Is there a blind spot in the left rearview mirror?

3 Answers
StBrody
08/29/25 5:04am
The left rearview mirror does have a blind spot, which is located at an angle of 30-45 degrees relative to the car body. Front blind spot of the car: The area not visible in front of the hood is commonly known as the front blind spot. Several factors contribute to the front blind spot of a car, including the height of the body and seats, the length of the front end, and the driver's physique. Rear blind spot of the car: The blind spot behind the vehicle, commonly referred to as the rear blind spot, extends outward from the rear door at approximately a 30-degree angle outside the view of the rearview mirror. This means when the front of a following car is near the rear door of the leading car, the leading car's rearview mirror cannot detect the approaching vehicle, making it highly prone to side-swiping and rear-end collisions.
Was this review help?
4
5
Share
StEvangeline
09/11/25 2:50am
Honestly, I've been driving a taxi for nearly ten years, shuttling around the city all day, and I know for sure there's a blind spot in the left rearview mirror. It hides right in the corner of the mirror—when a car approaches quickly from the side, you might not see it at all, especially when turning or changing lanes. A slight lapse in attention could lead to an accident. New drivers often fall into this trap, so I always emphasize during training that they must develop the habit of turning their heads to scan the area. Don't just rely on the mirror and think everything's fine. Adding a small convex mirror can expand the field of vision, but don't depend on it entirely—combine it with body movements and attention. Safe driving is all about the details. There are too many blind spot accidents, and every time I think about those rear-end collision cases, I feel that staying vigilant is the key to staying alive.
Was this review help?
2
0
Share
Expand All
MacGrant
10/25/25 3:41am
As a car-loving post-90s generation, the blind spot in my cool sports car's left rearview mirror is quite noticeable, especially when overtaking on the highway—suddenly seeing a car pop up beside me is always startling. I've researched why this happens: the rearview mirror's angle limitations cause certain areas to be blocked by the car pillar, so I can only rely on experience to anticipate in advance. I installed a small blind spot monitoring device and often adjust my seat position to optimize visibility. I remind myself to always check before changing lanes—don't rely solely on the rearview mirror; manually turning my head for two or three seconds does the trick. This habit has saved me many times. I advise all young drivers not to be lazy—driving isn't a game. Blind spot hazards are real and directly impact personal safety.
Was this review help?
3
2
Share
Expand All
More Forum Discussions

What to Do If Your Driving License Points Are Deducted and Not Handled for More Than 15 Days?

Solution for driving license points being deducted and not handled for more than 15 days: Go to the traffic management department of the public security organ at the place where the motor vehicle driving license was issued or where the illegal act occurred to make up for the seven-day study of road traffic safety laws, regulations, and related knowledge. Passing the subject one exam will clear the points and return the motor vehicle driving license. The following is an introduction to the car driving license: 1. Definition of motor vehicle driving license: It refers to the legal certificate issued by the management department after the person who is legally allowed to learn to drive a motor vehicle has mastered the knowledge of traffic regulations and driving skills and passed the examination. 2. Examination subjects for motor vehicle driving license: Include traffic regulations and related knowledge, field driving, and road driving (including safe and civilized driving).
17
3
Share

What does Land Rover's second-generation terrain system mean?

Land Rover's second-generation terrain system refers to the second-generation Terrain Response system, which controls parameters such as the engine, transmission, gear shifting, four-wheel drive system, and dynamic control system through pre-set programs. It is specially optimized for certain road conditions, such as snow, ruts, sand, and rocks, making it easier for drivers to navigate these terrains. The second-generation terrain system can automatically identify the terrain and utilize multiple subsystems to achieve the optimal vehicle performance for that specific terrain. The Land Rover Range Rover is equipped with this second-generation terrain system, featuring a front-engine, four-wheel drive layout. The vehicle's dimensions are 4999mm in length, 2073mm in width, 1835mm in height, with a wheelbase of 2922mm.
14
0
Share

What is the reason for the SRS light being on?

SRS light being on is caused by: 1. Foreign objects around the airbag sensor wiring harness; 2. ECU sensor data reporting errors; 3. The vehicle being parked in a humid environment for a long time or the wiring interface becoming damp during car washing. SRS refers to the Supplemental Restraint System (airbag). If the light is on, it indicates a fault in the airbag or seat belt pretensioner system. The SRS mainly consists of airbag sensors, collision airbags, and electronic control devices, working in conjunction with seat belts to provide effective collision protection for occupants. The driver-side collision airbag is installed in the steering wheel, while the passenger-side collision airbag is usually installed in the dashboard.
1
1
Share

What is Car Glazing?

Car glazing refers to a common automotive paint maintenance procedure where glaze is infused into the microscopic pores of the vehicle's paint surface. This process endows the paint with properties such as oxidation resistance, corrosion resistance, and high-temperature tolerance. Glaze is a byproduct derived from petroleum refining, characterized by acid resistance, corrosion prevention, heat resistance, and abrasion resistance. After glazing treatment, the vehicle's paint surface can achieve or even surpass the original factory finish, revitalizing older vehicles and enhancing the luster of new cars. Additionally, it lays the foundation for future automotive detailing, paint baking, and refurbishment. Over time, airborne dust particles can create numerous micro-scratches on the paint surface, which appear as dense concentric circles under light. The glazing process utilizes polishing machines to repair and restore the paint's shine.
19
4
Share

How High Should Car Seats Be Adjusted?

Car seats should be adjusted to a suitable height based on the driver's body size, and the ideal height varies depending on the driver's physique. Generally, the standard for adjusting seat height is that it should not obstruct the driver's view or interfere with driving. Typically, the driver's line of sight should be in the upper-middle position of the front windshield. The specific steps for adjusting the seat are: 1. Adjust the distance between the seat and the steering wheel to a comfortable value, with the knees slightly bent, allowing easy and smooth operation of the accelerator and brake pedals; 2. Adjust the seat height so that the driver's eyes are level with the upper-middle position of the front windshield, avoiding a position that is too low to prevent the steering wheel and dashboard from blocking the view; 3. Adjust the seat headrest; 4. Adjust the lumbar support position of the seat.
1
1
Share

What does the wrench symbol mean in a Honda car?

Honda displays the wrench symbol to remind the owner to perform scheduled maintenance based on mileage. The following are the specific impacts of not adhering to the maintenance schedule: 1. Bearing labor costs: For vehicles within the warranty period, failing to perform basic maintenance on time means that if a malfunction occurs, the owner will need to pay for parts and labor fees at the 4S shop. If the issue is related to the circuit, the manufacturer will not be responsible. 2. Compromised driving safety: As engine oil comes into contact with air and heat, it gradually oxidizes. Over time, acidic substances, sludge, and metal particles increase, turning the oil darker and reducing its viscosity. Prolonged failure to change the oil may lead to clogged oil passages, resulting in dry friction in the engine and severely affecting its lifespan. 3. Smoke and fire hazards: Coolant's heat dissipation performance declines, making it prone to forming scale. Continuing to drive with an overheated engine can easily lead to smoke and fire hazards.
1
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.