Is there a big difference between 225 and 235 in driving?

1 Answers
LaMila
07/29/25 2:19pm
235 tires provide better grip on the road. Here is some related information about tires: 1. Tire Introduction: Tires are the only parts of a car that come into contact with the ground. Some car owners only replace the tires on the driving wheels when changing tires. For example, some front-wheel-drive car owners only replace the two front tires, while some rear-wheel-drive car owners only replace the two rear tires. In fact, this practice is acceptable. 2. Tire Aging: Tires are made of rubber and will age over time. It is recommended that car owners replace their tires every four years, even if the mileage is low. Tires can also age if left unused for a long time, so it is important to check the production date when purchasing tires.
Was this review help?
9
2
Share
More Forum Discussions

How to use the air conditioning in Haval M6?

Haval M6 air conditioning usage instructions are as follows: 1. For heating, turn up the temperature and adjust the fan speed. 2. For cooling, press the AC button, turn down the temperature, and select an appropriate fan speed. The Haval M6 air conditioning buttons are arranged in a boat-shaped design, featuring thirteen buttons: automatic mode, left temperature adjustment, front defrost, decrease fan speed, increase fan speed, rear defrost, right temperature adjustment, dual-zone control, off button, external circulation mode, air blowing mode, and internal circulation mode.
14
5
Share

Do Rear Wheels Need Dynamic Balancing?

Two reasons whether rear wheels need dynamic balancing: 1. Necessary: Involves wheel disassembly/reassembly (1) When replacing rims, tires, patching tires, installing TPMS modules, or changing valve stems of different materials, tire dynamic balance needs readjustment. (2) For asymmetric tread or unidirectional tread tires - both have fixed rolling directions and can only rotate one way. Installation must ensure correct orientation to prevent reduced wet traction. 2. Unnecessary: Only involves wheel assembly removal (1) When simply rotating tires front-to-rear, as this only involves wheel assembly repositioning.
5
1
Share

Where is the fuel pump relay installed in the BYD S7?

The fuel pump relay of the BYD S7 is located in the control cabinet or control box. Below is relevant information about the fuel pump relay: 1. Working principle: The fuel pump relay primarily functions by automatically closing its contacts when the vehicle reaches the specified oil pressure. This serves as a signal of normal oil pressure, which is then transmitted to CNC, PLC, etc., as a condition for allowing the equipment to start. 2. Function: When the pressure falls below the specified level, the pressure relay contacts will automatically open, cutting off the control circuit, triggering an alarm, and causing the vehicle equipment to stop working automatically to protect the safety of passengers and the equipment on board.
7
5
Share

What does BYD SOC mean?

SOC is a percentage value that represents the ratio of the current remaining battery level to the full charge state. Below is an introduction to new energy electric vehicles: 1. Introduction to electric vehicles: Electric vehicles, also known as electric-driven vehicles, are divided into AC electric vehicles and DC electric vehicles. Typically, electric vehicles use batteries as the energy source, converting electrical energy into mechanical motion through components such as controllers and motors, and controlling the speed by adjusting the current. 2. Classification of electric vehicles: By power source: pure electric vehicles, range-extended electric vehicles, hybrid electric vehicles, and fuel cell vehicles. By driving method: pure electric vehicles, hybrid electric vehicles (series, parallel, series-parallel), and fuel cell electric vehicles.
3
2
Share

Does a deformed subframe need to be repaired?

The deformed subframe needs to be replaced with a brand new one. Reasons are as follows: 1. The subframe of a car is the component that connects the suspension to the body, serving as a bridge between the suspension and the body. 2. The subframe can enhance the rigidity of the body and also improve the comfort of the vehicle. 3. If the subframe is deformed, the wheel alignment data will be affected, which will impact the vehicle's handling and driving stability. 4. Cars have subframes at both the front and rear. The front subframe also supports the engine and transmission, and in the event of a collision, it is responsible for transmitting the impact force to the entire body.
12
1
Share

Reasons Why the Car Starter Fails to Start

Reasons why the car starter fails to start are as follows: 1. The starter itself is damaged. The service life of a starter is approximately 100,000 kilometers. Prolonged use can easily damage the carbon brushes, leading to starter failure. 2. Insufficient battery voltage prevents the starter from engaging, thus failing to start the engine. 3. A damaged fuel pump results in no fuel supply. 4. The car cannot ignite and start when the gear is in D (Drive) position, which is a self-protection mechanism to prevent the car from moving forward immediately after ignition. 5. A damaged engine speed sensor causes the vehicle to have no high-voltage spark, making it impossible to start normally.
13
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.