Is there a Thunder Edition for the BMW M4?

What is the normal discharge level for a car?

Different car brands have varying discharge currents. Vehicles with fewer electrical appliances tend to have lower discharge currents, while those with more electrical appliances exhibit higher discharge currents. After the engine is turned off, the car's sleep current typically ranges between 40 milliamperes and 80 milliamperes. Below are the daily power leakage of car batteries and methods for inspecting car discharge: Daily power leakage of car batteries: A car battery loses approximately 1% of its charge daily. If the battery remains connected to the car, it uses a minimum current (commonly referred to as "sleep" current) of about 80mA to maintain basic functions. If the car is equipped with an anti-theft alarm, additional power is consumed, generally resulting in a daily power loss of around 2% to 3%. Methods for inspecting car discharge: First, use a battery tester to check if the battery has aged. If the test results are normal and the battery discharge is due to human factors, simply recharge the battery. If the battery gradually depletes while the vehicle is in operation, first inspect the generator or charging system for any faults.

14

3

Share

What type of oil does the Changan Lingxuan use?

Changan Lingxuan uses 5W30 engine oil, which has strong lubrication capabilities and excellent low-temperature resistance, making it one of the commonly used oil types in the automotive market. If you wish to change the oil during later maintenance, you can choose from brands such as Shell or Castrol. The viscosity of engine oil changes with temperature, so special attention should be paid to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity—5W means it can withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, resulting in smoother cold starts for the car. The latter number represents the kinematic viscosity of the oil at 100°C. A higher value indicates better ability to maintain viscosity under high temperatures, which can also be understood as better lubrication performance under high-temperature conditions. The method for changing the oil in a Changan Lingxuan is as follows: Wait for the engine temperature to cool down, allowing the oil to flow back into the oil pan. Use a wrench to loosen the oil drain plug and place an oil pan underneath to catch the old oil until it stops flowing. Start the engine and let it run for 30 seconds to allow the oil in the main oil passage to drain out. Use a specialized wrench to remove the oil filter. Apply oil to the seal of the new oil filter and tighten it clockwise by hand. Add new oil through the engine valve cover filler port, typically filling about three-quarters of a standard oil container. Start the engine and let it run for 5 minutes, checking for any leaks around the oil drain plug or oil filter. If leaks are found, perform necessary repairs. After stopping the engine, pull out the dipstick to ensure the oil level is within the standard range.

3

0

Share

Why does an electric car make noise for no reason?

Electric cars may produce noise for no apparent reason due to the following factors: 1. Doors not properly closed: This includes not just the doors but also the engine hood or trunk. When any of these components are not securely shut, the car's alarm system may activate. If left unaddressed, the alarm will continue to sound until the car battery is drained or the door is properly closed. 2. High trigger sensitivity: Loud noises or vibrations can also trigger the car alarm. If the alarm is overly sensitive, there is a sensitivity adjustment button on the vibration sensor of the anti-theft alarm that allows for fine-tuning.

9

1

Share

What is the best position for the reversing mirror?

There is no precise position as it varies depending on the shape of the mirror. The optimal position should be determined based on the driver's seating position to find the most suitable location. Below are the general best positions for the reversing mirror: 1. Left rearview mirror: The small convex mirror is usually installed on the left half of the left rearview mirror. Since the left rearview mirror is primarily used for reversing or overtaking, and parking in China is mostly on the right side, the left rearview mirror is rarely used during parking. Therefore, the position of the small convex mirror should minimize blind spots while still allowing visibility of the rear wheel. 2. Right rearview mirror: The small convex mirror is typically installed at the lower left or lower right of the right rearview mirror.

4

Share

What to Bring for the Subject 1 Retake?

For the exam, you only need to bring your ID card. The admission ticket and other documents are handled by the driving school, which will distribute them during the exam. Electronic IDs cannot be used for the exam. If you don’t have an ID card, you can apply for a temporary ID, which holds the same validity as a regular ID card. The "Regulations on the Application and Use of Motor Vehicle Driver’s Licenses" clearly state that you can take the Subject 1 exam twice on the same day. If you fail the first attempt, you can retake it for free the second time. If you fail the second attempt, the Subject 1 exam will be terminated, and you can only reschedule after ten days. The Subject 1 exam consists of 100 questions, including single-choice and true/false questions, each worth 1 point, totaling 100 points. If you answer 11 questions incorrectly during the exam, the system will automatically submit the test and end the exam. The Subject 1 exam is computer-based and lasts 45 minutes. Subject 1 exam content includes: regulations on driver’s licenses and motor vehicle management; road traffic conditions and rules; traffic safety violations and penalties; regulations on traffic accident handling; basic knowledge of motor vehicles; local regulations; knowledge of braking systems and safety devices for large and medium-sized buses and trucks; specialized knowledge for wheeled self-propelled machinery, trams, and trolleybuses. Subject 1 exam precautions: Candidates should dress appropriately—no slippers allowed. Electronic devices and bags are prohibited in the exam hall. Bring your ID card and queue to enter the waiting area. Observe the instructions and procedures displayed on the screen, and store personal belongings in lockers before entering the exam hall. Upon entering the exam hall, the identity verification desk will assign you a seat. After finding your seat, begin the exam. Ensure the camera is aligned with you and follow exam discipline. If you fail the first attempt, you can retake it the same day. If you fail again, you must pay to reschedule. After the exam, queue to collect your score report and sign it. Unsigned reports are considered invalid. There is no limit to the number of times you can reschedule the Subject 1 exam. Each subject can be taken once, with one free retake if you fail. If you skip the retake or fail it, the exam is terminated, and you must reschedule. For Subject 2 and Subject 3, there are only five exam attempts. Subject 2 and Subject 3 exams can be rescheduled after ten days. If you fail the Subject 3 safety and civilized driving knowledge test, your previously passed road driving skills test results remain valid. The driving test consists of three subjects: Subject 1, Subject 2, and Subject 3. Subject 1 covers traffic safety laws, regulations, and related knowledge. Subject 2 is the field driving skills test. Subject 3 is divided into two parts: road driving skills and safety and civilized driving knowledge. The safety and civilized driving knowledge test is conducted after Subject 3, so it is commonly referred to as Subject 4. However, the official term (as per Ministry of Public Security Order No. 123) does not include "Subject 4."

2

Share

What are the three installation methods for child safety seats?

Below are the three installation methods for child safety seats: 1. ISOFIX fixation (European standard): Features two anchors at the base to prevent seat flipping during collisions (seats for 0-4-year-olds often come with support legs and other anti-flip devices). 2. LATCH fixation (American standard): Addresses the issue of ISOFIX lacking top fixation and, due to its non-rigid connection, has more lenient requirements for anchor point positions on vehicle seats. 3. Seat belt fixation: Uses the vehicle's seat belt for securing, making it universally compatible with any car equipped with seat belts worldwide. Many child safety seats sold domestically only support this fixation method.

1

0

Share

Is there a Thunder Edition for the BMW M4?

What is the normal discharge level for a car?

What type of oil does the Changan Lingxuan use?

Why does an electric car make noise for no reason?

What is the best position for the reversing mirror?

What to Bring for the Subject 1 Retake?

What are the three installation methods for child safety seats?

Can a B2 trainee drive on the highway?

Should New Cars Use Fuel Additives?

What are the automotive brands under Ford?

How to adjust the valves of a six-cylinder engine 1236710?