Is There Any Impact of Leaving Sunglasses in the Car During Summer?

Where is the best place to install ETC?

For small cars, the ETC is generally installed in the upper middle part of the front windshield. For large vehicles such as trucks and buses, the installation position is in the lower middle part. The suitable installation position should be no lower than 1.2 meters and no higher than 2.5 meters, with an installation angle between 30 to 90 degrees. If the vehicle has a sunshade film or if a sunshade film is installed later, it may affect the signal transmission of the microwave communication link. In such cases, the ETC should be installed in the microwave sunroof strip. ETC is the abbreviation for Electronic-Toll-Collection, meaning electronic toll collection system. To apply for ETC, you need to provide the original and photocopy of the vehicle owner's valid ID card and driving license. If the application is not made by the owner, the agent's valid ID card is also required. The photocopy of the driving license should include the page with the most recent annual inspection stamp. Additionally, a bank card for deducting highway tolls is required, and the vehicle must be registered under the name of an individual aged between 18 and 60. Here are some precautions for installing ETC: Do not block the view; it is best to install it behind the rearview mirror: Many car models have a large inclination angle of the windshield, which reduces the driver's field of vision. If this is not considered during ETC installation, it will increase the driver's blind spot. Installing it on the right side behind the rearview mirror can avoid blocking the view. Do not affect charging: The ETC electronic tag consumes power but generally does not require charging or battery replacement because it has a solar panel on the back that can charge itself. Therefore, during installation, avoid the black areas on the windshield and positions that may block the solar panel. Once installed, do not remove it casually: The button in the middle of the adhesive is an anti-removal lever connected to a switch. After the electronic tag is installed, the windshield will press the anti-removal lever in. If the tag is removed casually, the lever will pop out and trigger the switch, locking the electronic tag and making it unusable. In such cases, you will need to visit an ETC service point to unlock it. This is designed to prevent multiple vehicles from sharing one device. Precautions for using ETC: The ETC transaction sensing area is 8 meters. To prevent the ETC device of the vehicle in front from malfunctioning, maintain a distance of more than 10 meters from the vehicle in front to avoid automatic toll payment for the vehicle ahead. The recognition speed for ETC lanes is 20 kilometers per hour. Driving too fast may result in failure to read the vehicle's device information and lead to toll deduction failure. When using a debit card bound to ETC, insufficient balance may also cause toll deduction failure.

9

1

Share

Which country is the Jaguar car brand from?

Jaguar is a top-tier luxury car brand used by the British royal family, selling luxury sedans, sports cars, and coupe SUVs. It was founded in 1922 and is headquartered in the UK. Main models include the I-PACE, XJ, XF, F-Type, XK, Cambridge Limited Edition, etc. The key milestones in Jaguar's development are as follows: 1935: The first Jaguar model, the SS100, was born. 1953: With its newly developed secret weapon, the "disc brake," Jaguar began its legendary run on the Le Mans circuit. March 2004: Jaguar officially entered the Chinese market. July 2009: The all-new Jaguar XJ made its global debut. February 2014: The all-wheel-drive Jaguar XJ successfully challenged extreme low temperatures worldwide. January 2015: Jaguar announced the mass production of the C-X17 concept car, naming it the F-PACE. December 2020: Ranked 165th on the 2020 World's 500 Most Influential Brands list.

14

4

Share

How effective is the sound insulation in a car trunk?

Trunk sound insulation is effective. Installing sound insulation cotton in the trunk can absorb some of the energy produced by noise and convert it into heat for dissipation. Applying soundproofing and vibration-damping panels to the trunk can effectively reduce vibrations during driving, while adding sound-absorbing cotton on the outer layer can effectively block exhaust pipe noise as well as tire and road noise during driving. Additionally, performing the same sound insulation treatment on the wheel arches inside the trunk can further prevent tire noise from entering the cabin. The sound insulation materials used should meet the following standards as much as possible: 1. The material should be lightweight, as lightweight is a major trend in the automotive manufacturing industry. Lightweight materials won't significantly increase the vehicle's weight or fuel consumption after installation. 2. It should have good sound insulation and absorption performance across a wide frequency range, with long-term stability and reliability. 3. It should have sufficient strength, be resistant to damage during installation and use, and have good aging resistance, weather resistance, and a long service life. 4. It should have a clean appearance and be pollution-free. 5. It should be moisture-proof, waterproof, corrosion-resistant, insect-proof, and resistant to mold. 6. It should be non-flammable, preferably fire-retardant. 7. It should be an eco-friendly material, free from harmful substances such as asbestos or fiberglass. 8. The material itself should be easy to work with, such as being easy to cut and firmly adhesive.

19

0

Share

What is the problem when the brake pedal cannot be pressed down?

The reasons why the brake pedal cannot be pressed down include a dead key fob battery, failure of the car's vacuum booster pump, obstruction by foreign objects on the brake pedal, or brake system failure. Below are detailed explanations of the specific causes for the brake pedal not being able to be pressed down: 1. Dead key fob battery: If the car's key fob battery is dead, the car may exhibit symptoms such as failure to start, no response when pressing the brake, or the brake pedal being hard to press. In this case, simply replacing the key fob battery will resolve the issue. 2. Failure of the car's vacuum booster pump: If the car's vacuum booster pump fails, the car may experience issues where the brake pedal cannot be pressed down or does not return after being pressed. If the brake pedal cannot be pressed down after pressing it several times when the car is turned off, this is a normal condition. This happens because the vacuum booster pump stops working when the car is off, and repeatedly pressing the brake releases the remaining vacuum boost, making the brake pedal hard to press. 3. Brake system failure: The causes of brake system failure can be complex. It is best to drive the vehicle to a repair shop or a 4S store for professional inspection and repair.

11

4

Share

What is the difference between 5w30 and 5w-40?

The letter W stands for winter. The smaller the number before W, the lower the low-temperature viscosity, the better the low-temperature fluidity, and the lower the applicable minimum temperature. The differences between 5w30 and 5w40 engine oils are as follows: 1. Different kinematic viscosity standards at 100 degrees Celsius: 5w40 has higher viscosity than 5w30, while 5W-30 has slightly lower viscosity than 5W-40, providing better protection under high-temperature conditions. 2. Differences in fluidity and protection: The lower the oil viscosity, the thinner the oil film and the better the fluidity, but under high temperature and high pressure, the protection is worse.

20

2

Share

What are the reasons for the malfunction of the GAC GS8 reversing camera module?

The reasons for the malfunction of the GAC GS8 reversing camera module are as follows: 1. The camera is damaged or blocked. If the camera is damaged, the image cannot be uploaded to the computer, so it will not display. If foreign objects block the camera, it will show a black screen. 2. The display screen is damaged. When the display screen remains black or shows a distorted image, it indicates that the module is damaged and needs to be inspected and repaired at a repair shop or 4S store. Here is some extended information about the reversing camera: 1. The reversing camera is also known as the parking assist system, or the reversing visual system, or the vehicle monitoring system. English name: vehicle-back-up-camera. This system is widely used in various large, medium, and small vehicles for reversing or driving safety assistance. 2. The reversing camera system can provide a clear view at night through infrared rays. Professional vehicle probes have further improved anti-magnetic, anti-shock, waterproof, and dustproof performance.

20

1

Share

Is There Any Impact of Leaving Sunglasses in the Car During Summer?

Where is the best place to install ETC?

Which country is the Jaguar car brand from?

How effective is the sound insulation in a car trunk?

What is the problem when the brake pedal cannot be pressed down?

What is the difference between 5w30 and 5w-40?

What are the reasons for the malfunction of the GAC GS8 reversing camera module?

How to reset the maintenance light on a 2016 Octavia?

What is the fuel tank capacity of the 2017 Jetta?

Are Car Sealing Strips Useful?

How often should a new car undergo annual inspection?