Is there a regulation on the distance between front and rear parking?

2 Answers
DelRuby
07/28/25 7:49pm
There is no explicit regulation on the distance between front and rear parking. When stopping at a red light, you should maintain a distance from the vehicle in front that allows you to steer out if needed. During the process of slowing down and stopping, observe the situation behind you through the rearview mirror. If you notice a vehicle behind that cannot stop in time, you can immediately move away from the danger zone. During traffic jams or slow-moving traffic, large vehicles often leave a gap in front due to their slow acceleration. Small vehicles should avoid getting too close or squeezing into this gap, as the blind spot in front of large vehicles may lead to accidents. Below is a detailed introduction about it: 1. Introduction one: According to the laws of mechanics, a vehicle will continue to move forward for a certain distance during the time it takes to come to a complete stop from motion. 2. Introduction two: If the distance between the vehicle and the one in front is too close, it is very easy to collide with the front vehicle, causing a rear-end accident.
Was this review help?
11
1
Share
JudahFitz
08/12/25 12:40am
Regarding regulations on front and rear parking distances, there are no strict numerical requirements in traffic laws, but it's crucial from a safety perspective. When driving, I always maintain at least a half-meter to one-meter gap, avoiding being too close to vehicles in front or behind. The reasoning is simple: if the car ahead is too close, you might scrape it when reversing or starting; if the car behind brakes too late, rolling could easily cause a rear-end collision. Especially on slopes, the steeper the incline, the greater the distance should be—I've used an inclinometer to estimate this to prevent the car from sliding. Additionally, when parking in public places like mall entrances or roadside, I try not to block others' passage lanes. Sometimes police check for illegal parking, and insufficient distance can result in a ticket. New drivers should pay extra attention to this; practicing in spacious spots helps build proficiency. Remember, safety comes first—leaving more space brings peace of mind and can avoid unnecessary trouble and repair costs when it matters most.
Was this review help?
2
5
Share
Expand All
More Forum Discussions

How to Drive Correctly When the Vehicle Deviates on Icy Roads?

When the vehicle deviates on icy roads, avoid using emergency braking or sharp steering to evade. Instead, utilize the engine's drag effect to decelerate or stop. The most crucial aspects of driving in snowy conditions are heightened attention, maintaining a steady speed, and keeping a safe distance. Correct operation methods: The first thing to do is to stop the automatic start brake, bring the vehicle to a halt, and sound the horn. After stopping, observe the surrounding environment to check for other vehicles. At this point, you can request assistance from traffic police and park the vehicle in a designated parking spot. Precautions for driving in snowy conditions: Reduce speed: Due to the extremely low adhesion of icy roads, to prevent the vehicle from skidding or colliding with other vehicles, drive at a reduced speed and maintain a safe distance. The longitudinal safe distance should be three times that on dry roads. Turn the steering wheel slowly: When turning on icy roads, gradually release the accelerator pedal in advance, decelerate smoothly, and turn the steering wheel slowly. Avoid sudden movements. If road and traffic conditions permit, appropriately increase the turning radius to turn earlier or less, preventing wheel skidding. Slow down in advance when meeting another vehicle: When encountering another vehicle on icy roads, choose a safe and wide section of the road, slow down in advance, stabilize the steering wheel, and pass slowly on the right side. Try to increase the lateral distance between the two vehicles and maintain an appropriate distance from the roadside. If necessary, stop and yield.
3
0
Share

Can I Take Driving Test Subjects 3 and 4 Before Subject 2?

No, you cannot take driving test subjects 3 and 4 before subject 2. According to national driving test regulations, the content and passing standards for each subject are standardized across the country, and the examination sequence must proceed in the order of subject 1, subject 2, subject 3, and subject 4. You are only allowed to take the next subject after passing the previous one. How to schedule a driving test: In the "Traffic Management 12123" app homepage, find and open the "Test Scheduling" option. After entering the candidate information confirmation page, carefully verify your personal information and the city where you are applying. Once confirmed, click the "Confirm Information" option. Select the test center where you want to take the exam by clicking the "Test Center" section to enter the test center selection page. Choose an appropriate test center from those provided by the system. Enter the "Test Scheduling Business Instructions" reading interface, wait for 5 seconds, and then click the "Read and Agree" option at the bottom of the page. Select the exam date and the specific test session based on your personal situation, then click the "Schedule" button in the lower right corner of the page to submit your scheduling information. In the app, enter the verification code you received. After entering the verification code, click the "Submit" button to complete the scheduling application.
18
4
Share

Is It Normal for Black Residue to Appear on a Car's Exhaust Pipe?

It is normal for black residue to appear on a car's exhaust pipe. Typically, the primary fuel for a car is gasoline, and after prolonged use, black residue can accumulate on the exhaust pipe. The extent of residue varies significantly among different types of vehicles. Generally, there are three common scenarios: Faulty spark plugs: When a car is in a cold-start condition, poor spark plug performance can lead to insufficient combustion of the air-fuel mixture, resulting in excessive black smoke. Oxygen sensor issues: If the engine has been in use for too long, its overall performance may degrade, causing the car to inject gasoline without proper air combustion, which produces large amounts of black smoke. Incorrect engine ignition timing: This timing discrepancy prevents oxygen and fuel from fully mixing and burning. Other potential causes include a damaged temperature sensor or clogged fuel injectors. If any of these issues are detected, they should be addressed promptly. Regular maintenance should also focus on these potential problems.
5
5
Share

Should the throttle be released when depressing the clutch to shift gears?

When depressing the clutch to shift gears while driving, the throttle must be completely released. Detailed explanation: The clutch pedal should be controlled using the ball of the foot. When depressing the clutch pedal, place the ball of your foot on the pedal with your heel touching the ground. When the clutch is fully depressed, keep your knee slightly bent. Precautions: Do not keep your left foot resting on the clutch pedal while driving. Avoid releasing the clutch too quickly or deliberately raising the engine RPM too high, as this will accelerate clutch wear. Always fully depress the clutch pedal before shifting gears. The throttle should be released when depressing the clutch.
17
4
Share

What is the Principle of Car Polishing?

Car polishing works by using a polishing machine and a sponge pad in conjunction with polishing wax, generating heat through high-speed rotational friction to soften the paint surface. Below is an introduction to car polishing: The Process of Car Polishing: Car polishing is a step in the car detailing process, performed before waxing, sealing, or coating. This is because sealing or coating requires prior polishing, and only a finely polished car can achieve a mirror-like finish. This is an essential step for sealing. Without polishing, the paint surface remains uneven, and the sealing effect will last only a short time, failing to provide long-term adhesion, making it no different from waxing. The Benefits of Car Polishing: Waterproofing: Reduces watermarks, dark spots, rust, and damage to the paint. Anti-aging: Minimizes UV damage to the paint and extends its lifespan. Gloss enhancement: Improves the smoothness of the paint to varying degrees, making the car's color more vibrant. Anti-static: Reduces damage caused by friction with dust, fabrics, and synthetic fibers in the air. Anti-corrosion: Effectively isolates acid rain and acid mist from damaging the paint.
13
4
Share

Will the power rearview mirror be damaged if forcibly folded by hand?

Folding the power rearview mirror by hand once or twice won't cause significant impact, but long-term manual folding may lead to irreversible damage or malfunctions. Detailed explanation: Most power rearview mirrors that have been manually folded will exhibit asynchronous folding speeds on both sides due to the displacement of internal gears. While this asynchrony may seem like a minor issue, it can be extremely bothersome for many perfectionists. Function of rearview mirrors: Automotive rearview mirrors reflect conditions behind, beside, and below the vehicle, allowing drivers to indirectly observe these areas and expand their field of vision. Classification: By purpose: exterior rearview mirrors reflect the rear sides of the vehicle, lower rearview mirrors reflect the front underside, and interior rearview mirrors reflect conditions behind the vehicle and inside the cabin.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.