Is there a retirement period for private cars now?

How often should a car be inspected after 15 years?

It requires inspection every six months, twice a year. Below are details about the annual inspection: National regulations: Motor vehicles must undergo regular inspections, including emissions testing, exterior appearance, lights, brakes, chassis, etc., and must have no traffic violation records to receive an inspection compliance sticker. All inspection dates are based on the registration date listed on the vehicle's license. From the date of registration, motor vehicles must undergo safety technical inspections within the following timeframes, commonly referred to as "annual inspection" or "annual review." Regular inspections: For small and micro non-operational passenger vehicles: within the first 6 years, inspection every 2 years; after 6 years, inspection once a year; after 15 years, inspection every 6 months. For operational passenger vehicles: within the first 5 years, inspection once a year; after 5 years, inspection every 6 months. For trucks and large/medium non-operational passenger vehicles: within the first 10 years, inspection once a year; after 10 years, inspection every 6 months. Imported vehicles follow the same rules as other vehicle types and can undergo regular inspections at any testing facility.

12

5

Share

Where is the Reverse Radar Switch?

Depending on the button layout of different car models, it is generally located on the button panel on the left side of the steering wheel or the central control panel. After turning on the reverse radar switch and shifting the gear lever into reverse, the reverse radar will start working. Reverse radar is a safety auxiliary device for parking or reversing a car. It can inform the driver of the surrounding obstacles through sound or more intuitive display, eliminating the troubles caused by the driver's peering around when parking, reversing, and starting the vehicle, and helping the driver to eliminate blind spots and blurred vision. When reversing, the reverse radar uses the principle of ultrasound. The probe installed on the rear bumper sends ultrasonic waves to hit obstacles and reflects these waves, calculating the actual distance between the car body and the obstacles, and then prompts the driver, making parking or reversing easier and safer. The reverse radar mainly consists of ultrasonic sensors, a controller, and a display or buzzer. Ultrasonic sensor: Its main function is to send and receive ultrasonic signals, then input the signals into the main unit, and display them through display equipment. Controller: It processes the signals and calculates the distance and direction between the car body and the obstacles. Display or buzzer: When the sensor detects that the car's distance from the obstacle reaches a dangerous distance, the system will issue an alarm through the display and buzzer to remind the driver. Millimeter-wave reverse radar is a type of reverse radar. It detects the presence and distance of obstacles through millimeter-wave radar probes, transmits them to the central controller, and achieves alarm and prompt functions. The millimeter-wave reverse radar adopts a multi-channel serial port control method with a central controller, which can achieve all-around detection and warning around the vehicle. Because it adopts high-frequency millimeter-wave detection, it overcomes the shortcomings of ultrasound, such as short working distance and unstable effects in harsh environments. It has good application effects in special vehicles, engineering vehicles, port and dock operation vehicles, cranes, and other large machinery industries. The advantages include stable detection, long detection distance, and no influence from rain, snow, or fog.

7

2

Share

What is the maximum wading depth of the Audi A4L?

The maximum wading depth of the Audi A4L is 320mm. The wading depth of the Audi A4L is determined by the height of the vehicle's chassis, which is the ground clearance listed in the model's parameter configuration table. Generally speaking, the greater the ground clearance, the higher the chassis, and the higher the safety factor when driving through waterlogged roads. Therefore, in terms of safe wading depth, the advantages of off-road vehicles and SUVs are obvious. However, for most compact and small cars with low chassis, the position of the vehicle's air intake should be used as a reference when passing through waterlogged roads. If the air intake of the Audi A4L is below the water level when wading, water will be sucked into the engine's cylinders. Since water cannot be compressed like air, it will cause serious damage to the engine's mechanical components (such as connecting rods, pistons, crankshafts, etc.). Therefore, the wading depth should not exceed the height of the engine's air intake. The height of the engine's air intake, and thus the maximum wading depth, can also be increased by installing a snorkel. If wading is unavoidable, the following safe and correct operations should be performed: Before driving through water, be sure to turn off the auto start-stop function to prevent the vehicle from automatically restarting after stalling in the water, which could cause severe engine damage due to water intake. Assess the underwater road conditions based on the passage of vehicles ahead and choose an appropriate entry point. Observe the paths taken by other vehicles and follow their tracks at low speed, avoiding sudden acceleration or deceleration. For roads prone to water accumulation, observe warning water level markers, trees, or reference points such as the wheels and doors of other vehicles to estimate the water depth before deciding whether to proceed. Know your vehicle's safe wading depth. If the water depth exceeds half the height of the tires or the engine's air intake, do not proceed and choose an alternative route instead.

6

3

Share

Can Audi A6L Use 92 Octane Gasoline?

According to the official vehicle manual recommendation, Audi A6L should use 95 octane gasoline. In addition to checking the appropriate gasoline grade in the vehicle manual, you can also find it marked on the fuel tank cap of the Audi A6L. Generally, the gasoline grade can also be determined based on the engine's compression ratio. Vehicles with an engine compression ratio between 8.6-9.9 should use 92 octane gasoline, while those with a compression ratio between 10.0-11.5 should use 95 octane gasoline. However, with the application of some new technologies nowadays, the gasoline grade cannot be solely determined by the compression ratio. High compression ratio engines can also be tuned to use lower octane gasoline because, apart from the compression ratio, other factors such as ignition timing, turbocharging technology, and Atkinson cycle technology also play a role. Generally, the higher the gasoline octane number, the higher the octane value and the better the anti-knock performance. 92 octane gasoline contains 92% isooctane and 8% n-heptane, while 95 octane gasoline contains 95% isooctane and 5% n-heptane. If the Audi A6L occasionally uses the wrong gasoline grade, simply switch back to the correct grade after consumption. However, long-term use of the wrong gasoline grade can have the following effects: For vehicles recommended to use lower octane gasoline, using higher octane gasoline will not cause damage, but the increase in octane value will alter the fuel's ignition point, leading to delayed combustion in the engine. This means both the engine's power output and thermal efficiency will decrease, resulting in poorer performance in actual driving experience. For vehicles recommended to use higher octane gasoline, using lower octane gasoline can cause engine knocking. Due to the significantly lower octane value, the gasoline's ignition point decreases, causing premature ignition during the compression stroke. If combustion occurs before the spark plug ignites during the compression stroke, resistance will arise during the upward stroke. This resistance makes the engine run very unstably. If it's mild knocking, it only increases noise without obvious engine damage. However, if there's noticeable knocking, it indicates severe engine conditions, affecting not only driving stability but also causing abnormal wear on pistons and cylinders, and in severe cases, cylinder scoring.

6

5

Share

How many points are deducted for crossing the line when changing lanes on the highway?

Crossing the solid line when changing lanes on the highway will result in a 3-point deduction and a fine of 200 yuan. On highways, vehicles are prohibited from reversing, driving against the flow, crossing the central divider, or stopping within the lane, as these actions violate prohibitory signs and markings. Below are the relevant traffic regulations: According to the "Scoring Standards for Road Traffic Safety Violations," Article 3 states that drivers committing any of the following violations will be penalized with 3 points: 1. Driving a passenger vehicle (excluding buses and school buses) with passengers exceeding the approved capacity by less than 20%; 2. Driving medium-sized or larger passenger or cargo vehicles, or hazardous material transport vehicles on roads other than highways or urban expressways, or driving other vehicles at speeds exceeding the limit by less than 20%; 3. Driving a cargo vehicle with a load exceeding the approved weight by less than 30%; 4. Driving a vehicle on the highway below the minimum speed limit; 5. Driving a vehicle prohibited from entering the highway onto the highway; 6. Driving a vehicle on the highway or urban expressway without using the designated lane; 7. Driving a vehicle that fails to slow down, stop, or yield to pedestrians at a crosswalk as required; 8. Driving a vehicle in violation of prohibitory signs or markings.

20

2

Share

Reasons for Abnormal Noise During Slow Braking?

There are several reasons for abnormal noise during slow braking: 1. There is sand or other foreign objects between the brake pads and brake discs; 2. If the noise is muffled, it may be due to issues with the brake caliper, such as wear on the sliding pins or detachment of the spring clips. 3. Braking after driving through water can also cause abnormal noise. 4. Excessive wear of the brake pads may expose the fixed points of the friction material, leading to noise when rubbing against the brake disc or brake drum. Below are some related solutions: 1. When a hissing sound occurs during braking, it is recommended to first check if there are any issues with the friction between the caliper, brake disc, and brake pads. 2. When a sharp noise occurs during braking, aside from the break-in period of new pads, the first step should be to check the brake pads for wear or foreign objects. If the brake pads are worn out, they should be replaced immediately. If foreign objects are found, the brake pads should be removed, the objects taken out, and then reinstalled. 3. When a muffled noise occurs during braking, check the brake caliper for wear on the sliding pins or detachment of the spring clips. If any issues are found, they should be replaced immediately. 4. When a rattling noise occurs during braking, check if any attachments on the brake pads are loose. The best solution is to reinforce them or replace the brake pads with new ones.

12

0

Share

Is there a retirement period for private cars now?

How often should a car be inspected after 15 years?

Where is the Reverse Radar Switch?

What is the maximum wading depth of the Audi A4L?

Can Audi A6L Use 92 Octane Gasoline?

How many points are deducted for crossing the line when changing lanes on the highway?

Reasons for Abnormal Noise During Slow Braking?

Will Car Windshield Washer Fluid Freeze in Winter and What Are Its Functions?

How to Maintain Tires?

What are the contents of the new policy on the transfer of new energy vehicles?

How to Use the Automatic Transmission D+?