···
Log in / Register

Is There a Noticeable Effect After Replacing the Shock Absorbers on the Baojun 560?

3 Answers
LauraDella
08/29/25 5:01am
Replacing the shock absorbers on the Baojun 560 has a noticeable effect. Introduction to Shock Absorbers: Shock absorbers are wear-prone components during vehicle use. The performance of shock absorbers directly affects the smoothness of driving and the lifespan of other mechanical parts. Therefore, it is essential to keep shock absorbers in good working condition. Function of Shock Absorbers: Shock absorbers ensure smooth vehicle operation by buffering vibrations. Without shock absorbers in the suspension system, the car would run unevenly and sway. Most modern vehicles use hydraulic shock absorbers. Their working principle involves filling a cylinder, drilled with small holes and equipped with a piston, with pressurized oil. When the spring vibrates, the oil is forced through these small holes, thereby limiting the movement. The diameter of the holes determines the degree of restriction. Smaller holes provide stronger restriction, enhancing vehicle stability, while larger holes offer a more comfortable ride. The design must balance stability and comfort by carefully selecting the hole diameter.
Was this review help?
8
5
Share
JohnnyRose
09/11/25 2:48am
It's quite common for the performance of the original shock absorbers on the Baojun 560 to degrade over time, and replacing them indeed brings noticeable improvements. Having driven the same model, I can attest that the original ones made the ride bumpy and noisy over rough roads. After replacement, the ride became much smoother, with about 80% reduction in vibrations when going over speed bumps or dirt roads, making the overall experience more comfortable. The cabin noise also decreased, making long drives less fatiguing. Handling improved significantly, especially during turns and braking, with more stability in rainy conditions or at high speeds. Although replacing shock absorbers costs a few hundred yuan, the effect is immediate, elevating the vehicle's overall comfort by a large margin. If budget allows, I recommend replacing them sooner rather than later—not only does it extend tire life but also reduces wear on other suspension components. Of course, opting for reputable brands ensures reliability; avoid cheap, low-quality parts.
Was this review help?
9
1
Share
Expand All
SanAlejandro
10/25/25 3:36am
I enjoy tinkering with my car in my spare time. After replacing the shock absorbers on my Baojun 560, the driving experience has been noticeably different. The new shocks provide stronger body support, reducing tail swing when taking corners, and offer better bump absorption—changing the sound from loud bangs to muffled bass. The reduction in seat vibration is particularly significant, and passengers have also reported much improved comfort. Cost-wise, a full replacement can be done for under 800 yuan, and considering the long-term savings on maintenance (less tire wear), it's a worthwhile investment. If left unchanged, the old shocks would accelerate suspension aging and lead to potential issues with chassis components. DIY replacement is possible, but it requires some tool knowledge, so beginners are better off seeking a professional shop. The improvement is definitely positive and worth a try.
Was this review help?
3
2
Share
Expand All
More Forum Discussions

What is a Hydrogen Fuel Vehicle?

Hydrogen fuel vehicles refer to automobiles that primarily use hydrogen as their energy source for propulsion. In conventional internal combustion engines, diesel or gasoline is typically injected, whereas hydrogen vehicles utilize gaseous hydrogen instead. Fuel cells and electric motors replace the standard engine. The principle of hydrogen fuel cells involves introducing hydrogen into the fuel cell, where the electrons of hydrogen atoms are blocked by a proton exchange membrane, then conducted through an external circuit from the negative to the positive electrode, generating electricity to drive the motor. Additional Information: 1. Hydrogen Fuel Principle: Hydrogen molecules combine with oxygen molecules through combustion to produce thermal energy and water. Hydrogen fuel cells generate electricity by combining liquid hydrogen with oxygen from the air. Based on this principle, hydrogen fuel cells can generate electricity to power vehicles, supply household or industrial electricity, or serve as mobile phone batteries. 2. Hydrogen Storage Methods: There are two traditional hydrogen storage methods. One method involves using high-pressure cylinders (hydrogen tanks) to store hydrogen, but these cylinders have limited storage capacity and pose explosion risks. The other method involves storing liquid hydrogen, but the storage tanks are very large and require excellent insulation devices to maintain temperature.
7
0
Share

What is the fuel tank capacity of the BYD Han?

The fuel tank capacity of the BYD Han hybrid version is 48 liters, as officially announced. Owners who have purchased the BYD Han hybrid version can also check this information on the vehicle's configuration sheet. The BYD Han hybrid version uses 92-octane fuel, with a fuel consumption of 1.4L per 100 kilometers. A full tank can cover a distance of 3,429 km. During daily driving, it is necessary to always pay attention to the remaining fuel level in the tank. This is usually observed through the fuel gauge inside the vehicle. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments, and it is advisable to refuel when only 2 segments remain to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to the safe limit, and there is still some space from the safe limit to the tank opening. This space is designed to accommodate fuel expansion due to temperature increases, preventing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the calibrated tank capacity.
16
4
Share

Where are the positions of the brake, accelerator, and clutch?

The accelerator, brake, and clutch in a car are separate. The clutch is on the left side and is controlled by the left foot, while the accelerator and brake are on the right side, with both pedals controlled by the right foot. Below is some information about brake pads: 1. Introduction: Brake pads are specially designed friction materials on a vehicle used for braking. They are also called brake linings. 2. Replacement cycle: There is no fixed replacement interval for brake pads. It is recommended to inspect them regularly. For general household vehicles, inspection is advised around 30,000 to 60,000 kilometers, and replacement should be determined based on the degree of wear. 3. Function: The heat insulation layer of brake pads is made of non-heat-conductive materials to insulate heat. During braking, they are pressed against the brake disc or drum to create friction, thereby achieving vehicle deceleration and stopping. Due to friction, the friction material gradually wears out. Lower-cost brake pads tend to wear out faster. It is essential to replace the brake pads once the friction material is depleted; otherwise, braking effectiveness will be lost, and the brake disc may be damaged.
12
2
Share

Does entering the left-turn waiting zone when the light suddenly turns red count as running a red light?

If the left-turn arrow light is red, a motor vehicle making a left turn is considered to have run a red light. Here is relevant information about the left-turn waiting zone: 1. The correct way to handle a left-turn waiting zone: The left-turn waiting zone is only for vehicles making a left turn. When the straight-through light in the same direction is green, although the left-turn light is red, left-turning vehicles are allowed to enter the intersection and wait in the left-turn waiting zone. They can proceed through the intersection when the left-turn signal turns green. 2. Whether points will be deducted: No points will be deducted; it is a legal operation. Based on the description, if a vehicle enters the left-turn waiting zone when the light suddenly changes from green to red (even without a yellow light transition), as long as the vehicle passed the stop line when the light was green, it can continue to proceed according to the relevant regulations in the "Implementation Regulations of the Road Traffic Safety Law." This does not count as running a red light.
19
4
Share

Why does BMW QQ Music download fail and prompt to retry?

The reason is poor signal. Here is an introduction about BMW: 1. Overview: BMW (abbreviation for Bayerische Motoren Werke) is a German automobile brand under the BMW Group. It has four model series: i, X, Z, and pure numbers, along with series like 1, 2, 3, and the M series (BMW's official high-performance modification division) based on improvements to each series. The B.M.W. in the BMW logo stands for Bavarian Motor Works, and the colors and combination of the logo come from the state emblem of Bavaria, where BMW is located. 2. Model Series: BMW's model series include 1, 3, 4, 5, 6, 7, 8 (discontinued), i, M, X, and Z. Among them, the 1 Series is a compact car, the 3 Series is a midsize car, the 4 Series is a midsize coupe (including convertibles), the 5 Series is a mid-to-large-size car, the 6 Series is a mid-to-large-size coupe (including convertibles), the 7 Series is a luxury D-segment car, the i Series is BMW's non-mass-produced concept car series, M is BMW's high-performance and sports car version, the X Series is BMW's specific SUV (Sports Utility Vehicle) series, and the Z Series is BMW's entry-level sports car.
20
2
Share

Are the interiors of the Audi A6L and Audi A8L the same?

The interiors of the Audi A6L and Audi A8L are not the same. The A6L is a mid-size luxury sedan, while the A8L is the top-tier luxury sedan in the Audi lineup and serves as the flagship model of the brand. Size differences: Due to their different positioning, the two models have significant distinctions. In terms of body dimensions, the A8L measures 5302mm in length, 1945mm in width, and 1487mm in height, with a wheelbase of 3128mm. In comparison, the A6L measures 5036mm in length, 1874mm in width, and 1466mm in height, with a wheelbase of 3012mm. From the dimensions, the A8L is larger than the A6L. Powertrain differences: In terms of powertrain, the current domestic A6L offers four gasoline engine options: a 1.8T turbocharged engine, a 2.0T turbocharged engine, a 2.5L naturally aspirated engine, and a 3.0T supercharged engine. On the other hand, the A8L is equipped exclusively with a 3.0T turbocharged engine. The A6L provides more engine choices compared to the A8L. Additionally, there are noticeable differences in their taillights and tire widths.
7
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.