Is There an Age Limit for Driver's License Training?

What is the fixed point on the slope in Subject 2?

When practicing fixed-point parking, first align the car's bumper perpendicularly with the parking line. Sit in the car and look at the left side of the parking line, ensuring your eyes and the parking line form a straight line. Then, find a point on the car door that aligns with this straight line (three-point alignment) and remember this point. During the fixed-point parking test, when your eyes, the point on the car door, and the left side of the parking line form a straight line (three-point alignment), stop immediately. At this moment, the bumper will be perfectly perpendicular to the parking line. Subject 2 varies in test content depending on the vehicle type, as follows: 1. Basic test items: pole test, slope fixed-point parking and starting, parallel parking, single-plank bridge crossing, curve driving, right-angle turning, speed-limited passing through a narrow gate, continuous obstacle crossing, hundred-meter gear shifting, and bumpy road driving. 2. Test items for permitted driving types: large buses, tractors, city buses, medium-sized buses, and large trucks must include no fewer than 6 test items.

6

5

Share

What is the actual fuel consumption of the 10th-generation Accord 260?

The actual fuel consumption of the 10th-generation Accord 260 is 6 liters per 100 kilometers. Relevant information about car fuel consumption is as follows: 1. Constant-speed fuel consumption: This refers to the fuel economy indicator when the car is driving at a constant speed on good road conditions. 2. Road cycle fuel consumption: This is the fuel economy indicator measured when the car drives in repeated cycles according to specified speeds and time norms on the road, also known as multi-condition road cycle fuel consumption. Relevant information about the 10th-generation Accord 260 is as follows: 1. Body dimensions: Length 4893 mm, width 1862 mm, height 1449 mm, wheelbase 2830 mm. 2. Powertrain: Equipped with a 1.5-liter 194-horsepower four-cylinder turbocharged engine, paired with a CVT continuously variable transmission.

9

1

Share

What are the reasons for the Tiida's brake being hard to press and unable to start?

Regarding the reasons and solutions for the Tiida's brake being hard to press and unable to start, the details are as follows: 1. Incorrect braking operation: It may be due to repeatedly pressing the brake several times after the engine is turned off, causing the vacuum in the brake booster pump to disappear. Without the assistance of the booster, it becomes difficult to press the brake pedal. Solution: Try restarting the engine and press the brake pedal firmly. Once the engine starts, the brake should return to normal. 2. Component failure: There may be air leakage in the vehicle's brake booster pump or a component failure. Due to the loss of booster assistance, the brake pedal will feel very hard and require significant effort to press. Solution: If pressing the brake multiple times does not restore normal function, it is necessary to visit a repair shop to have the fault cleared and resolved before continuing to drive.

5

Share

Can I still drive with a tire pressure of 150?

Tire pressure of 150 should not be driven on. When the tire pressure is low, the contact area with the ground increases, and the rolling heat generated is much higher than at standard pressure. This can cause deformation and accelerated fatigue of the internal cord layers, leading to structural damage in severe cases, ultimately resulting in a tire blowout. Below are factors to consider when adjusting tire pressure: 1. Seasonal factors: In winter, it is advisable to slightly increase the tire pressure by about 0.2 bar based on the standard tire pressure. In summer, follow the lower limit of the standard tire pressure. If the car is parked outdoors in summer, the pressure can generally be about 0.1 bar lower than the standard to avoid blowouts due to high temperatures. 2. Road conditions: On roads with significant bumps, it is appropriate to lower the tire pressure by 0.1-0.2 bar from the standard. For smoother roads, this can be ignored. For long-distance highway driving, the tire pressure should not be too low; it is advisable to slightly increase the pressure by about 0.2 bar from the standard lower limit.

16

0

Share

Is a Tire Pressure of 140 kPa Due to a Puncture?

If you find that your vehicle's tire pressure has dropped to 140 kPa, it is very likely that the tire has been punctured. In such cases, it is best not to continue driving. You should inflate the tire as soon as possible or replace it with a spare tire, and promptly visit the nearest tire repair shop for servicing. Hazards of Overinflated or Underinflated Tires: For tires, the pressure should neither be too high nor too low. Overinflated tires reduce the contact area with the ground, leading to poor traction, which affects the vehicle's handling and driving stability. Underinflated tires can cause wave-like deformation during high-speed driving, shortening the tire's lifespan and increasing the risk of a blowout. Introduction to Standard Tire Pressure: According to the international GBT2978-2008 standard, the recommended tire pressures are as follows: Standard tires: 2.4-2.5 bar; Reinforced tires: 2.8-2.9 bar; Maximum pressure: should not exceed 3.5 bar.

10

5

Share

Does the Passat have a particulate filter?

Currently, the 2.0T high and low power versions of the Passat are not equipped with particulate filters, while other models do have them. The particulate filter can reduce the particles in engine exhaust emissions, recycle them, decrease vehicle exhaust emissions, enhance the environmental friendliness of the vehicle, and reduce atmospheric pollution. To check whether a vehicle is equipped with a particulate filter, you can use the following three methods: Check the and to see if there is a particulate filter function. Additionally, you can carefully examine the fault codes in the manual to see if there is a "particulate filter" warning light indicator. Check the label on the oil filler cap. If the oil filler cap clearly indicates 0W-20 grade oil, it means the vehicle is equipped with a particulate filter. Look behind the three-way catalytic converter to see if there is a cylindrical section on the exhaust pipe. If there is, that is the particulate filter. Location of the particulate filter: The particulate filter is located behind the three-way catalytic converter and in front of the muffler, surrounded by the front and rear oxygen sensors.

18

1

Share

Is There an Age Limit for Driver's License Training?

What is the fixed point on the slope in Subject 2?

What is the actual fuel consumption of the 10th-generation Accord 260?

What are the reasons for the Tiida's brake being hard to press and unable to start?

Can I still drive with a tire pressure of 150?

Is a Tire Pressure of 140 kPa Due to a Puncture?

Does the Passat have a particulate filter?

How to Remove the Low Beam Bulb of Mistra?

Why is the 2014 LaCrosse priced so low?

What does it mean when the Volkswagen Jetta coolant temperature gauge light comes on?

How to Set Up Auto-Locking for the Escort?