Is there a fee for rescheduling the Subject 1 test?

1 Answers
NicoleDella
07/30/25 10:44am
There is no fee for the first retake, but a fee is required for the second retake. You can reschedule the Subject 1 test 10 days after failing. There is no limit to the number of times you can reschedule the Subject 1 test. For Subjects 2, 3, and 4, if you fail, you can reschedule the retake on the 10th natural day after the failure. Below is relevant information: The Subject 1 test covers road traffic rules, traffic signals, handling of traffic safety violations and accidents, regulations on applying for and using a motor vehicle driver's license, motor vehicle registration, and other road traffic safety laws, regulations, and rules. Each subject test can be taken once, and if you fail, you are allowed one retake. If you do not take the retake or fail the retake, the current test session ends, and you must reschedule the test. However, for Subjects 2 and 3, the rescheduling must be done at least 10 days later.
Was this review help?
4
5
Share
More Forum Discussions

What Are the Differences Between 1.4T and 1.6L Engines in Cars?

The differences between 1.4T and 1.6L engines in cars are as follows: 1. Displacement: The 1.4T engine has a smaller displacement than the 1.6L engine. 2. Engine Type: The 1.4T uses a turbocharged engine, while the 1.6L is naturally aspirated. 3. Quality: Vehicles with 1.4T engines generally offer better performance, but those with 1.6L engines have lower maintenance costs and relatively better reliability. The meaning of 'Golden Displacement' can be interpreted from three aspects: 1. Fuel efficiency; 2. Good handling, power, and comfort; 3. Ability to meet various consumer needs: Such as business, commuting, travel, etc. In other words, it refers to vehicles that can maximally satisfy various consumer demands at a reasonable price, hence the term 'golden displacement' and 'golden models'.
20
2
Share

What Causes a Sudden Loss of Power in a Car?

Causes of a sudden loss of power in a car include fuel supply system failure and intake system failure. If you notice a lack of power in your car, perform an engine fault diagnosis to check for any trouble codes. If present, follow the trouble codes for repairs. Below is a detailed analysis of the causes: Fuel Supply System Failure: Insufficient fuel entering the combustion chamber can lead to a loss of power. Causes include clogged fuel injectors, leaking fuel lines, a blocked fuel filter, or an aging fuel pump. Solution: Visit a 4S shop for a fuel system inspection. If issues are found with the fuel injectors, fuel lines, or fuel pump, address them promptly. Intake System Failure: For a car's engine to operate, it requires not only fuel but also air; otherwise, the engine cannot run smoothly. Causes of power loss include a dirty or clogged air filter or throttle system, malfunctioning intake temperature or pressure sensors, or a faulty mass air flow sensor. Solution: Inspect the air filter and throttle system. If blockages are found, clean them promptly.
19
3
Share

How to Wire a Motorcycle for Hazard Lights?

Motorcycle hazard light wiring: Connect the three wires of the turn signal switch directly to the three wires of the hazard light switch. The middle wire of the turn signal switch connects to the input of the hazard light switch, and the remaining two wires can be connected randomly. Scenarios for using hazard lights on motorcycles: Driving in foggy conditions: Due to poor visibility in foggy weather, it is advisable to not only turn on the hazard lights but also activate the fog lights to alert passing vehicles and provide illumination. In case of a breakdown or traffic accident on the road: Hazard lights should be turned on to alert passing vehicles to drive safely. When towing a malfunctioning vehicle: Both the towing vehicle and the towed vehicle should activate the hazard warning lights to indicate that the vehicle is in an abnormal state. Hazard lights are the highest-level warning lights, so many people instinctively turn them on in heavy fog. However, this practice is prohibited in some countries because it can make it difficult for following vehicles to determine the direction the leading vehicle is taking. Never change lanes with hazard lights on. Avoid changing lanes in foggy conditions if possible. If lane change is necessary, turn off the hazard lights and use the turn signals. If driving on a highway, the driver should activate the turn signal at least 500 meters before changing lanes or exiting the ramp.
12
5
Share

What are the reasons why the air pump cannot build up pressure?

The reasons why the air pump cannot build up pressure include motor phase loss, damaged air pump seal, pressure relief valve set too low, or clogged air pump tubing. Below are detailed explanations and solutions: Motor phase loss: Motor phase loss prevents the motor from outputting rated power, thereby limiting the air pump's maximum output pressure. As the air pump pressure increases, the motor load gradually increases, and power consumption rises accordingly. The solution is to check the electrical circuit. Damaged air pump seal: This causes air leakage between the high and low pressure chambers. Most air pumps are piston-type, similar in structure to hydraulic cylinders. The piston head has seals that can wear out or degrade over time due to normal wear and aging, allowing air to bypass between the high and low pressure chambers and preventing pressure buildup. The solution is to disassemble the fuel pump compressor and replace the seals. Pressure relief valve set too low: For safety reasons, air pumps have a pressure relief valve at the output to prevent dangerously high pressure. If this valve is set too low, the air pump will automatically shut down whenever the pressure reaches the relief setting. The solution is to adjust the pressure relief valve to a higher setting. Clogged air pump tubing: Disconnect the air pump tubing from the dryer and operate the pump. If black smoke-like substances emerge from the tubing, it indicates clogged air pump tubing. The solution is to replace the air pump tubing.
3
2
Share

What does Honda SYNC mean?

SYNC on Dongfeng Honda refers to the cruise control function. After activating cruise control, the vehicle can move forward automatically without the driver needing to press the accelerator. Below are detailed explanations about car driving: 1. Overview: Driving a car is one of the basic skills modern people need to master. To acquire driving-a-motor-vehicle skills, one must meet the required age and physical conditions, and undergo training and examinations on road traffic safety laws and regulations, basic automotive mechanical knowledge, and safe driving practices. 2. Others: The permission to drive a vehicle is granted through the issuance of a driver's license. This indicates that obtaining a driver's license is a formalized procedure that must be issued by a specialized authority.
2
3
Share

What is the Difference Between Automatic and Dual Clutch?

1. Different Principles: Automatic transmissions use a computer to control hydraulic oil to push pistons for gear shifting based on throttle size, vehicle speed, and throttle opening. Both manual-automatic and dual-clutch transmissions can be considered types of automatic transmissions. Manual-automatic transmissions add a manually adjustable gear-shifting mechanism to the original automatic transmission, allowing drivers to manually shift gears. Dual-clutch transmissions use two clutches, with one controlling gears 1, 3, and 5, and the other controlling gears 2, 4, and 6. 2. Different Operation Methods: Automatic transmissions do not require the driver to manually shift gears; the vehicle automatically selects the appropriate gear based on driving speed and traffic conditions. Manual-automatic transmissions combine manual and automatic gear shifting, allowing the driver to either use automatic shifting by simply pressing the accelerator or manually change gears.
1
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.