Is there an age limit for obtaining a C1 driver's license?

1 Answers
XavierDella
07/30/25 5:45am
There is an age limit for obtaining a C1 driver's license. The minimum age requirement for a C1 driver's license is 18 years old, and there is no upper age limit. However, applicants aged 70 and above must pass tests on memory, judgment, and reaction abilities. Physical examination requirements: Motor vehicle drivers aged 70 and above (including 70 years old) must undergo an annual physical examination, while those under 70 years old are not required to do so. Permitted vehicle types: The C1 driver's license allows the holder to drive small and micro passenger vehicles, light and micro cargo vehicles, as well as light, small, and micro special-purpose vehicles. Small passenger vehicles must have a seating capacity of 9 or fewer people. Vehicles that cannot be driven with a C1 license: large buses, tractors, urban buses, medium-sized buses, large trucks, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, light motorcycles, wheeled self-propelled machinery, trolleybuses, and trams. Additionally, a C1 license does not permit driving vehicles with more than 9 seats or trucks with a total length exceeding 6 meters.
Was this review help?
10
0
Share
More Forum Discussions

How to reset the tire pressure warning on a BMW 3 Series?

If the tire pressure has been adjusted to the standard value, press and hold the button at the lower left corner of the instrument panel, slide the button on the lower left side of the steering wheel to the tire pressure setting, and then press the BC button next to it to reset the tire pressure warning. More details about the BMW 3 Series are as follows: 1. The BMW 3 Series is a new generation of sedan products from the BMW Group, with a body weight of 1465 kg, a straight 4-cylinder gasoline engine, and dimensions of 4.734 meters in length, 1.811 meters in width, and 1.455 meters in height. 2. The BMW 3 Series has once again set new standards for its class, with its aesthetic design, engineering design, high-tech features, as well as luxury comfort and safety aspects representing standardized craftsmanship.
2
4
Share

How to Switch Driving Modes in Volkswagen Lamando?

In the Volkswagen Lamando while driving, locate the button on the left side of the gear lever to switch driving modes. Eco Mode: The vehicle's computer controls the fuel injection volume, and the transmission control module manages the shifting logic, enabling the car to operate in the most economical mode. During driving, it comprehensively evaluates and analyzes factors affecting fuel consumption, such as automatic transmission gear, engine speed, vehicle speed, braking, and transmission oil temperature. The ECU control unit calculates the optimal fuel quantity to supply the engine, effectively reducing fuel consumption compared to normal driving mode. Normal Mode: Designed to maintain consistent power while achieving better fuel economy, normal mode offers the most balanced throttle response, providing simpler and more comfortable handling, making it easy to use. Sport Mode: When activated, the electronic control unit increases the engine speed, ensuring the vehicle maintains sufficient torque for quick acceleration and deceleration, fully showcasing the car's performance.
8
3
Share

How to Determine if an ABS Sensor is Good or Bad?

Methods to determine the condition of an ABS sensor: 1. Use a fault diagnostic tool to read the fault codes. If there is an issue with the sensor, the ABS computer will display a fault code, and the warning light on the dashboard will illuminate. 2. Measure the resistance of the ABS sensor with a multimeter. The resistance should be between 1000 and 1300 ohms. If it falls outside this range, it indicates a problem with the ABS sensor. Below is some relevant information about ABS sensors: 1. ABS sensors are used in the ABS systems of motor vehicles and serve to monitor vehicle speed. 2. ABS sensors interact with a toothed ring that rotates synchronously with the wheel, generating a set of quasi-sinusoidal alternating current signals. The frequency and amplitude of these signals are related to the wheel speed. This output signal is transmitted to the ABS electronic control unit (ECU), enabling real-time monitoring of the wheel speed.
9
0
Share

What Causes the Car Body to Still Shake After Replacing Spark Plugs?

Generally, the following issues may cause this: Damaging or partially breaking the ignition wires when removing the spark plugs, resulting in abnormal ignition; Incorrect installation of spark plugs, such as not tightening them properly (threads not aligned) or ignition wires not fully inserted; Ignition wires not corresponding to the correct cylinders. Symptoms of Damaged Spark Plugs in a Car: Damaged spark plugs may lead to the following issues: difficulty starting the engine, reduced power, excessive exhaust emissions, and increased fuel consumption. Effects of Damaged Spark Plugs: If spark plugs are damaged, it can directly cause problems such as leakage in the vehicle's ignition system, increased fuel consumption, and decreased power. The most significant issue is difficulty in ignition, affecting the normal operation of the vehicle. Severe erosion of spark plugs, such as scarring at the top, damage, or melted electrodes, indicates that the spark plugs are ruined and should be replaced.
18
0
Share

How to remove the spark plugs of Teana?

The method for removing the spark plugs of Teana: First, you need to remove the intake manifold of the Teana, then remove the ignition coils, and finally use a 16mm hexagonal socket to remove the spark plugs. The Teana uses NGK platinum spark plugs, which generally need to be replaced every 40,000 to 60,000 kilometers. The Teana is a flagship mid-to-high-end luxury sedan under NISSAN, with a body length, width, and height of 4891mm, 1830mm, and 1490mm respectively, and a wheelbase of 2775mm. The corners of the Teana's headlights are exceptionally sharp, and the arc of the integrated body bumper rises from both sides to the outer edges of the headlights, then naturally extends from the outermost corners of the headlights to form a smooth waistline that runs through the entire body. Paired with the rounded arc of the roof, the design is natural, smooth, and dynamic, exuding a very stylish appearance.
3
1
Share

Where is Yangtze River Leapmotor produced?

Yangtze River Leapmotor's manufacturing plant is located in Jinhua, Zhejiang Province. Below are the specific details about Leapmotor: 1. Leapmotor is an innovative intelligent electric vehicle brand, with business scope covering intelligent EV design, R&D and manufacturing, motor and electronic control, battery system development, intelligent driving, and vehicle networking solutions. It has planned three vehicle platforms: the S platform, T platform, and C platform. 2. The Leapmotor S01 from the S platform. The Leapmotor S01 is positioned as an intelligent pure electric coupe, featuring a design inspired by traditional two-door sports cars, with a 0-100 km/h acceleration of 6.9 seconds and a combined driving range of only 305 km and 380 km. 3. The Leapmotor T03 from the T platform. The Leapmotor T03 is a compact car equipped with a large central control screen, panoramic sunroof, and intelligent driving assistance system. 4. The c-more from the C platform. The c-more is positioned as a crossover pure electric SUV model with a combined driving range exceeding 500 km.
8
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.