Is Transmission Oil Leakage a Common Issue with the Avancier?

1 Answers
DeBrandon
07/30/25 2:06am
Avancier transmission oil leakage is not a common phenomenon. The causes of transmission oil leakage in vehicles include aging seals or damage to pipelines, which result in transmission oil leaking from the damaged areas during circulation. Solutions for transmission oil leakage include replacing aged or deformed oil seals; checking the installation direction of the oil seals; replacing or repairing the shaft neck; appropriately adjusting the vehicle speed to ensure the transmission operates within the allowable power range; and conducting regular maintenance on the transmission. The transmission oil used in vehicles is a type of fluid that helps keep the transmission system clean and primarily serves to protect the transmission. The replacement cycle for transmission oil in vehicles is approximately 60,000 to 80,000 kilometers or every 2 to 3 years, though the specific replacement interval should also be determined based on the actual usage conditions of the vehicle. The Avancier is equipped with a 9AT transmission and a CVT transmission. The transmission, also known as a gearbox, is an automotive component used to alter the speed and torque from the engine and to fix or change the transmission ratio between the output and input shafts in steps.
Was this review help?
7
3
Share
More Forum Discussions

How to Reset the Audi Tire Pressure Light?

Audi tire pressure light can be reset by following these steps: 1. Start the vehicle; 2. Turn on the vehicle's display screen; 3. Select 'Tire' in the vehicle settings; 4. Choose the 'Set' button on the next interface; 5. Confirm the selection to reset. Taking the 2020 Audi A6L as an example, it belongs to the mid-to-large-size car category with body dimensions of 5038mm in length, 1886mm in width, and 1475mm in height, a wheelbase of 3024mm, and a fuel tank capacity of 73 liters. The 2020 Audi A6L features a five-link independent suspension in both front and rear, and is equipped with a 2.0L turbocharged engine delivering a maximum horsepower of 190PS, a maximum power of 140kW, and a maximum torque of 320Nm, paired with a 7-speed dual-clutch transmission.
17
4
Share

What Causes an Automatic Transmission Car to Suddenly Stall While Driving?

Automatic transmission cars suddenly stalling while driving is caused by poor engine performance. Here are specific details about poor engine performance: 1. Response: In case of encountering this situation, the owner should first stay calm and quickly observe the surrounding traffic conditions. If the traffic conditions and circumstances permit, one can attempt to restart the engine without stopping the car. Since automatic transmission cars are equipped with a neutral safety switch, the vehicle can only be started in P (Park) or N (Neutral) gear. At this point, the vehicle is still coasting by inertia, so it is crucial not to shift the gear lever directly into P gear, but one can first shift into N gear. 2. Risk: Restarting an automatic transmission vehicle after stalling mid-drive carries certain risks. It requires the owner to be quite familiar with the vehicle's operations. If excessive force is accidentally applied and the gear lever is pushed directly into R (Reverse) gear, it can cause significant damage to the transmission.
3
4
Share

How Many Kilometers Should a Car's Belt Be Replaced?

Generally, a car's belt should be replaced after traveling 60,000 to 100,000 kilometers. Here are the specific details about the timing belt: 1. Replacement based on specified mileage: The timing belt is a consumable item, and once it breaks, the camshaft will not operate according to the timing, which can very likely cause the valves to collide with the pistons, resulting in severe damage. Therefore, the timing belt must be replaced according to the mileage or time specified by the manufacturer. 2. Function of the timing belt: During the operation of a car engine, the four processes of intake, compression, explosion, and exhaust continuously occur in the cylinder, and the timing of each step must be coordinated with the movement state and position of the pistons to ensure that the intake, exhaust, and piston movements are synchronized. The timing belt, driven by the crankshaft, transmits power to the corresponding components.
10
4
Share

Can a vehicle pass inspection with different tire tread patterns?

Can a vehicle pass inspection with different tire tread patterns? Yes, but the left and right tires must have the same tread pattern. Here are specific methods for tire maintenance: 1. Regularly check tire pressure: Tire pressure is a crucial factor affecting tire lifespan. It should not be too high or too low; inflate according to the vehicle's indicated pressure. In summer, try to keep the pressure slightly lower; in winter, ensure tires have slightly more air than in summer due to thermal expansion and contraction. 2. Inspect wear conditions: Some vehicles may experience uneven tire wear, so frequently check the inner side of tires for abnormal wear, focusing on whether tread depth is consistent on both sides. 3. Remove foreign objects promptly: Debris in tire treads poses potential hazards and may eject during driving. 4. Perform wheel alignment regularly: When the vehicle pulls to one side or exhibits abnormal steering, align the tires promptly to prevent further issues. Wheel alignment ensures even force distribution across all four tires, avoiding excessive wear.
11
0
Share

Should You Go for Driving Practice in the Rain?

You can go for driving practice on rainy days. Here are some precautions for the Subject 2 driving test in the rain: 1. Wipe the rearview mirrors clean before getting in the car: During the test, you are not allowed to stick your head out, and you cannot reach out to wipe the mirrors after fastening the seatbelt. 2. Do not close the car windows too tightly: Otherwise, fog will form inside the car, affecting visibility. 3. Turn on the windshield wipers promptly: Adjust the wiper speed according to the intensity of the rain to ensure clear visibility. 4. Control the speed: It's best to drive a bit slower than usual. 5. Shake off mud and water from the soles of your shoes before getting in the car: This prevents slipping. Avoid sudden acceleration and braking during the test, as the road is slippery in the rain, which can easily cause the wheels to skid. Stay calm and operate with caution.
14
1
Share

What is the displacement of 652t?

652t is not a displacement indicator, but a tail badge used by Buick models. The '6' signifies that the engine torque is greater than or equal to 350 Nm, the '5' indicates the use of a 9AT transmission, the '2' represents the version of the internet-connected system, and the 'T' stands for turbocharging. Below are specific details about Buick: 1. Brand: The Buick (BUICK) logo features a pattern resembling 'three bullets,' which serves as its graphic trademark and is the emblem of the Buick division. It is mounted on the car's radiator grille. The three bullets, colored differently (from left to right: red, white, and blue) and arranged at varying heights, convey a sense of proactive advancement and continuous striving. 2. Company: Buick is an automobile brand under General Motors, established in 1900 in Detroit, Michigan, USA. The Buick logo consists of three differently colored shields arranged diagonally within a circle.
7
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.