···
Log in / Register

Is There a Theory Test in Subject Three?

4 Answers
EmilyMarie
09/09/25 2:00am

There is a theory test in Subject Three. Characteristics of the theory test: The theory test is a common form of examination, typically divided into written tests and computer-based tests. A written test involves printing the questions on paper, and candidates fill in the answers on an answer sheet (or directly on the test paper). A computer-based test displays the questions on a computer screen, and candidates use a keyboard or mouse to answer. Content of Subject Three test: The road driving skills test for Subject Three generally includes preparation before driving, simulated light test, starting, driving straight, changing lanes, pulling over, driving straight through intersections, turning left at intersections, turning right at intersections, passing pedestrian crossings, passing school zones, passing bus stops, meeting other vehicles, etc.

Was this review help?
10
0
Share
DeJulian
09/20/25 7:05am

I remember when I was taking my driver's license test, the third subject referred to the road test section, which was purely practical with no theoretical exam. During the third subject test, you would get in the car and perform operations, with the examiner sitting in the passenger seat observing how you drove—skills like starting, turning, and parking were all tested in real-time on the road, with no written or question-answering involved. The theoretical exam was mainly taken first in the first subject, where you had to take a written test on traffic rules and laws and regulations. Only after mastering the basics could you apply to take the third subject. In some places, after passing the third subject, there was also a fourth subject test on safe and civilized driving knowledge, which was theoretical but a separate subject. When I was preparing, I focused on practicing road reaction skills and safety awareness. There really was no written test in the third subject, but practicing simulated test routes beforehand helped a lot. Overall, the driver's license test is designed in stages for safety—theory is theory, and practical skills are practical skills.

Was this review help?
9
1
Share
Expand All
DeBarrett
11/03/25 7:28am

I often help friends with their driver's license inquiries. The third subject (Subject 3) indeed has no theoretical test elements; it is purely a practical driving skills test, without any writing or answering questions involved. During the test, candidates only need to focus on driving skills such as changing lanes and checking blind spots, while the examiner scores based on their on-site performance. In the entire driver's license process, theoretical content is divided: Subject 1 tests basic knowledge of laws and regulations, and Subject 4 (if applicable) tests safe driving theory. Both are independent of the practical driving segment in Subject 3. I recommend that friends who want to take the test familiarize themselves in advance with the test site layout and practical aspects of traffic rules, such as traffic light usage or right-of-way judgment. Although these are not part of the Subject 3 test content, they can help stabilize performance. The key is to practice more in the car to build confidence. Subject 3 has no theoretical pressure, but requires full concentration on safe operations.

Was this review help?
10
5
Share
Expand All
Pamela
12/17/25 7:28am

My child recently passed the driving test. When asked if there was a theoretical exam in Subject 3, the instructor's answer was that there was no written test at all. Subject 3 is entirely practical driving on the road, where the child drives on a designated route under the supervision of an examiner to assess skill operations, such as making U-turns or brake control—these are the hard skills. The theoretical part is covered in Subject 1's written test on rule knowledge and possibly Subject 4's questions on civilized driving. During the Subject 3 test, candidates only need to focus on driving without distractions, and the scoring criteria are based on actual performance. As a parent, I believe safety is the most important thing. It's good that the practical test doesn't complicate things with theory, but before the test, my child reviewed Subject 1 notes to reinforce basic concepts.

Was this review help?
15
0
Share
Expand All
More Forum Discussions

What does 'hybrid version' mean for sedans?

Hybrid version is the abbreviation for the hybrid power version of a vehicle. Hybrid power refers to the combination of fuel and electricity, meaning a mix of traditional fuel and electric power. Hybrid vehicles offer high fuel efficiency and superior driving performance. Currently, there are mainly three types of hybrid vehicles: 1. The first type: 'Parallel hybrid,' where the engine serves as the main power source, and the electric motor acts as an auxiliary. In this setup, the vehicle primarily relies on the engine for driving, while the electric motor provides additional power during startup, acceleration, or other situations where the engine's fuel consumption is high, thereby reducing the engine's fuel usage. 2. The second type: 'Series-parallel hybrid,' where the vehicle is driven solely by the electric motor at low speeds, and the engine and electric motor work together at higher speeds. During startup and low-speed driving, only the electric motor is used, while at higher speeds, both the engine and electric motor efficiently share the power load. 3. The third type: 'Series hybrid,' which is essentially an electric vehicle driven solely by the electric motor. The engine only serves as a power source, and the vehicle relies entirely on the electric motor for propulsion. Although the drive system consists solely of the electric motor, since a fuel engine is still installed, it is also considered a type of hybrid vehicle.
13
3
Share

What Causes the Charging Battery to Overheat?

Reasons and solutions for overheating of electric vehicle batteries during charging: 1. Battery issues: Aging of the battery, increased internal resistance, dried-up electrolyte, or internal short circuits can cause overheating. Additionally, the formation of sulfate crystals and sediment sticking to the lead plates during the charge-discharge process can increase battery resistance and lead to overheating. Solution: These issues can be addressed through technical means such as adding water, desulfation, and depolarization. If the battery overheats due to short circuits or broken plates, it is best to replace the battery. 2. Charger issues: Most chargers lack pulse functionality and negative pulse depolarization features. Such chargers often fail to maintain a constant voltage in the later stages of charging, causing the battery voltage to exceed permissible limits, which results in excessive gas generation, water loss, and overheating. Solution: It is essential to choose the correct charger for the electric vehicle. The charging process is an electrochemical reaction, and slight heating during this process is normal. However, if the heating is abnormal and the battery is in good condition, the issue likely lies with the charger.
15
4
Share

What Causes the Sudden Loud Noise from the Wiper Motor?

The sudden loud noise from the wiper motor may be due to an increased friction coefficient between the wiper and the glass surface, or it could indicate a malfunction in the wiper motor. Additional details are as follows: 1. Introduction: The wiper is an important accessory installed on the windshield, designed to remove rain, snow, and dust that obstruct visibility. Thus, it plays a crucial role in driving safety. 2. Principle: The motor in an electric wiper drives the output shaft via a worm gear on the armature shaft, which then drives the output gear through an idler and idler shaft. The output arm, connected to the wiper linkage, is then operated by the output shaft. When the motor rotates, the output arm and linkage are driven to move back and forth.
3
5
Share

What Type of Airflow to Use for Defogging Windows on Rainy Days?

When defogging car windows on rainy days, using the hot air conditioning is the most effective method. Additional information is as follows: 1. Introduction: The car air conditioning system is a device designed to cool, heat, ventilate, and purify the air inside the vehicle compartment. It provides a comfortable environment for passengers, reduces driver fatigue, and enhances driving safety. 2. Configuration: The arrangement of air conditioning systems varies depending on the type. Passenger cars commonly use an integrated heating and cooling air conditioning system. This configuration typically combines the evaporator, heater core, centrifugal blower, and control mechanism into a single unit, known as the air conditioning assembly.
6
0
Share

Where are the long and short wiper blades positioned?

Generally, one is long and the other is short, with the long one on the driver's side and the short one on the passenger side. Additional information is as follows: 1. Introduction: The wiper is an important accessory installed on the windshield, and its function is to remove rain, snow, and dust that obstruct the view on the windshield. Therefore, it plays a crucial role in driving safety. 2. Principle: The motor on the electric wiper drives the output shaft through the worm gear on the armature shaft and drives the output gear through the idler gear and idler shaft. The output arm connected to the wiper linkage is then manipulated by the output shaft. When the motor rotates, the output arm and linkage are driven to move back and forth.
15
5
Share

Does Wiper Noise Require Windshield Replacement?

Wiper noise does not necessitate windshield replacement; the cause of the noise should be investigated. Additional information is as follows: 1. Wiper: The wiper is an important accessory installed on the windshield, designed to remove rain, snow, and dust that obstruct the driver's view. Thus, it plays a crucial role in driving safety. 2. Automobile Windshield: Modern car windshields are typically made as a single-piece, large-curved surface with specific curvatures on all sides. This curved glass is a product with highly demanding technical requirements, both in terms of the manufacturing process and assembly fit, as it involves considerations such as vehicle model, strength, insulation, and installation.
8
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.