···
Log in / Register

Is There a Problem If a Piece Is Missing from the Side of the Tire?

4 Answers
LaRose
07/29/25 2:11pm
There is a problem if a piece is missing from the side of the tire, and it needs to be replaced promptly; otherwise, there is a risk of a tire blowout. Below are specific details about tires: Effects of low tire pressure: Low tire pressure increases the contact area between the tire and the ground, leading to abnormal temperature rises inside the tire during driving. Additionally, severe deformation of the tire side accelerates the aging of internal steel wires and fabric layers, creating a hidden risk for blowouts. It also increases fuel consumption and reduces tire lifespan. Effects of high tire pressure: High tire pressure reduces the tire's friction and adhesion, affecting braking performance. It can cause steering wheel vibration and deviation, reducing driving comfort. It also accelerates localized wear of the tread pattern in the center of the tire, shortening the tire's lifespan.
Was this review help?
1
0
Share
StJames
08/13/25 6:13am
A missing chunk on the tire sidewall is a serious issue that should never be taken lightly. The tire sidewall is a critical component for bearing vehicle weight and absorbing shocks, and it's extremely fragile. Structural integrity is severely compromised when a piece is missing, which can lead to unstable tire pressure or even a blowout. The risk escalates dramatically during high-speed driving or cornering, potentially causing loss of vehicle control and resulting in accidents. If the damaged area exposes internal steel belts or cords, the situation becomes even more dangerous, requiring immediate stopping. I advise against attempting to drive to a repair shop yourself—instead, call for a tow truck or visit the nearest auto repair facility for inspection. In most cases, sidewall damage cannot be repaired, necessitating replacement with a new tire. Never compromise safety to save money—it should always be the top priority. Develop the habit of inspecting tire sidewalls with a flashlight during every car wash or refueling, checking for scratches or dents. Avoid making sharp turns in areas with hard obstacles, and maintaining proper tire pressure can also help prevent similar issues. During regular vehicle maintenance, have professionals conduct comprehensive tire inspections to identify and address problems early.
Was this review help?
5
5
Share
Expand All
BrodyLee
10/10/25 7:37am
A missing chunk on the tire sidewall is definitely hazardous. I experienced this with my old car when it scraped against a curb during a turn. Sidewall damage is no minor issue—it thins the tire, making it unable to withstand daily pressures. It could blow out while driving, especially terrifying at high speeds. A sudden blowout can cause the car to skid, increasing collision risks. I'd pull over immediately to check the severity: superficial scratches might allow limping to a repair shop, but deep cuts or cracks demand instant replacement. Mechanics often say sidewalls can't be reliably patched. The cost isn't trivial, but safety outweighs expenses. Since then, I routinely feel the sidewalls during weekly car washes for abnormalities. Maintaining proper tire pressure—neither too high nor low—reduces extra strain. I avoid sharp turns over curbs and slow down in gravel zones. These habits helped me spot several early warning signs.
Was this review help?
15
0
Share
Expand All
LeZoe
11/24/25 2:01am
Missing chunks on the tire sidewall are absolutely unacceptable! The sidewall is as thin as paper, and any missing piece weakens its support, making it prone to cracks, air leaks, or blowouts while driving. The risk is even greater at high speeds when temperatures rise. Stop immediately and inspect: if the wound is deep and exposes the inner layer, do not drive any further—replace the tire right away. Sidewall damage is generally irreparable; repairs are only suitable for the tread. Daily checks are simple—use your phone's flashlight to inspect the sidewall for scratches or deformations while washing the car. Maintain moderate tire pressure and avoid overloading the tires.
Was this review help?
4
1
Share
Expand All
More Forum Discussions

Do pure electric vehicles require annual inspection?

New energy pure electric vehicles do require annual inspections. Whether it's a pure fuel-powered model, an electric model, or a hybrid model, private passenger vehicles need to undergo on-site testing after six years of use. Non-commercial passenger vehicles require annual inspections between 6 and 15 years of use, and after 15 years, they need to be inspected every 6 months. Therefore, new energy pure electric vehicles also require annual inspections, although the inspection content differs. Annual inspection time regulations: The first annual inspection for passenger cars is conducted when they reach six years of use. Non-commercial small and micro passenger vehicles, including family cars over 6 years but under 10 years old, require biennial inspections. For vehicles exactly six years old, the annual inspection requires driving the vehicle to the inspection station with the owner's ID card, vehicle license, vehicle and vessel tax or tax exemption certificate, and compulsory traffic insurance policy. After passing the inspection, a certificate will be issued, which, along with the other documents, must be presented at the relevant window to obtain the annual inspection sticker.
6
0
Share

What does the D gear plus and minus mean?

D gear plus and minus mean The "+" and "-" signs next to the D gear are unique functions of manual-automatic transmission models, which are used for upshifting or downshifting in the manual mode of the transmission. The manual mode is often marked as M gear or S gear. Many people drive manual-automatic transmission cars in D gear all the time, not knowing when to switch to M gear, thinking that they have to wait until the car stops to switch. In fact, it is not necessary, and you can switch from D gear to M gear at any time. The following is an introduction to the S gear: 1. Introduction: It keeps the engine at high speed for a long time, allowing the car to move at high speed in low gear for a long time, thereby obtaining greater torque output and acceleration. 2. Precautions: Because the S gear only delays upshifting without changing other working links, it will inevitably increase the load of the transmission in a short time, and the temperature will also rise accordingly, and the wear will also increase. Therefore, try not to use the S gear for a long time.
19
4
Share

How to Replace the Battery in a Trumpchi GS4 Key?

On the back of the remote battery, press the button in the direction indicated by the arrow and pull the mechanical key outward. The mechanical key can be used to open the car door when the smart key runs out of battery, but it cannot start the engine. After removing the mechanical key, you can open the remote key by using your fingernail to pry open the gap on the side of the key—it's not complicated. Once opened, you will see the battery compartment on the back cover. Follow the instructions to remove the old battery and replace it with a new one. Then, close the back cover and reassemble the key. Here is some additional information: Trumpchi GS4: The new GS4 has undergone adjustments and upgrades in its detailed design. The most significant changes to the front face come from the headlights and fog lights, with overall lines appearing more youthful and sporty. The rear changes also focus on the light clusters, with large-sized light strips enhancing the rear's recognizability. The new Trumpchi GS4 still uses the 1.3T and 1.5T engines, with maximum power outputs of 101kW (137PS) and 112kW (152PS), respectively. The transmission options have been upgraded to include a 6-speed manual, 6-speed automatic, and 7-speed dual-clutch.
4
5
Share

Is it mandatory to wear seat belts in the back seat on highways?

The back seat passengers must wear seat belts on highways. The function of seat belts is: in the event of a vehicle collision or when emergency braking is applied, the pre-tensioning device will instantly retract, tightening the slack seat belt, firmly securing the passenger to the seat to prevent secondary collisions. Precautions for driving on highways include: 1. The driver and front-seat passenger should fasten their seat belts, and the driver must not answer phone calls; 2. Avoid sudden steering wheel movements while driving at high speeds; 3. Do not change lanes arbitrarily while driving. When changing lanes or overtaking the vehicle ahead, the turn signal must be activated in advance; 4. When overtaking, only the adjacent lane may be used. After overtaking, immediately return to the driving lane. Vehicles must not straddle or drive on the lane dividing line; 5. Do not reverse, drive in the opposite direction, make U-turns or turns by crossing the central divider, conduct test drives or drive training vehicles, or overtake or park on ramps; 6. Maintain a following distance of more than 100 meters. When the speed is below 100 kilometers per hour, the distance from the vehicle ahead in the same lane can be appropriately reduced, but the minimum distance must not be less than 50 meters.
1
5
Share

What Are the Differences Between Transmission Types?

Here is the classification of transmissions along with their descriptions: Manual Transmission (MT), Automated Manual Transmission (AMT), Dual-Clutch Transmission (DCT), Automatic Transmission (AT), and Continuously Variable Transmission (CVT). Differences explained: 1. Manual Transmission (MT): Composed of gears and a mechanical clutch for each gear, it has a simple structure, high transmission efficiency, and is highly reliable. However, it requires full manual operation, including clutch engagement, which can be a bit cumbersome. But it also offers driving pleasure and helps improve driving skills. 2. Automated Manual Transmission (AMT): Similar in structure to a manual transmission, but the entire gear-shifting process is completed by electronic controls, eliminating the need for manual operation. However, due to insufficient automation in the electronic control system, gear shifts can feel noticeably jerky. Often used as a low-cost automatic transmission solution for economy cars; its simple structure and high shift efficiency also make it popular in racing. 3. Dual-Clutch Transmission (DCT): Similar in structure to a manual transmission, it consists of two sets of clutches. When driving in one gear, the next gear is already engaged and ready to work, resulting in very fast gear shifts, though smoothness at low speeds is slightly compromised. Initially used in sports cars, it is now widely adopted in various vehicle types. 4. Automatic Transmission (AT): Composed of components like a torque converter, its structure is relatively complex. Some power is lost during gear shifts, leading to slightly lower transmission efficiency. However, it shifts smoothly and is mature and reliable in technology, making it the choice for most automatic vehicles. 5. Continuously Variable Transmission (CVT): Primarily consists of two cone-shaped pulleys and a steel belt, allowing for continuous adjustment of the gear ratio. In theory, it is the smoothest and most economical among all transmission types. However, due to its structural limitations, it cannot handle high torque during aggressive acceleration. It is commonly used in vehicles prioritizing economy and comfort.
4
5
Share

How to Restore a Car's Original Factory Paint?

Emergency products: fine wax, coarse wax. Emergency products: fine wax, touch-up paint pen. Emergency products: scratch and rust remover, spray paint. Emergency products: dent repair technology.
11
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.