Is There Intentional Failure in Subject 2 Driving Test?

1 Answers
LukeFitz
07/29/25 11:19am
No. Driving schools and examination departments do not intentionally set up obstacles. As long as you truly master traffic regulations and driving skills, you will definitely pass the Subject 2 test smoothly. Assessment Content of Subject 2: Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment. It is the abbreviation for the field driving skills test. For the C1 license, the test items include five mandatory components: reversing into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and driving through curves (commonly known as S-turns). In some regions, there is an additional sixth item: high-speed toll card collection. For the C2 license, the test items include four mandatory components: reversing into a garage, parallel parking, turning at a right angle, and driving through curves (commonly known as S-turns). Precautions for Subject 2 Test: When reversing into a garage, pay attention to controlling the speed. Starting must be completed within 30 seconds. During parallel parking, reasonably control the 30cm side distance and reference points. When driving through curves, adjust the vehicle body slowly and try to ensure the wheels do not cross the lines. During right-angle turns, find the right moment to turn the steering wheel.
Was this review help?
8
3
Share
More Forum Discussions

What to Do When Your Car Breaks Down?

Park the car in a safe area, set up the warning triangle, and inform the following vehicles to detour as there is a car breakdown here. While waiting for rescue, do not sit in the car or stand right in the middle of the road. Keep a safe distance from the car to protect yourself.
16
4
Share

Where is the Prado jack and how to take it out?

Prado jack is located in the trunk. There is a square cover on the left side that can be pulled down and opened to see it. Use the tools in the trunk to loosen the jack and take it out. Prado is also called Land Cruiser Prado. Taking the 2019 Prado Automatic Premium Edition as an example, it is a mid-to-large size 5-door 7-seat SUV with body dimensions of 4840mm in length, 1885mm in width, and 1890mm in height, with a wheelbase of 2790mm. The 2019 Prado Automatic Premium Edition is equipped with a 3.5L naturally aspirated engine, with a maximum power of 206kW and a maximum torque of 365N·m. The front suspension uses a double-wishbone independent suspension, and the rear suspension uses a four-link non-independent suspension.
1
2
Share

What are the reasons for the car not moving when the transmission is engaged?

The reasons for the car not moving when the transmission is engaged are: clutch, transmission, and drive axle failures. It is advisable to promptly take the vehicle to a repair shop for inspection. Regular maintenance of the transmission can be performed in the future, including timely replacement of the transmission oil and filter. When changing the transmission oil, the interior of the transmission can also be cleaned. The main functions of the transmission are: 1. To change the transmission ratio, expanding the range of torque and speed variations of the driving wheels to adapt to frequently changing driving conditions, allowing the engine to operate under favorable conditions; 2. To enable the car to reverse while maintaining the same engine rotation direction; 3. To interrupt power transmission by using neutral gear, allowing the engine to start, idle, and facilitating gear shifting or power output.
17
1
Share

What to Do If the Car Roof is Dented by a Branch?

If a citizen's car is damaged or scratched by trees on the roadside, the owner can bring relevant documents to the landscaping department for registration and may eventually receive 95% compensation. If the car owner has collision insurance and the car is hit by a tree due to strong winds, the insurance company can provide up to 70% compensation.
2
2
Share

What Causes ETC Display Tag Failure?

ETC tag expiration is a common issue, primarily caused by users privately removing or relocating the OBU device, or due to the ETC electronic tag becoming loose and detached. Since ETC is vehicle-specific and has a protective interlock during installation, there is a push-button switch on the side that adheres to the car's front windshield. If this button is triggered twice consecutively, it will cause the ETC electronic tag to fail. The ETC installation process is as follows: Upon receiving the device, first check if the ETC card and electronic tag (OBU) are damaged. Press the anti-tamper button on the back of the OBU. A red light will briefly illuminate, and the OLED screen will display "Tag Invalid" or "Please Insert Card," indicating the device is functioning normally. Clean the front windshield to ensure the surface is smooth, clean, and dry. Then peel off the adhesive backing of the OBU and attach it to the installation position. Press firmly for 2-3 minutes to remove any air bubbles. Insert the ETC card with the front side facing the driver and the back side facing the windshield, ensuring the chip is inserted into the OBU device. ETC activation method: Insert and remove the ETC card twice consecutively until the electronic tag screen displays "Bluetooth On." If "Tag Invalid" appears after inserting and removing the card twice without attaching the electronic tag, this is normal and does not affect activation. Alternatively, press the button on top of the electronic tag to enable Bluetooth. Turn on your phone's Bluetooth and open the corresponding mobile app (usually with a download QR code on the electronic tag). Navigate to the device activation interface. Click "Connect Device" and wait patiently for the "Connection Successful" prompt. Once connected, upload a photo of the vehicle's front to complete activation.
5
0
Share

How to Connect Bluetooth Audio Source in a 2013 Audi A4?

Enter the vehicle and press the one-touch start button, then select the Tel button option inside the car. Next, look at the central control screen in the car, where you will see several options. Click on the option to switch to the connection manager. Then, select "Connect Mobile Phone" to put the car's system into a connectable state. Now, take out your phone, open the Bluetooth option in the settings on your phone's home screen, enter the Bluetooth connection interface, and click to pair the Bluetooth signal.
2
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.