Is Tianjin FAW a Joint Venture or Domestic Car?

What maintenance is needed at 25,000 kilometers?

At 25,000 kilometers, the following maintenance items are required for your car: 1. Replace all vehicle fluids: brake fluid, power steering fluid, transmission fluid, and coolant. For manual transmission cars, there is no need to replace the transmission fluid. For cars with electric power steering, there is no power steering fluid to replace. The lifespan of these fluids is generally 3 years or 60,000 kilometers, whichever comes first. 2. Timing belt: If the car has a timing chain, this can be ignored, but if it has a belt, the belt should be replaced. The belt is frequently under stress, and aging significantly affects its lifespan. There are no warning signs before the belt breaks, and it cannot be detected through inspection. If it breaks, the engine must be repaired, causing significant damage. 3. Cleaning carbon deposits in the fuel system: Carbon deposits in the car can cause various issues, such as difficulty starting in the morning, intermittent idle shaking, poor acceleration, and increased fuel consumption. At this point, cleaning is necessary. If left too long, the carbon deposits will harden.

20

1

Share

What is the SET function in a car?

The SET function in a car is the speed setting switch for cruise control. It is the cruise speed control indicator. To set the cruise speed, accelerate the car to the desired speed and press the SET button. Additional Information: 1. Usage: To use cruise control, first press the [ON] button to activate the cruise control function. 2. Setting: To set the cruise speed, accelerate the car to the desired speed and press the [SET] button. Typically, the car speed should be greater than 30 miles per hour (approximately 48 kilometers per hour). When using cruise control, pressing the brake pedal will deactivate the cruise control function. 3. Resumption: Press the [RSM] button to resume the cruise control function. The speed will return to the previously set standard. While using cruise control, pressing the [ACCEL] button will increase the cruise speed. Pressing the [CST] button will decrease the cruise speed.

9

5

Share

How Long Can Faux Leather Seats Last?

Faux leather seats can last for five to six years. Below are the specific details about faux leather seats: 1. Characteristics: They offer advantages such as wear resistance, cold resistance, breathability, aging resistance, soft texture, environmental friendliness, and an attractive appearance. 2. High-end materials: They can last for ten to eight years without issues. Below is extended information on precautions for faux leather seats: 1. Sun protection: When parking in summer, avoid parking outdoors for extended periods as prolonged exposure to sunlight can cause cracking. 2. Features: The surface is smooth and fine, with well-defined patterns and a very fine density. Genuine leather seats have a relatively rougher surface, with deeper embossing, giving a more traditional and luxurious feel at first glance.

8

2

Share

How many days does it take to license a motor vehicle?

Generally, for motor vehicle licensing, if you choose the on-site number selection method, you can receive the license plate on the same day after completing the procedures. If you opt for self-selected numbering or online number selection, it normally takes about 7-15 working days to make the license plate before notifying the owner to collect it. Before licensing a motor vehicle, pay attention to the following four points: 1. Determine the city for license plate processing before paying the purchase tax: According to regulations, the vehicle purchase tax should be paid at the vehicle's registered location. If you choose a local license plate, the purchase tax must be paid locally; if you choose an out-of-town license plate, the purchase tax must be paid out of town. 2. Parallel imported vehicles must have all relevant certificates when licensing: Parallel imported vehicles require numerous materials for licensing, such as the imported vehicle inspection form, vehicle information sheet, cargo import certificate, vehicle conformity certificate, invoice, etc.

7

0

Share

What are the reasons for the engine warning light in the Baojun 730?

Sensor issues, car maintenance problems, fuel quality issues, poor combustion of the air-fuel mixture, engine intake problems, turbocharging issues, exhaust problems, and anti-theft system malfunctions are the main reasons for the engine warning light to illuminate. Additionally, during vehicle startup, the car performs a self-check on the engine system. Normally, the engine warning light will turn off after the self-check is completed. If it remains lit for an extended period, it is advisable to visit a repair station promptly for professional assistance to diagnose and eliminate potential safety hazards. Below is a detailed explanation of each type of fault: Sensor problems: Sensors include those for coolant temperature, crankshaft position, air flow, intake air temperature, oxygen sensors, etc. When these sensors are damaged, have poor contact, or experience signal interruptions, the car's ECU cannot accurately obtain engine data, leading to the engine warning light turning on. In such cases, it is essential to seek professional inspection at a repair center to promptly address safety concerns. Maintenance issues: Poor engine maintenance is the most common cause of the engine warning light illuminating. Vehicles have specific maintenance schedules. Failure to adhere to these schedules, combined with poor driving habits, can increase the operational burden on the engine, eventually causing the engine warning light to turn on as a reminder of a malfunction. Fuel quality issues: This refers to both fuel and engine oil. The fuel used in cars typically has a specific grade, and engine oil can be semi-synthetic or fully synthetic. Manufacturers usually recommend the type of fuel and engine oil to use. If the owner fails to follow these recommendations over time, it can lead to engine wear, triggering the warning light. Always use the recommended fuel grade and appropriate engine oil for the vehicle. Poor combustion of the air-fuel mixture: Faulty spark plugs, ignition coils, fuel pumps, or clogged fuel lines can cause poor combustion of the air-fuel mixture in the engine. This leads to issues like engine carbon buildup or knocking, which are detected by the oxygen sensors and reported to the ECU, resulting in the warning light turning on as a warning. Intake problems: The engine requires air for combustion, making the air filter crucial. If the car's air filter is dirty or not cleaned regularly, it can affect the engine's air intake, potentially leading to blockages over time. Severe cases can cause the engine warning light to illuminate. Turbocharging issues: Problems with the intake turbocharging pipes or the turbocharger itself can also cause the engine warning light to turn on. The most common issue is a damaged turbocharger, accompanied by symptoms like oil leaks, high oil consumption, reduced power, metallic noises, or blue/black smoke from the exhaust. Exhaust problems: Faults in the rear oxygen sensor, catalytic converter, exhaust camshaft, or bearings can trigger the engine warning light. The most frequent issue is a malfunctioning catalytic converter. Factors such as using leaded gasoline, lead or silicon-based lubricant additives, physical damage to the catalytic converter, or fuel system malfunctions can easily cause catalytic converter failures.

1

3

Share

What are the differences between dry and wet dual-clutch transmissions?

The differences between dry and wet dual-clutch transmissions can be categorized into three aspects: transmission efficiency, response speed, and torque capacity. Additional information: 1. Transmission efficiency: From the structure of the clutch, it can be observed that the wet clutch has a more complex design. A more complex structure implies higher energy loss, resulting in lower transmission efficiency for wet dual-clutch transmissions. This means they consume more engine power, and under unchanged conditions, it leads to higher fuel consumption. 2. Response speed: Dry clutches transmit power through direct contact of metal plates, providing more immediate power transfer. When the metal plates are pressed together, the transmission ratio increases, delivering direct and noticeable effects. In contrast, wet clutches use oil as an intermediary, involving a process where the driving plate accelerates, increasing the centrifugal force of the oil, which then accelerates the driven plate. This additional step results in a slightly slower response speed. 3. Torque capacity: The metal friction plates in dry clutches cannot withstand excessive torque. If subjected to significant stress impact, the friction plates can be easily damaged. Therefore, dry clutches are only suitable for vehicles with small-displacement engines and low torque output. Some vehicle models even deliberately limit the engine's torque output in lower gears to adapt to dry clutches and protect the transmission clutch.

1

0

Share

Is Tianjin FAW a Joint Venture or Domestic Car?

What maintenance is needed at 25,000 kilometers?

What is the SET function in a car?

How Long Can Faux Leather Seats Last?

How many days does it take to license a motor vehicle?

What are the reasons for the engine warning light in the Baojun 730?

What are the differences between dry and wet dual-clutch transmissions?

How to heat the rearview mirror of Audi Q3?

How Can Beginners Skillfully Operate the Steering Wheel?

Can I Buy a Car in Another Province and Register It There?

What are the differences between BMW 3 Series GT and 3 Series?