Is there a difference between 91V and 91W tires?

2 Answers
SanFernando
07/29/25 3:40am
91V indicates a maximum speed capacity of 240 km/h, while 91W indicates a maximum speed capacity of 270 km/h. Here are the specific differences between the two: 1. Speed rating: V means the tire can withstand speeds up to 240 km/h, while W means the tire can withstand speeds up to 270 km/h. 2. Load index: 91 represents the tire's load index. A 91W tire can bear a load of 615 kg and withstand a maximum speed of 270 km/h. Tire speed ratings can be divided into different grades from A to Z, with grade A further subdivided into eight different levels from A1 to A8. The later the letter representing the tire speed rating, the better the tire performance.
Was this review help?
3
2
Share
JulietteMarie
08/12/25 7:29am
I often help friends check tire specifications, and this question is quite interesting. The main difference between 91V and 91W lies in the letter. The number 91 indicates the same load capacity, both capable of bearing approximately 615 kilograms, but V represents a maximum speed of 240 kilometers per hour, while W stands for 270 kilometers per hour. This makes a significant difference in actual driving. W-rated tires use more heat-resistant materials and reinforced structures, providing better grip during high-speed cornering or rapid acceleration, with a higher safety factor. However, ordinary family cars rarely require such high speeds, and V-rated tires are usually sufficient, making it unnecessary to spend extra money upgrading to W. When choosing tires, it's essential to consider your car model and daily driving habits. Don't just focus on the specifications; it's best to check the owner's manual or consult a professional technician to avoid purchasing unsuitable tires that could affect handling and wear.
Was this review help?
4
2
Share
Expand All
More Forum Discussions

What is the process for new vehicle inspection and registration in Beijing?

Compare the actual vehicle appearance photos, the whole vehicle factory certificate, and the technical parameters listed in the motor vehicle product announcement (for imported vehicles, the conformity certificate can be checked). Verify the safety technical inspection report for non-exempt vehicle models. Check the actual vehicle appearance, body color, brand, and model. Verify the vehicle identification number (VIN), engine model and number, and inspect seat belts and seating capacity. Inspect the triangular warning sign, and after confirming the vehicle meets requirements, annotate the inspection record form.
17
3
Share

How to Open a BAIC Car Key?

Press the button on the remote key to release the stainless steel key. Place the key with the icon side facing up. Hold the two ends of the key with your left index finger and thumb, aligning them with the pattern. Place your right thumb on the right side of the keychain. While holding both sides of the key with your left hand, press down firmly with your right thumb to widen the curved gap in the middle, then pull both hands outward simultaneously. Forcefully separate the unpatterned half from the middle gap. Between the two parts, you will find a rubber strip to prevent dust from entering.
7
2
Share

Is the U-turn Make-up Test in Changshu Subject 3 No Longer Available?

Changshu Subject 3 U-turn make-up test is available. Changshu Subject 3 U-turn test techniques: Simulated lighting, which is emphasized during both practice and simulation, should not result in low-level mistakes here. There is ample time to perform actions after the voice command, so avoid rushing and causing misoperations. Making a mistake here will result in an immediate failure. For starting the vehicle: first press the clutch, second shift into gear, third turn on the signal light, fourth honk the horn for a longer duration or twice, pay attention to pedestrians, and accelerate steadily. For proceeding straight at the intersection ahead, maintain a speed of 25 km/h through the intersection. Turn your head left and right to observe and honk the horn, though there is no strict requirement for this. For safety, it's best to do so, but avoid exceeding 30 km/h! After passing the intersection, proceed into the lane; observe left and right and honk the horn, though these actions are not strictly required to continue. Changshu Subject 3 U-turn precautions: Do not drive too fast, as completing the turn in less than 10 seconds is possible. Avoid maintaining a speed exactly at 40 km/h, as some instructors mention a margin of error of about 2 km. If your speed is calculated as below 40 km/h, it will not be acceptable.
3
5
Share

What to Do If the Car Glass Can't Be Cleaned After Parking Near a Construction Site?

For general dust on car glass, it is recommended to wipe it off with a dry cloth, but the fabric should not be too hard to avoid scratching the glass. After wiping, clean it directly with glass cleaner. Stains are usually difficult to remove with just a dry cloth. You can apply some toothpaste to the stains and then wipe them off. You can first wipe the glass with a damp cloth, then use a clean damp cloth dipped in a little alcohol or even liquor. Use sandpaper specifically designed for car cleaning to remove paint or oil stains, and then restore the car's surface gloss by waxing.
14
0
Share

What is the license plate registration process for new energy vehicles in Beijing?

First, obtain the tax certificate or tax exemption certificate from the municipal tax authority, then go to the quota review window of the municipal transportation commission to verify the vehicle limit value. According to the time and location of the online appointment for license plate replacement, deliver the vehicle to the processing point and submit the vehicle owner's ID card and the vehicle registration certificate. In addition, the traffic police department provides supporting services for new energy vehicle business, opening a priority channel for new energy vehicle license plate replacement.
20
4
Share

Does Cutting the Rear Panel of a Car Count as a Major Accident?

Whether cutting the rear panel of a car counts as an accident vehicle depends on how the rear panel is repaired. If it involves cutting and replacement, then it is considered an accident vehicle. If only simple repairs are done without cutting and welding, it does not count as an accident vehicle. In most cases, repairing the rear panel requires cutting and welding. Any vehicle that has undergone repairs such as reshaping, cutting, or welding is considered an accident vehicle. Methods to Identify an Accident Vehicle: Check the Gaps: First, observe whether the gaps between the body panels are even and consistent, then measure if the body lines are smooth. If the waistline appears noticeably uneven, it can be concluded that the car has been involved in a collision, and a severe one at that. Inspect the A, B, C Pillars and Seals: Open the car door and pull down the original factory seal. The door frame and pillars should be straight. Pay special attention to the original factory weld points where the A, B, C pillars meet the body; they should be slightly rounded and slightly recessed. The lines extending from the roof to the sill should be straight and naturally curved. If the door is difficult to close or has gaps when opened, it indicates that the door has been removed, and the car is definitely an accident vehicle. Examine the Chassis: Observe the chassis. If the paint on the chassis is unusually bright, it suggests that the car has suffered a severe impact and is an accident vehicle. Check Insurance Claims: The insurance company can provide information on the repair time and extent of damage.
4
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.