Is There Any Impact When Replacing Only One Car Tire?

1 Answers
DelSawyer
07/29/25 2:21am
If the tread wear on the car tires is relatively minor, replacing only one tire will not have an impact, but it is essential to ensure that the tires on the same axle have consistent tread patterns, structure, brand, and specifications. However, if the tread wear is severe, replacing only one tire can significantly affect driving safety, potentially causing the vehicle to pull to one side or even lose control. When tire wear is severe, the new tire will have greater friction and grip compared to the old tire, which has relatively weaker traction. Replacing only one tire can lead to uneven grip, resulting in pulling or loss of control. Additionally, the vehicle may experience uneven height, leading to bumpiness or pulling issues at higher speeds.
Was this review help?
5
4
Share
More Forum Discussions

Can the Cover on the Engine Be Removed?

The cover on the engine cannot be removed because it protects the engine from natural elements like rain and snow, and prevents debris from falling into the engine. Functions of the Cover: The engine cover helps to isolate noise, significantly reducing the impact of engine noise and improving driving comfort. It also provides insulation for the engine, shortening the warm-up time during cold starts, reducing fuel consumption, and minimizing carbon buildup inside the engine. Additionally, it shields the engine from dust. Hazards of Removing the Cover: Arbitrarily removing the engine cover not only poses risks to the normal operation of the engine but also accelerates wear and tear on engine components. The failure rate of parts due to erosion by rain, snow, and other elements increases, shortening their lifespan and severely affecting the engine's performance. Moreover, it increases the vehicle's running resistance, leading to higher fuel consumption.
3
4
Share

Can a Car Run Long Distances After Engine Water Damage Repair?

It is not recommended to drive long distances after repairing a car engine that has suffered water damage. Vehicles that have been submerged in water experience significant damage to internal electronic components, and even after repairs, there is no guarantee that the vehicle will fully return to its original condition. If operational system failures occur while driving, it can lead to severe consequences. Therefore, long-distance travel is not advisable for flood-damaged vehicles. Safety Hazards of Flood-Damaged Vehicles: Electronic System Failures: After water exposure, the engine's electronic modules are highly prone to short circuits due to rust and corrosion caused by water immersion. Additionally, vehicle wiring is easily damaged by water. If these modules or wiring malfunction, it may cause certain vehicle functions to fail or even lead to fires. Engine Failures: After water ingress, the engine must not be turned off, as this can cause the engine block to crack. When the crankshaft pushes the connecting rod to compress the piston, water cannot be compressed. The connecting rod bends under the resistance of the water. If the owner attempts to restart the vehicle after the engine has stalled due to water ingress, it may result in an irreparable engine block fracture.
2
1
Share

What is the green book for motorcycles called?

Motorcycle's green book is the motor vehicle registration certificate. Definition of motor vehicle registration certificate: It is the necessary property ownership document for the vehicle and the legal proof of vehicle ownership. It is kept by the vehicle owner and not carried with the vehicle. It is required to be presented when handling any vehicle registration procedures such as transfer of ownership or change of registration, and records the relevant information of the vehicle, equivalent to the vehicle's household registration book. Notes for reissuance: After realizing the loss, you need to apply for a reissuance at the vehicle management office. When applying for reissuance, the vehicle needs to be inspected, so the vehicle must be brought to the vehicle management office. Also, it is important to note that if there are any aftermarket or modified parts, they must all be removed first.
18
5
Share

What are the reasons why a Nissan won't start?

The reasons why a Nissan won't start include low fuel in the tank, low battery charge, abnormal fuel pump, or a clogged exhaust pipe. First, check if there is fuel in the tank. A vehicle lacking fuel naturally won't start. If the fuel level is very low, check if the car is parked on a slope. When the ground has a significant incline, the fuel in the tank may gather on one side, potentially preventing the fuel pump from supplying fuel properly, leading to the vehicle's inability to start. Check if the vehicle's battery has sufficient charge. If, when starting the engine, you only hear a weak sound from the starter, it's likely due to a depleted battery causing the startup failure. In such cases, the issue can only be resolved by jump-starting or replacing the battery. Method to check if the fuel pump is functioning normally: Generally, when the vehicle is powered on, you can hear a slight sound from the fuel pump turning, which automatically stops after three to five seconds. If you don't hear this sound, the fuel pump may not be working correctly. Such faults usually occur in older vehicles. Most vehicles currently require pressing the clutch pedal (or brake pedal for automatic transmission models) to start normally. However, sometimes, after prolonged parking, the brake pedal may become stiff and hard to press. In this case, the driver needs to press the pedal firmly until the brake light switch is triggered before starting the vehicle. For automatic transmission models, also check if the gear is in P (Park) or N (Neutral) when starting; otherwise, the vehicle won't start. Automatic transmission vehicles cannot start if the gear is in D (Drive) or R (Reverse).
19
4
Share

What Causes the Gear Shift Lever to Shake?

Some models equipped with manual transmissions may experience gear shift lever shaking. A slight tremor in the manual gear shift lever is considered normal. A manual transmission requires the driver to manually move the gear shift lever to change the gear engagement inside the transmission, thereby altering the gear ratio to achieve speed changes. Reasons for Gear Shift Lever Shaking: Most MT (manual transmission) vehicles exhibit some level of shaking. In these models, the gear shift lever is directly connected to the transmission, which in turn is directly connected to the engine. As a result, the engine's inherent vibrations can cause the gear shift lever to shake slightly, which is a normal phenomenon. Severe Gear Shift Lever Shaking: However, if the gear shift lever shakes excessively, it is likely due to incomplete gear coupling. Although the gears may be in contact, they are not fully engaged, preventing power transfer. When the clutch is released while the gears are not fully coupled, the shift lever remains connected to the gears via the linkage, causing the lever to shake. Solutions for Severe Gear Shift Lever Shaking: Severe shaking of the gear shift lever usually indicates that the gear is too high. The driver can downshift or increase speed. If the shaking is particularly severe, immediately press the clutch and downshift by one gear to prevent stalling.
1
0
Share

Can Small Stones Chip Off Car Paint?

Small stones can chip off car paint. Car paint is a protective film sprayed onto vehicles, serving as a type of coating that prevents the body from corroding easily while providing an aesthetic appeal. Different car paints yield different effects, and the quality of the paint itself, along with the technology used and a good painting environment, are all crucial factors. Methods for repairing car paint: For very shallow scratches, immediately treat them with a compound. Wipe in straight lines until the scratch disappears, then use a finer compound for polishing, followed by waxing. For deeper scratches, the key is to check if the metal surface is exposed. If the metal is not visible, rust won't form, and you can focus on applying touch-up paint. Use the tip of a brush to dab the paint gently, then wait for it to dry completely. For deep but fine scratches, colored putty can be an effective repair solution. Use sandpaper on the scratched area without unnecessarily enlarging the surface, ensuring dirt is thoroughly cleaned. Apply the putty carefully to fill the scratch completely, then finish with a compound and wax.
1
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.