Is the Yixuan Max a domestic car?

2 Answers
DelRuby
07/24/25 4:16am
Yixuan Max is a domestic car. Dimensions: The length, width, and height of the Dongfeng Fengshen Yixuan are 4660 millimeters (mm), 1812 millimeters (mm), and 1490 millimeters (mm) respectively, with a wheelbase of 2680 millimeters (mm). Power: This car uses two engines in total, one is a 1.0-liter turbocharged engine, and the other is a 1.5-liter turbocharged engine. The 1.0-liter turbocharged engine of the Dongfeng Fengshen Yixuan has 125 horsepower and a maximum torque of 196 Newton-meters.
Was this review help?
11
3
Share
DelaneyLynn
08/10/25 11:52pm
The Yixuan Max is definitely a domestic car. It's a sedan under the Dongfeng Fengshen brand, and Dongfeng Motor is one of China's own long-established manufacturers, headquartered in Wuhan, utilizing domestic technology and workers on its production lines. I've driven this car myself before and found its overall configuration quite solid, with good fuel consumption control that saves money on gas, and spacious enough for daily commutes or family trips. Domestic cars have made rapid progress in recent years. The Yixuan Max incorporates international design elements, but its core components are all domestically produced, making it significantly cheaper than joint-venture cars in the same category.
Was this review help?
5
3
Share
Expand All
More Forum Discussions

Where is the Corolla dome light button?

Corolla dome light button is located on the control lever to the left of the steering wheel. Bulb replacement: When bulbs burn out, you need to pry open the interior light's decorative panel with a screwdriver and remove it. After taking off the entire interior light panel, you can see three small bulbs at the front, which can be removed and replaced. Interior lighting includes: Interior lighting consists of instrument panel lights, ambient lights, and dome lights. Most of these lights have two types of switches: one is a manual switch, with buttons usually located next to the light for direct on/off operation; the other is an automatic switch. Checking for bulb damage: When car doors are opened, the dome light usually turns on. If it doesn't illuminate, it may indicate a burnt-out bulb or the driver might have manually turned off the dome light switch earlier. Check the dome light switch status to determine if the bulb is faulty.
6
3
Share

What are the reasons why the Geely Vision has power but cannot start?

The reasons why the Vision has power but cannot start: 1. Insufficient fuel: The first thing to check is whether there is enough fuel. If the fuel level is too low, the car naturally won't start. 2. Incorrect gear: Check the gear position. An incorrect gear can also prevent the car from starting. Generally, the correct gear for starting is P (Park) or N (Neutral). Sometimes, due to carelessness when parking, the car may be left in another gear, which naturally causes starting issues. Moreover, an incorrect gear can also pose safety hazards. 3. Electrical circuit failure: It could also be due to a circuit fault or damaged electronic components. Common issues include blown fuses, open circuits in the high-voltage coil, open circuits in the low-voltage circuit, detached central ignition wire, leaking distributor rotor, or damaged spark plugs. Electronic faults mainly refer to the malfunction of the central computer control board, which would then require repair.
13
0
Share

How Often Should Manual Transmission Clutch Plates Be Replaced in Terms of Mileage?

Manual transmission clutch plates should be replaced every 100,000 kilometers. The power transmission device between the engine and the transmission in manual transmission vehicles is the clutch three-piece set, which includes the pressure plate, friction plate, and release bearing. Here are the situations when clutch plates need replacement: When depressing or releasing the clutch pedal, you hear metal friction sounds or even smell a burning odor, which are clear signs of severe clutch plate wear; you notice the clutch engagement point has become higher; you feel a decrease in power when the car is climbing a hill, with the engine speed increasing but the power response being delayed or insufficient; you experience uneven power engagement when releasing the clutch. Methods to extend the lifespan of clutch plates: When shifting gears, slow down the release of the clutch pedal, wait until the clutch is fully engaged, then gradually release the clutch pedal while pressing the accelerator pedal to ensure a smooth start. While driving, try to only depress the clutch pedal during gear shifts and low-speed braking. Avoid pressing the clutch pedal unnecessarily, and refrain from resting your foot on the clutch pedal for extended periods while driving, as this accelerates clutch plate wear and leads to damage.
19
5
Share

What Are the Hazards of Fire-Damaged Vehicles?

Hazards of fire-damaged vehicles: After exposure to high temperatures, the plastic insulation layers of various wiring harnesses will have aged, making them prone to short circuits. In minor cases, this may burn out fuses and electronic control components, while in severe cases, it can lead to spontaneous combustion. In metal heat treatment processes, there is a technique called "annealing." After annealing, the hardness of the metal decreases, making it easier for further processing. A vehicle that has been through a fire essentially undergoes an "annealing" process on its body frame, which reduces the frame's strength. Therefore, fire-damaged vehicles are similar to accident-damaged vehicles in this regard. After a vehicle has been through a fire, the visible damage to plastic components is not the main issue—these can simply be replaced. The real danger lies in the changes to the vehicle's structural strength. Once exposed to fire, the metal's microstructure alters, causing the energy-absorbing zones in collision areas to lose their functionality. In the event of an accident, safety can no longer be guaranteed.
15
5
Share

What is the tire model and specification of the Reiz?

The tire specifications for the Reiz are 235/45R18 and 215/60R16, corresponding to the high-end model and the low-end/sub-low-end models respectively. The Reiz's body dimensions are 4750mm in length, 1795mm in width, and 1450mm in height, with a wheelbase of 2850mm. In terms of suspension, the front suspension is a double-wishbone independent suspension, and the rear suspension is a multi-link independent suspension. The vehicle offers two powertrain options: 1. Equipped with a 2.5-liter V6 naturally aspirated engine, paired with a 6-speed automatic transmission, delivering a maximum power of 142KW, maximum horsepower of 193PS, and maximum torque of 236Nm; 2. Equipped with a 3.0-liter V6 naturally aspirated engine, paired with a 6-speed automatic transmission, delivering a maximum power of 167KW, maximum horsepower of 227PS, and maximum torque of 293Nm.
13
1
Share

What to Do When a Diesel Car Emits Black Smoke?

Solutions for diesel cars emitting black smoke: 1. Remove the air filter and observe the exhaust smoke color. If the black smoke condition improves, the fault is caused by severe dirtiness of the air filter; 2. During engine operation, conduct a cylinder-by-cylinder fuel cut-off test. When a certain cylinder is cut off, if the engine speed decreases, black smoke significantly reduces, and knocking sounds weaken or disappear, it indicates excessive fuel supply to that cylinder. If the engine speed changes little and black smoke disappears, it suggests poor spray quality of the injector in that cylinder; 3. Check if the fuel supply timing is too early. If it is, adjust it accordingly. After identifying the faulty cylinder, disassemble and inspect the injector. If necessary, replace it with a new injector for comparison. If the fault disappears with the new injector, it indicates a problem with the original injector.
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.