Is Toyota ECVT durable?

1 Answers
WilliamLee
07/30/25 6:49am
ECVT durability exceeds all automatic transmissions, as this model is not strictly a transmission in the technical sense. Although the Toyota E-CVT transmission is named as such, it does not function like a traditional transmission. Moreover, despite having 'CVT' in its name, it bears no relation to the steel-belt-driven CVT transmissions—the only similarity lies in the smoothness of power delivery. Simply put, the E-CVT transmission consists of two electric motors and a set of planetary gears, combining engine power with motor power through different operational logics and states to deliver it to the wheels. Hence, the official designation is: power split device. Since it lacks friction components like steel belts, it has no connection to the weaker CVT transmissions. The durability of E-CVT is far superior to CVT transmissions and even more robust than AT transmissions.
Was this review help?
6
2
Share
More Forum Discussions

What are the engine specifications of the TERRAIN?

TERRAIN currently available models are equipped with two engine options: 5.3L and 6.2L, both of which are Ecotec3 engines with actual displacements of 5328ml and 6162ml respectively. Here is more information about the TERRAIN: 1. Introduction: The TERRAIN is a mid-size SUV and one of the brands under General Motors (GMC). 2. Features: The TERRAIN comes equipped with features such as six airbags throughout the vehicle, vehicle stability control system, OnStar anti-theft system, rearview camera system, 6-speaker AM/FM/CD audio system, USB external connection port, XM satellite radio, power liftgate, 7-inch LCD display, and Bluetooth wireless connectivity. The higher-tier SLT model additionally includes chrome trim, power sunroof, and rear-seat DVD entertainment system.
5
4
Share

How to Check the Oil Dipstick on the Bin Yue?

Here are the specific steps to use the oil dipstick on the Bin Yue: 1. Approximately 5 minutes after turning off the vehicle, pull out the dipstick, wipe it clean, reinsert it, wait for about 2 seconds, and then pull it out again. 2. If the oil level is between the upper and lower marks on the dipstick, it indicates a normal oil level. If it is below the lower mark, the oil is insufficient; if it is above the upper mark, there is too much oil. Below is additional information on how to check the oil dipstick in a car: 1. After turning off the car, wait for 10 minutes, then open the engine hood and locate the oil dipstick. 2. Gently pull out the oil dipstick by hand. 3. Use a clean tissue or towel to wipe off the oil on the dipstick. 4. After wiping it clean, reinsert the dipstick back to its original position, making sure it is tightly secured. 5. Pull out the dipstick again and hold it at an angle for easier viewing.
3
2
Share

Where is the auxiliary battery located in the Mercedes-Benz GLC260?

The auxiliary battery of the Mercedes-Benz GLC260 is located on the right side of the trunk. Here is more information about the Mercedes-Benz GLC260: 1. Body dimensions: The length, width, and height of the Mercedes-Benz GLC260 are 4764mm, 1898mm, and 1642mm respectively, with a wheelbase of 2973mm. The tire specification is 235/60R18. 2. Powertrain: It is equipped with a 9-speed automatic transmission, with a top speed of 213 km/h, a maximum horsepower of 197, and a maximum power of 145 kW. 3. Suspension: Both the front and rear suspensions of the vehicle are multi-link independent suspensions.
8
5
Share

Why is the Nissan Teana's one-button start not working?

The common reasons for the Nissan Teana's one-button start not working are as follows: 1. The Nissan Teana's keyless entry system has a specific authentication zone. A valid key must be detected within this effective authentication zone for normal entry and startup. Beyond this zone, normal entry and startup are impossible. The authentication zone is divided into external and internal zones. 2. The driver makes an error in the door-opening action without realizing it. When the driver pulls the door handle while simultaneously touching the small groove on the outer side of the handle, the door cannot be opened or locked. 3. The Nissan Teana has been parked for an extended period. After the car has been parked for a long time, the keyless entry may fail to work when used. This happens because the smart entry system enters a power-saving mode and stops functioning after the car has been parked for a while. To use the keyless entry again, the driver must press any button on the key to deactivate the power-saving mode, after which it will function normally.
13
3
Share

Is It Serious If the Air Conditioner Is Left On After Exiting the Car?

After the engine is turned off, leaving the air conditioner on will not have any impact. The car's air conditioner will automatically shut off once the engine is turned off because it is powered by the engine. When the engine stops, the air conditioner ceases to function. Tips for using the car air conditioner: 1. Turn it off before shutting down the engine: It is best to turn off the A/C button one or two minutes before parking and turning off the engine. This allows the fan to dry out any moisture in the air vents and ducts, preventing bacterial growth inside the air conditioner and reducing the chance of odors. 2. Turn on the air conditioner after starting: If the air conditioner is left on when the engine is turned off, the next time the vehicle is started, the engine will have to bear the load of the air conditioner. Therefore, the best practice is to wait two or three minutes after starting the vehicle, allowing the engine to be fully lubricated, before using the air conditioner.
19
1
Share

Why does the diesel engine starter make a clicking sound but fail to start?

It may be due to a lack of battery power or a faulty motor. Here is a related introduction about the diesel engine starter failing to start: Electrical circuit failure: This possibility arises when the engine stalls due to low-voltage power interruption while driving. At this time, you can mainly check the ignition and starter switches, as well as the fuse box. Electrical component failure: This issue is generally related to the ignition coil, capacitor, or electronic ignition module. The engine may start initially but then stalls after a while, only to start again and stall once more. Fuel system failure: This could be due to a damaged fuel pump, ruptured fuel line, clogged carburetor fuel inlet, or an empty fuel tank. However, in such cases, the car can still be restarted, though with great difficulty.
8
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.