Is There a Subject 4 for Automatic Transmission?

Does a Vehicle's Failed Inspection Affect the Transfer of Another Vehicle?

Vehicle inspection failure does not affect the transfer of another vehicle. A failed inspection can be rectified with a supplementary inspection, but penalties will be imposed. Failure to conduct a safety technical inspection within the specified period will result in a fine and a deduction of 3 points from the driver's license. For the annual inspection, bring the vehicle registration certificate, a copy of the compulsory traffic insurance policy, and ensure all traffic violations have been settled; the inspection can then be conducted at the local vehicle management office. Below are precautions for vehicles that have not undergone annual inspection: 1. Accident Liability: For any traffic accidents caused by a vehicle that has not undergone the annual inspection on time, the party involved will bear full or primary responsibility, and the insurance company will not be liable. This is because the insurance policy specifies that vehicles with expired inspections are among those not covered for claims. 2. Mandatory Scrapping: According to the 'Regulations on the Mandatory Scrapping Standards for Motor Vehicles,' if a vehicle fails to obtain a valid inspection certification mark for three consecutive inspection cycles after the expiration of its inspection validity period, it will be mandatorily scrapped.

5

3

Share

What are the reasons for the Dongfeng Lingzhi frequently experiencing sudden overheating?

The reasons for the Dongfeng Lingzhi frequently experiencing sudden overheating are as follows: Insufficient coolant: Insufficient engine coolant. Coolant leakage or a lack of coolant can cause the engine water temperature to rise. In this case, the coolant level should be checked. If it is insufficient, first add coolant to the appropriate level, then check the level again after a few days to see if it has dropped significantly. If it has, the source of the leakage should be identified. Component failure: Water pump failure, worn or loose drive belt. The thermostat main valve cannot open or opens too late. The louver cannot fully open. Dirty, damaged, or clogged radiator cooling fins or tubes. Scale buildup or blockage in the water jacket and distribution pipes. The fan clutch engages too late, or the cooling fan does not work, excessive resistance to fan rotation, incorrectly installed fan blades, damaged blades, etc.

17

3

Share

What are the regulations for Dongfeng Honda's first maintenance?

Dongfeng Honda's first maintenance must be carried out within 5,000 kilometers or six months of the car's operation, whichever comes first. Generally, the most suitable mileage for the first maintenance is between 4,000 and 5,000 kilometers. However, if the car has been in use for more than six months, the 4S dealership will not perform the first maintenance. Documents required for the first maintenance: The documents needed for the first maintenance include: the three-guarantee maintenance manual, the vehicle's driving license, and the owner's ID card. Before going for the first maintenance, it's advisable to make a phone appointment in advance to avoid long waiting times. Also, bring some cash for any unexpected needs. Early first maintenance for stock vehicles: For vehicles with an early production date, also known as stock vehicles, the first maintenance should be appropriately advanced. This is because long-term stationary vehicles suffer from severe oil oxidation. When the engine is restarted, dry or semi-dry friction occurs between the cylinder and the piston, accelerating the wear of parts and significantly increasing the starting resistance.

3

0

Share

What are the exhaust emission standards for diesel vehicles?

Carbon monoxide must not exceed 2.2g/km; hydrocarbons must not exceed 1.13g/km; particulate matter standards for diesel vehicles must not exceed 0.18g/km; durability requirements are set at 50,000 km. The main pollutants emitted by vehicles include HC (hydrocarbons), NOx (nitrogen oxides), CO (carbon monoxide), and PM (particulate matter). Below are the requirements of the China VI emission standards: 1. China VI standards: The China VI standards are extremely high, ranking among the strictest vehicle emission standards globally. Compared to the China V emission regulations, China VI adds limits for nitrous oxide and particulate matter particle numbers, and requires a 50% reduction in carbon monoxide content during cold start conditions, a 30% reduction in hydrocarbon content, and a 30% reduction in carbon monoxide content. 2. Post-implementation of China VI standards, China V vehicles can still be driven: Even after the implementation of China VI standards, China V vehicles can still be driven on the road, though registration and licensing may become more difficult. For those China V vehicles in stock, they will definitely be sold at discounted prices, and the closer the implementation date of China VI, the cheaper they will become.

1

4

Share

Is There Any Relationship Between the Hongqi HS5 and the Audi Q5?

There is no relationship between the Hongqi HS5 and the Audi Q5. Below are the relevant details about the Hongqi HS5 and the Audi Q5: 1. Brand Differences: The Audi Q5L is produced by FAW-Volkswagen Audi, while the Hongqi HS5 is produced by FAW Hongqi. Both belong to the FAW Group, with the only difference being that one is a joint-venture brand and the other is an independent brand. 2. Engine Differences: Both vehicles are midsize SUVs, equipped with a 2.0T turbocharged engine. However, the Hongqi HS5 has significantly higher power output compared to the Audi Q5L. 3. Configuration: Both models meet the standards of luxury midsize SUVs in terms of configuration. The Hongqi HS5 has slightly higher fuel consumption, a smaller center console storage space, and stiffer suspension damping, making it less comfortable on uneven roads. The Audi Q5L has replaced the original 8AT transmission with a 7-speed dual-clutch transmission.

11

5

Share

How to Deal with Excessive Car Exhaust Emissions?

Methods for handling excessive car exhaust emissions are as follows: Clean or Replace the Three-Way Catalytic Converter: The three-way catalytic converter is a major factor affecting excessive car exhaust emissions. In many cases, excessive emissions are caused by issues with the three-way catalytic converter. The function of the three-way catalytic converter is to oxidize CH and CO into carbon dioxide and H2O. If the three-way catalytic converter malfunctions, passing the exhaust emission test becomes difficult. Common issues with the catalytic converter include carbon buildup, clogging, poisoning, or failure. Cleaning the catalytic converter can resolve some problems, but if it is poisoned or damaged, timely replacement is necessary. Clean or Replace Spark Plugs: Faulty spark plugs can also lead to excessive exhaust emissions. The most common issue with spark plugs is carbon buildup, which can be cleaned using sandpaper or a cleaning agent. If the spark plugs fail due to erosion or reaching the end of their lifespan, they should be replaced immediately to avoid affecting normal vehicle operation. Check the Oxygen Sensor: When the car's oxygen sensor is clogged with carbon or malfunctions, it can affect the ECU's ability to properly regulate the air-fuel mixture and may also impact the performance of the three-way catalytic converter. It is recommended to clean the oxygen sensor and the catalytic converter simultaneously. Perform a Deep Engine Clean: After detecting excessive exhaust emissions, a thorough engine cleaning—including the throttle body, fuel system, intake manifold, and fuel injectors—can help restore the engine to normal operation. Methods for Detecting Excessive Car Exhaust Emissions: Radar Detection: Directly determines whether emissions exceed standards by analyzing the detection zone on the radar. Remote Sensing Detection: Uses remote sensing devices to measure emissions, with results displayed on the equipment screen. Electronic Capture: Utilizes traffic cameras to capture data. Manual Inspection: Conducted by traffic police during roadside checks, offering flexibility. Preventive Measures Against Excessive Emissions: Regularly maintain vehicle components, especially fuel injectors, oxygen sensors, and the three-way catalytic converter. Use high-quality fuel. Adhere to scheduled maintenance and maintain good driving habits during daily use.

5

4

Share

Is There a Subject 4 for Automatic Transmission?

Does a Vehicle's Failed Inspection Affect the Transfer of Another Vehicle?

What are the reasons for the Dongfeng Lingzhi frequently experiencing sudden overheating?

What are the regulations for Dongfeng Honda's first maintenance?

What are the exhaust emission standards for diesel vehicles?

Is There Any Relationship Between the Hongqi HS5 and the Audi Q5?

How to Deal with Excessive Car Exhaust Emissions?

What kind of engine oil is suitable for Changan CS55?

Where to Repair a Broken Car Display Screen?

How Often Should a Vehicle Be Inspected After Six Years?

Can Diesel Vehicles Enter the City?