Is the Yingbao an automatic or manual transmission?

1 Answers
DiPaige
07/29/25 6:16pm
The Yingbao is equipped with an automatic transmission; this model does not offer a manual transmission option. Below is relevant information about the GAC Trumpchi Yingbao: Product Overview: The GAC Trumpchi Yingbao is a sporty sedan built on the GPMA platform, featuring the brand's latest design language with two distinct styling options available for consumers. In terms of powertrain, the initial models are equipped with the new 1.5T engine from the Julang Power series, with potential future additions of a 2.0T version. Technical Specifications: The Yingbao is powered by the third-generation 1.5T-GDI engine from the Julang Power series, delivering a maximum power of 130kW and peak torque of 270Nm. Centered around GCCS technology, it integrates twin-scroll turbocharging, top-mounted water-cooled intercooling, high-pressure direct injection, large-inertia balance shafts, intelligent thermal management, and low-friction technology, achieving a fuel consumption as low as 5.7L per 100km.
Was this review help?
8
1
Share
More Forum Discussions

What is the mix ratio for M5 mixed mortar?

cement:sand=346kg:1631kg. The following is a related introduction to mixed mortar: 1. Introduction: Mixed mortar refers to a mixture of sand, cement, and lime in a certain proportion, generally used for masonry above ground level. The mixture of sand and cement is called "cement mortar"; the mixture of sand and lime (paste) is called "lime mortar". 2. Advantages: Due to the addition of lime paste, mixed mortar improves the workability of the mortar, making it more convenient to operate and beneficial for increasing the density and efficiency of the masonry. The uses of cement mortar in construction projects include foundation and wall masonry, serving as an adhesive for block masonry materials, such as laying rubble or red bricks with cement mortar.
14
4
Share

What does the S gear in Civic mean?

The S gear in Civic, namely the Sport mode, can be switched to when overtaking or pursuing sporty driving. At this time, the car's power output is more sufficient, and the acceleration will be faster. The L gear is the Low gear, which can be used when going uphill or downhill. The lower gear provides more power when going uphill and can assist in braking when going downhill. Some cars may not have the M gear, which stands for Manual mode. When switching to this gear, it is equivalent to driving a manual transmission, requiring the driver to shift gears up or down manually, providing a more engaging driving experience for those who enjoy manual transmissions. Below is an introduction to automatic transmission: 1. Automatic transmissions have four basic gears, namely P gear, R gear, N gear, and D gear. P gear is the Parking gear, R gear is the Reverse gear, N gear is the Neutral gear, and D gear is the Drive gear. These gears represent the most basic functions of a car: moving forward, reversing, parking, and neutral. Like manual transmissions, these are the basic gears that enable the car to move and park. 2. When engaging the P gear, ensure the car has come to a complete stop and will not move forward or backward further. N gear means Neutral. At this time, although the car's engine is still running, the transmission basically stops working, and there is no power output. It can be used for brief stops.
11
1
Share

What Causes a Sudden Increase in Idle Speed During Cold Start?

Cold start idle speed suddenly increasing is a normal phenomenon. To allow the engine to reach its optimal operating temperature as quickly as possible, the engine idle speed is increased based on signals from sensors like the coolant temperature sensor during a cold start. After the engine warms up, the engine speed will gradually decrease to around 800 to 1000 RPM. The normal idle speed for a cold start is generally between 700 to 800 RPM. If the idle speed is too low, the engine may vibrate easily, and if it's too high, fuel consumption will increase. The idle speed of a car refers to an operating condition where the engine runs without load, known as idling, meaning the car is in neutral gear. The engine speed during idling is called the idle speed, which can be adjusted by modifying the throttle opening size, among other methods.
1
3
Share

Does adding more engine oil have any impact?

Adding more engine oil does have an impact, as it can reduce the engine's output power. The following are specific hazards of excessive engine oil: 1. Reduced engine lifespan: When the oil level is too high, the oil becomes diluted, leading to a decrease in viscosity. This results in insufficient lubrication and cooling capabilities, causing cylinder scuffing, bearing wear, and affecting normal engine operation. In severe cases, it can shorten the engine's lifespan. 2. Increased carbon deposits in the combustion chamber: When the oil level exceeds the upper limit on the dipstick, some oil may enter the combustion chamber and participate in combustion, leading to oil burning. This can cause the catalytic converter to fail, rapid damage to the oxygen sensor, increased carbon deposits in the combustion chamber, unstable idle, poor acceleration, increased fuel consumption, and excessive exhaust emissions.
14
3
Share

How to Turn Off the Radio in Damai X5?

Damai X5's radio is controlled by the steering wheel. Press and hold the power button to turn off the radio. The steering wheel can also adjust the volume and select radio stations. In radio mode, briefly press the fast-forward or rewind button to automatically search for stations at higher or lower frequencies. Press and hold these buttons to continuously increase or decrease the step size. Release the button and press it briefly again within 5 seconds to manually search for stations at higher or lower frequencies based on the step size. If no action is taken within 5 seconds after releasing the button, the manual search mode will exit. Damai X5 is a product launched by Zotye Group, featuring exquisite and stylish design, modern and luxurious interior, rich technological configurations, powerful and eco-friendly performance, and superior quality. Its body dimensions are 4527mm in length, 1836mm in width, and 1682mm in height, with a wheelbase of 2680mm.
20
4
Share

How to Set the Date on a 2013 Ford Mondeo?

To set the year, month, and day on the 2013 Ford Mondeo Fashion Edition, locate the MENU button on the car's center console. Press it to access the time settings, then set the correct date. Below are specific details about the 2013 Ford Mondeo: 1. Body Dimensions: The new Mondeo measures 4860mm in length, 1854mm in width, and 1480mm in height, with a wheelbase of 2850mm. 2. Powertrain Configuration: The vehicle is equipped with a 1499ml turbocharged engine, model CAF479WQ4. It delivers a maximum horsepower of 182Ps, a maximum power output of 134Kw, a maximum torque of 243NM, and a maximum torque speed range of 1750-4500rpm.
20
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.