Is there a sport version of the BMW X2?

1 Answers
DelArthur
07/29/25 1:25pm
There is no sport version of the BMW X2. Here is the relevant information: 1. The BMW X2 is a compact SUV with an attractive exterior design. It is equipped with two engines: a 1.5-liter turbocharged engine and a 2.0-liter turbocharged engine. 2. The 1.5-liter turbocharged engine, codenamed B38A15A, has a maximum power output of 103 kW and a maximum torque of 220 Nm. The maximum power is achieved at 4,600 to 6,500 rpm, and the maximum torque is available from 1,480 to 4,200 rpm. This engine features direct fuel injection and uses an aluminum cylinder head and block. It is paired with a 7-speed dual-clutch transmission. 3. The 2.0-liter turbocharged engine, codenamed B48A20A, delivers a maximum power of 141 kW and a maximum torque of 280 Nm. The maximum power is achieved at 5,000 to 6,000 rpm, and the maximum torque is available from 1,350 to 4,600 rpm. This engine also features direct fuel injection and uses an aluminum cylinder head and block. It is paired with a 7-speed dual-clutch transmission.
Was this review help?
18
0
Share
More Forum Discussions

Is It Normal for Water Droplets to Appear at Car Air Conditioning Vents?

It is normal for water droplets to appear at car air conditioning vents. Here are the relevant explanations: 1. "Condensation water" may form at air conditioning vents: The dew point (or frost point) temperature refers to the temperature at which air, under constant water vapor content and pressure, cools to saturation. This is the temperature at which water vapor in the air turns into dew droplets. 2. Higher temperatures: In hot summer regions when indoor humidity is high, the dew point temperature of the air is relatively high. When the supply air temperature is lower than the dew point temperature of the indoor air, condensation and dripping of condensation water may occur at the louvered vents of the air conditioning, especially during the initial period after startup. This is a normal phenomenon.
2
2
Share

Do I Need to Empty the Trunk for Vehicle Inspection?

Vehicle inspection at the testing line does not require emptying the trunk. Here are the relevant details: 1. Vehicle annual inspection can be done three months in advance: According to the "Motor Vehicle Registration Regulations," the owner of a motor vehicle can apply for an inspection compliance mark at the vehicle management office of the registration location up to three months before the expiration of the vehicle inspection validity period. Bring your driver's license, ID card, vehicle registration certificate, and the current valid compulsory traffic insurance policy. 2. Exempt vehicles: If the motor vehicle falls within the exemption range, prepare the above materials and go to the nearest vehicle management office to handle the annual inspection. Staff will input the corresponding motor vehicle and compulsory traffic insurance information into the system, and you can receive a new inspection compliance mark.
9
0
Share

Introduction to Obtaining a Driver's License in Shanghai

Here is an introduction to obtaining a driver's license in Shanghai: 1. Subject 1: Learning and examination, usually taking about 2 weeks. 2. Subject 2: Learning and examination, including pile training and pile test, field training and field test, ideally taking about 3 weeks. 3. Subject 3: Learning and examination, road training and road test, ideally taking about 3 weeks. In total, it takes about 8 weeks, approximately 2 months. 4. Subject 4 examination content: Depending on the type of driver's license being obtained, 50 questions are proportionally selected from the corresponding Subject 4 question bank. A score of 90 is required to pass, and the examination time is 30 minutes. If 12 points (6 questions) are answered incorrectly during the examination, the test will be terminated.
16
2
Share

What Causes the Thud Sound When Braking to a Stop?

Excessive clearance between the brake pads and the brake caliper causes this issue. Here are the relevant explanations: 1. Automatic dissipation: When the wheels rotate, centrifugal force causes water droplets on the disc to dissipate automatically, which does not affect the braking system's functionality. Many small cars commonly use front disc and rear drum brakes, so after wading through water, some brakes may fail while others may weaken significantly. 2. Drum brakes: The drawback is that during heavy rain, water inside the brake drum cannot be drained promptly, which can easily lead to brake failure. However, after leaving the water, stepping on the brakes while driving continuously several times will wipe away the water droplets between the brake pads and the brake drum. Simultaneously, the heat generated by friction will dry them out, quickly restoring the brakes to their original sensitivity.
13
4
Share

What are the causes of motorcycle cylinder head temperature sensor failures?

Motorcycle cylinder head temperature sensor failures have different causes depending on their manifestations. Here are the specific details: 1. No output change from the transmitter when the measured medium temperature changes: This is mostly caused by sealing issues with the temperature sensor, possibly due to poor sealing or accidental welding of a small hole during installation. Generally, replacing the sensor housing is required to resolve this. 2. Unstable output signal: This originates from the temperature source itself being unstable. If the instrument display is unstable, it indicates weak anti-interference capability of the instrument. 3. Large output error from the transmitter: This has multiple potential causes, such as incorrect resistance wire selection in the temperature sensor leading to range errors, or possible lack of proper calibration during the sensor's factory production.
14
4
Share

How Deep Can a Car Go Through Water Before the Engine Gets Flooded?

The height of the air intake is a critical indicator of a vehicle's water fording depth, as water entering the intake can cause the engine to stall, and in severe cases, water can be sucked into the engine, leading to permanent damage. Below are the relevant details: 1. Above 20 cm: When the water level exceeds 20 cm, there is a risk of water entering the engine. For ordinary sedans, once the water level surpasses 20 cm (for SUVs with higher ground clearance, this threshold increases to 30 cm), the risk of engine flooding arises. 2. Exhaust outlet below the waterline: If the exhaust pipe's outlet is submerged below the waterline, rainwater can be drawn into the engine through the exhaust.
10
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.