Is There Any Danger if the Vehicle License Is Leaked?

2 Answers
LillianaMarie
07/24/25 12:17pm
Leaking vehicle license information is not serious and generally poses no major issues. Below is relevant information: Vehicle License Plate Replacement: To replace a vehicle license plate, the owner must present their original ID card and the vehicle registration certificate (the large green booklet issued at the time of registration). Without these two documents, the plate cannot be replaced. If someone is acting on behalf of the owner, they must present their own original ID card, the owner's original ID card, and the vehicle registration certificate. The vehicle license alone is not sufficient. Risks of Information Leakage: The biggest risk of leaking vehicle license information is that the vehicle could be cloned by others. Regulations clearly state: For vehicles confirmed to have been cloned, traffic violation records incurred during the period of cloning can be voided, and the owner may apply for a new license plate number and vehicle license.
Was this review help?
3
2
Share
StBrantley
08/11/25 6:24am
I realized how dangerous it can be when the vehicle license gets leaked. Last year, I had a similar experience—I lost my documents, and soon after, I received a call from a stranger claiming someone had run a red light using my license plate, nearly getting me fined. The vehicle license contains real names, vehicle models, and engine numbers, and once this information is leaked, criminals can easily forge documents to steal cars or impersonate the owner to sell them. Even worse, they might use it to take out loans or purchase car insurance, leaving you with debt disputes to deal with. Personally, I’ve made it a habit not to leave the vehicle license in plain sight inside the car—I always lock it in a home safe. I also regularly check the traffic management app for any suspicious records and immediately report and freeze the documents if a leak occurs. At least this helps reduce the risk of identity theft—never underestimate how severe the consequences can be.
Was this review help?
1
1
Share
Expand All
More Forum Discussions

How Often Should Wheel Rims Be Replaced?

Wheel rims do not have a specific replacement interval. However, if the rims show signs of bending, cracking, severe corrosion, or other damage, they should be replaced promptly. Failing to replace damaged rims can lead to tires slipping off the rims or even loss of vehicle control. Wheel rims are typically made through casting or forging processes, often using lightweight materials. A simple quality check can be done by tapping the rim—clear, ringing sounds usually indicate good quality. Rim sizes generally range from 12 inches to 21 inches, with 14 to 17 inches being the most commonly used. Compared to steel rims, aluminum alloy rims are lighter, more precisely manufactured, stronger, and offer lower inertial resistance during driving, which improves straight-line driving performance and can also reduce oil consumption.
11
1
Share

What is the function of a battery?

The functions of a battery: 1. Provide power to the starter when starting the engine; 2. Assist the generator in supplying power to electrical equipment when the generator is overloaded; 3. Supply power to electrical equipment when the generator is not generating electricity or the voltage is low; 4. When the generator's terminal voltage is higher than that of the lead-acid battery, convert a portion of the electrical energy into chemical energy for storage. A battery is an electrochemical device that stores chemical energy and releases electrical energy when necessary. After discharging, it can regenerate the internal active materials through charging, storing electrical energy as chemical energy, and convert the chemical energy back into electrical energy when discharging is required.
18
1
Share

Why did the subject four exam reservation change to subject three?

Normally, there are only three subjects within the standard scope of the motor vehicle driver's license examination. Subject three consists of the road driving skills test and the safety and civilized driving knowledge test. However, most driving schools classify the safety and civilized driving knowledge test as subject four. Therefore, when making an exam reservation, it may display as subject three, but this does not affect the actual process. Relevant details are as follows: 1. Exam Questions: The passing score for the motor vehicle driver's license subject four exam is 90 out of 100. The exam consists of 50 questions, each worth two points, with a total duration of 45 minutes. During the exam, if you answer at least 45 questions correctly, you will pass. If you make six mistakes, you will be required to leave the examination room immediately, resulting in a failed attempt. 2. Exam Opportunities: On the day of the subject four exam, you have two attempts. If you fail the first attempt, you must exit the examination room immediately and wait until the current session ends. You will then need to re-verify your identity and take the exam again. If you pass the second attempt, you can proceed to receive your motor vehicle driver's license.
17
1
Share

What Causes the Large Gap in the Window Trim of the New Mondeo?

Loose regulator screws, damaged window regulator, or damaged motor gear can cause a large gap in the window trim of the New Mondeo. Loose Regulator Screws: Inspect the regulator of the glass door. Frequent opening and closing of the glass door can cause the regulator screws to loosen over time. Damaged Window Regulator: If the window regulator is worn or damaged, the inability to manually operate the window indicates a faulty regulator. Damaged Motor Gear: For electronically controlled glass doors, damaged motor gears or poor circuit contact can prevent the door from closing tightly, resulting in an increased gap. Solutions for the Large Gap in the New Mondeo Window Trim: Tighten the screws if they are loose, replace the window regulator if it is damaged, and repair or replace the motor gear if it is faulty. Correct Method for Installing Window Trim: Clean the installation area with automotive cleaner or alcohol. After determining the correct position, peel back about 3 cm of the 3M adhesive at both ends of the trim. Avoid touching the adhesive surface with fingers. Align the trim and slowly peel off the red adhesive strips on both sides. Ensure the trim is firmly attached by pressing it down firmly with a towel.
12
0
Share

Should You Warm Up the Car in Place When Starting a Cold Engine in the Morning?

You should warm up the car in place when starting a cold engine in the morning. If it's winter, the temperature is very low, and the vehicle has been parked overnight, the viscosity of the engine oil and other fluids increases. If you start driving immediately with a cold engine, it can cause significant wear and tear on the vehicle, accelerate engine wear, and directly impact the vehicle's lifespan. Methods for warming up the vehicle: For cars with a manual choke, you can pull out the choke and gradually push it back in as the engine temperature rises, until the water temperature normalizes before driving. For fuel-injected or automatic choke carburetor engines, the idle speed is higher when starting a cold engine in winter, typically around 1200 RPM. At this time, the engine oil has poor fluidity and lubrication effectiveness, so it's not advisable to drive at high speeds or under heavy loads. Precautions for starting the vehicle in winter: Before starting the vehicle in winter, you should first inspect the surface of the vehicle around it to check for any ice formation; when officially starting the vehicle, let the engine run for a while before turning on electrical devices like the headlights and radio to avoid overloading the vehicle; after starting the vehicle, open the windows slightly to prevent fogging on the glass due to temperature differences.
16
2
Share

What Causes the Car Not to Start and the Brake Pedal to Be Hard to Press?

The reasons why the car won't start and the brake pedal is hard to press are: 1. The owner stepped on the brake several times after turning off the engine, causing the vacuum in the brake booster pump to disappear; 2. The booster pump is not working when the engine is off. In this case, try to restart the engine and press the brake pedal firmly. After starting, it should return to normal. If the above methods fail to restore normal operation, find a nearby repair shop to clear the fault before continuing to drive. When driving at low speed and encountering an emergency ahead, you can perform emergency braking by stepping on the brake pedal firmly. However, this should not be done at high speeds to avoid vehicle skidding or rollover.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.