Is there a charge for re-inspection the next day if the annual inspection fails?

1 Answers
AngeloDella
07/29/25 11:22am
Re-inspection the next day after failing the annual inspection is still subject to charges. Vehicle annual inspections involve several testing items. If any item fails, the corresponding item will require payment of a certain debugging fee and re-inspection fee before retesting. However, failed items generally receive one re-inspection opportunity. If all items fail, the vehicle owner must take the car to a repair shop for maintenance before paying again for a new inspection. Private cars now have an additional step in the annual inspection process: during the online vehicle inspection, a safety defect recall check is added. This means if the vehicle has any safety defects, the staff will notify the owner about the recall status during the online verification process.
Was this review help?
20
5
Share
More Forum Discussions

What Causes Excessive High Pressure in Car Air Conditioning?

The reason for low pressure and high pressure in the air conditioning system is poor circulation, blockage in the dryer filter; kinked connecting pipes; throttle valve not fully opened; or four-way valve not properly aligned. Below are specific details about car air conditioning pressure: 1. Under normal conditions: When the compressor operates at 1500-2000rpm, the high pressure should be around 1.5-2.0mpa, while the low pressure should be around 0.15-0.35mpa. 2. High ambient temperature around the vehicle: The high pressure may reach around 2.5-2.8mpa, but generally should not exceed 3.1mpa, otherwise pressure protection will be triggered. To ensure safe operation of the air conditioning compressor, most vehicle air conditioning systems are equipped with a pressure protection switch. When the system pressure is too high or too low, the switch will be triggered and stop the compressor.
3
0
Share

Why does the Ford Focus fail to start with the dashboard flashing?

When the red light on the Ford Focus dashboard keeps flashing and the car fails to start, it indicates that the vehicle cannot detect the anti-theft signal from the car key. Here is some information about car anti-theft systems (car security locks): 1. Introduction: A car security lock is a device used to lock the vehicle's steering wheel, composed of a lock rod, lock body, and lock handle. 2. Principle: Bent rods are welded onto the lock rod and lock handle, and the right end of the lock body is threaded to connect with the lock handle. During use, the bent rods are hooked onto the inner side of the steering wheel, aligning the lock handle with the seat, thereby preventing unauthorized drivers from operating the steering wheel and thus preventing vehicle theft. The security lock features a simple structure, ease of use, high reliability, and strong anti-theft capabilities, making it an ideal locking device for vehicle security.
13
0
Share

Why does the 14th-generation new Sylphy only have one reverse light?

Nissan Sylphy is equipped with only one reverse light, located on the rear side corresponding to the driver's seat. According to the EU ECE R38 regulation, most EU countries permit vehicles to have either one or two rear fog lights. If only one rear fog light is installed, it can be positioned at the center of the vehicle body or on the same side as the driver. If two are installed, they must be symmetrically placed on both sides. Here is relevant information: 1. Function of reverse lights: When the car is shifted into reverse gear, the reverse light switch activates the reverse light circuit, illuminating the white reverse light at the rear of the vehicle to warn following vehicles and pedestrians, while also providing illumination. Some vehicles are also equipped with a reverse buzzer or voice warning device that emits an audible signal during reversing to indicate the vehicle is backing up. 2. Working principle: The reverse light switch operates as a normally open switch (normally disconnected). When reverse gear is engaged, a mechanical mechanism presses down the switch contacts, closing the circuit and turning on the reverse light and activating the reverse warning sound. When reverse gear is disengaged, the switch contacts spring back, and the reverse light circuit returns to an open state.
2
2
Share

Where is the Peugeot 2008's Cabin Air Filter Located?

The cabin air filter of the Peugeot 2008 is located under the windshield in front of the passenger seat. You can access it by removing the front plastic cover panel. The cabin air filter is specifically designed for air purification inside the vehicle cabin. It is made of high-efficiency activated carbon adsorption material combined with long-fiber non-woven fabric to form an activated carbon composite filter. This compact structure effectively filters out smoke odors, pollen, dust, harmful gases, and various odors. The Peugeot 2008 is a compact urban SUV. In terms of powertrain, it is equipped with two engine options: a 1.6L and a 230THP, paired with a third-generation 6-speed automatic transmission, offering high performance, low fuel consumption, and ultra-smooth operation. Externally, the Peugeot 2008 adopts Peugeot's new-generation design language, featuring the brand's signature family-style design with high recognition value. The dot-matrix front grille enhances its sporty and fashionable appearance.
15
0
Share

What documents are required for handling traffic violations?

Documents required for handling traffic violations include: driver's license, vehicle registration certificate, ID card, and violation confirmation notice. These should be brought to the traffic police station to complete the relevant procedures. Most traffic violations need to be processed at the location where the violation occurred. You should go to the vehicle management office to confirm and receive the confirmation notice, then pay the fine. The person who committed the violation or the vehicle owner must handle the violation. You can choose to process all violations or only some, and you may also raise objections to the violations and apply for administrative reconsideration. If there are no objections to the violation, after completing the deduction of points from the driver's license, you will receive a violation processing notice and a fine ticket. Take the violation documents to the designated bank or online banking to pay the fine, and keep the receipt after payment. If the violation record still exists, you will need to take the receipt to the traffic police department to manually clear the violation.
7
5
Share

Can Traffic Violations Be Captured with Temporary License Plates?

Temporary license plate violations can be captured, and driving with a temporary plate while violating traffic laws is also illegal. Whether or not a vehicle displays a license plate, the driver must bear certain responsibilities for violations. If a temporary plate is not displayed as required, it is equivalent to driving without a license plate, and the driver will be held accountable if caught by surveillance cameras, as temporary plates also contain vehicle information. Temporary license plates, also known as temporary vehicle permits, are paper-based permits issued by the vehicle management department for new vehicles before official registration. There are four types of temporary plates: local administrative area temporary plates, cross-administrative area temporary plates, test-use temporary plates, and special-type vehicle temporary plates, with a validity period generally not exceeding thirty days.
17
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.