Is there any impact if the driver's license is reviewed a few days late?

2 Answers
BraydenRose
07/29/25 12:42am
There is no impact if the driver's license is reviewed a few days late. If the driver's license expires within less than a year, the owner can still follow the normal procedure to renew the license and undergo the annual review. Below are the specific details about the driver's license annual review: 1. Regulations: Article 35 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses" issued by the Ministry of Public Security stipulates that motor vehicle drivers should apply for license renewal at the vehicle management office of the issuing authority within 90 days before the expiration of their driver's license. 2. Procedures: When applying, the applicant must fill out the "Motor Vehicle Driver's License Application Form" and submit the identity proof of the motor vehicle driver, the motor vehicle driver's license, and a medical certificate issued by a county-level or above medical institution or a military medical institution at or above the regimental level. For applications to drive small automatic transmission passenger vehicles specially designed for the disabled, a medical certificate issued by a specialized medical institution designated by the provincial health authority must be submitted.
Was this review help?
20
4
Share
DelIker
08/12/25 4:54am
To be honest, being a few days late for your driver's license renewal won't have much impact. Most cities now have a grace period, usually within 30 days. I was late once myself—got caught up with work and forgot, ended up being 5-6 days late at the DMV. The staff said it’s fine as long as you don’t get pulled over by traffic police, and usually there’s no fine. Just don’t drag it out too long to avoid trouble. Still, it’s better not to take the risk—if your license expires for too long, it may become invalid, requiring you to retake the written test, which costs both time and money. I recommend checking your license expiration date regularly and setting a phone reminder just in case. After all, if you’re driving with an invalid license and get into an accident, insurance won’t cover it, and you’ll be fully liable—losses could be huge. Safety first, right?
Was this review help?
3
3
Share
Expand All
More Forum Discussions

Where is the switch for the Honda CR-V's non-functioning reverse radar?

Honda CR-V's reverse radar alarm switch is located on the control panel on the left side of the vehicle's center console. It is a button marked with a 'P' and a signal symbol. The principle and functions of the reverse radar are introduced as follows. Principle of the reverse radar: The reverse radar emits ultrasonic waves through ultrasonic sensors. When these waves hit an obstacle and reflect back, they are received by the ultrasonic sensors. The controller then calculates the distance to the obstacle based on the time taken for the ultrasonic waves to be emitted and returned. Finally, the buzzer emits a rapid alarm sound to alert the driver. Main functions of the reverse radar: Accurately measure the distance between the rear of the vehicle and the nearest obstacle; when reversing to the limit distance, it can emit a rapid warning sound to remind the driver to brake; it can repeatedly emit a voice warning sound to alert pedestrians.
4
2
Share

What is the reason for the jerking and surging when accelerating at low speed in a GL8?

Introduction to the reasons for jerking and surging when accelerating at low speed in a GL8: Excessive carbon deposits in the throttle body, fuel injectors, and intake manifold: Many faults are caused by carbon deposits, and some vehicles may experience jerking due to carbon buildup. It is recommended to regularly clean carbon deposits. Poor fuel quality: Substandard or incompatible fuel quality leading to incomplete combustion. Faulty spark plugs, ignition coils, etc., causing cylinder misfires: It is necessary to have them inspected and repaired at a service center to avoid more safety hazards. Jerking when accelerating at low speed in a car can be a normal phenomenon under the following circumstances: For manual transmission models: When driving in a semi-clutch state, accelerating or decelerating can cause a jerking sensation, which becomes more pronounced with deeper throttle application. For automatic transmission models: There may be a slight jerking sensation when upshifting during acceleration, which becomes more noticeable when forcing a downshift and then upshifting with a heavy throttle.
19
0
Share

How to Connect Geely Emgrand with Mobile Phone?

Enable USB debugging on your mobile phone. Turn on Bluetooth and connect to the car's infotainment system. Connect your phone to the USB port inside the center console using a USB cable. Click G-link on the car's infotainment system, allow USB debugging, and agree to install the mobile phone interconnection service.
10
3
Share

How many seats does the GL8 business vehicle have?

The GL8 is a 7-seater business vehicle. Below is relevant information about the GL8's exterior and its onboard systems: GL8's exterior: In terms of appearance, the new family-style winged chrome front grille and the crystal LED headlights on both sides are the most notable features of the front end. It continues Buick's 360-degree surround intelligent cockpit design language, with dual 12-inch vertical screens adopting a through-type design for the full LCD instrument panel and the central control screen. The full LCD instrument panel, large central control screen, and HUD head-up display are undoubtedly the most striking features inside the vehicle. These three screens can display independently or interact with each other. Systems equipped in the GL8: The ES central control screen is equipped with the Buick eConnect 3.0 system and provides users with the 'OnStar 4G vehicle connectivity application lifetime free data' service, offering 100GB of data annually.
7
5
Share

What is the function of a three-way catalytic converter cleaner?

The functions of a three-way catalytic converter cleaner are as follows: 1. Improve the oxidation-reduction efficiency of the three-way catalytic converter. 2. Reduce exhaust emissions, unclog the three-way catalytic converter passages, lower exhaust backpressure, and enhance engine horsepower. 3. Decrease fuel consumption and extend the service life of the three-way catalytic converter. Precautions for using a three-way catalytic converter cleaner: 1. Before cleaning, check whether the catalytic converter has mechanical damage, thermal sintering, has exceeded 200,000 kilometers, or suffers from lead poisoning. If any of these conditions exist, cleaning will be ineffective. 2. Check whether the air-fuel mixture concentration is appropriate. 3. Before cleaning the catalytic converter, clean the throttle valve, fuel injectors, and combustion chamber. 4. During the cleaning process, do not let the engine stall. 5. During the cleaning process, the idle speed should not be too high to avoid overheating the three-way catalytic converter.
3
0
Share

How to Remove the Wiper Blades on a Nissan Sylphy?

Lift the wiper arm away from the vehicle's windshield. Position the wiper perpendicular to the windshield, ensuring the wiper remains stable. Press the tab on the wiper blade and remove the old wiper blade to separate it from the metal arm.
3
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.