Is there a way to solve the problem of the Outlander's seats being too hard?

How to Disassemble a Tiguan Key?

The method to disassemble a Tiguan key is as follows: First, pull out the mechanical key from the car key. Then, you will see an opening mark at the bottom of the key. Use a small screwdriver to align with the opening mark at the bottom and turn it 90 degrees. Next, rotate the outer shell of the key to complete the disassembly. The four positions of the car key are: LOCK position, ACC position, ON position, and START position. The dimensions of the Tiguan are 4506mm in length, 1809mm in width, and 1685mm in height, with a wheelbase of 2684mm. The vehicle comes standard with features such as EDS electronic differential lock, EPB electronic parking brake, auto-hold function, and TPR tire pressure monitoring system.

18

0

Share

How to Charge a Dead Battery?

Methods to charge a dead battery include: 1. Push-start method, which must not be used for automatic transmission vehicles; 2. Use the battery jump-start method for charging; 3. If another vehicle is available, the tow-start method can be used, starting slowly. A car battery, also known as a storage battery, works by converting chemical energy into electrical energy. Battery maintenance methods are: 1. Avoid parking the car in an open parking lot for extended periods; 2. In winter, car engines are harder to start, so each start attempt should not exceed 5 seconds, with intervals of at least 15 seconds between attempts; 3. The car battery should be charged regularly, as prolonged disuse will lead to gradual self-discharge.

11

2

Share

What are the reasons for the unresponsive car navigation screen?

The reasons for the unresponsive car navigation screen are: 1. The screen has reached the end of its lifespan; 2. There is an issue with the resistive touch screen; 3. The film applied on the screen has caused adhesive to stick to the screen surface; 4. The screen itself has malfunctioned, which could be due to touch screen damage, loose connections, wiring issues, etc. Solutions include using dishwashing liquid or essential balm to clean the adhesive residue on the screen. The built-in GPS antenna in the car navigation system receives data signals from at least 3 of the 24 GPS satellites orbiting the Earth. By combining this with the electronic map stored in the car navigation device, the system matches the position coordinates determined by the GPS satellite signals to pinpoint the car's exact location on the electronic map.

12

0

Share

How to Determine if the Tensioner Pulley is Faulty?

Tensioner pulley damage manifests as follows: 1. Abnormal noises occur at around 1400-1500 RPM. The noise becomes more pronounced under high-power consumption conditions such as air conditioning operation, uphill driving, or turning. 2. Loud noise during rapid acceleration, resonance phenomena, and insufficient power. 3. If the tensioner pulley fails while driving, the vehicle may experience loss of braking and steering control. 4. Engine timing misalignment, ignition and valve timing disorder, engine shaking, and difficulty starting. Additional information about tensioner pulleys: 1. The tensioner pulley can automatically adjust the tension according to the belt's tightness, ensuring stable, safe, and reliable operation of the transmission system. 2. It helps the belt run more smoothly with reduced noise and prevents slippage. 3. The tensioner pulley is typically replaced together with the timing belt.

18

2

Share

What to Pay Attention to After Buying a Car

After buying a car, pay attention to: 1. Body paint: Check the flatness of the body panels and bumpers; there should be no abnormal dents or bulges. Also, carefully inspect the paintwork on all parts, especially areas that are prone to scratches during transportation. 2. Car interior: The door windows should move up and down smoothly, reaching the top when raised and the bottom when lowered. The front seats should move freely back and forth with multiple fixed positions, allowing passengers to choose a comfortable seating position. 3. Trunk space: Ensure it is clean, the inner lining is flat, the opening mechanism works smoothly, and the locking mechanism is reliable. 4. Open the engine hood and check for oil stains or dust on the engine and its attachments, especially around the joint between the cylinder head and cylinder block, the oil filter interface, the air conditioning compressor, the power steering pump, and the drive shaft for any leaks.

5

1

Share

How to Replace the Low Beam Headlight on Roewe 350?

The method to replace the low beam headlight on the Roewe 350 is as follows: Turn the left lever once to activate the parking lights, and twice for the low beam headlights; press down for the high beams; lift up for temporary high beams; the left and right turn signals are adjusted according to the direction. The low beam headlights are designed for close-range illumination, with a coverage range of 160 degrees and a distance of 30 to 40 meters. The dimensions of the Roewe 350 are 4521mm in length, 1788mm in width, and 1492mm in height, with a wheelbase of 2650mm. The vehicle is powered by a 1.5T engine, delivering a maximum power of 129 horsepower and a maximum torque of 210Nm, paired with either a 6-speed manual transmission or a 6-speed automatic transmission.

10

5

Share

Is there a way to solve the problem of the Outlander's seats being too hard?

How to Disassemble a Tiguan Key?

How to Charge a Dead Battery?

What are the reasons for the unresponsive car navigation screen?

How to Determine if the Tensioner Pulley is Faulty?

What to Pay Attention to After Buying a Car

How to Replace the Low Beam Headlight on Roewe 350?

What Causes Uneven Tire Wear on Small Cars?

Can Engine Cylinder Scoring Be Repaired?

What are the reasons for the steering wheel being off-center to the left?

Where are the door drainage outlets located on the eighth-generation Camry?