

5

Share

Is Trumpchi a Joint Venture or Domestic Car?

How to Reset the Tire Pressure Warning on an Audi?

How Often Should the Spark Plugs on a BMW 5 Series Be Replaced?

Where is the trunk opening button on the Jetta?

Is it necessary to upgrade from 17-inch to 18-inch wheels?

What are the reasons for the failure of Volkswagen door window lift?

Where is the hood release on a Mercedes-Benz?

What is the actual fuel consumption of the BMW 3 Series 325li?

What is Vehicle Mileage?

Which manufacturer produces Roewe?

How often should the spark plugs of Baojun 730 be replaced?