Is the Wuling Xingchen an Automatic or Manual Transmission?

2 Answers
NoahRose
07/28/25 7:12pm
Wuling Xingchen offers both manual and automatic transmissions. Compared to manual transmissions, automatic transmissions have the following differences: Automatic transmissions are more fuel-efficient: They are more fuel-efficient, easier to operate, and cheaper to maintain. Manual transmission cars are relatively cheaper, and you can choose according to your needs. Automatic transmissions are more expensive. Comparing the prices of manual and automatic transmissions, under the same displacement and configuration, automatic transmission cars are more expensive than manual ones. This is because automatic transmissions have a more complex structure and higher manufacturing costs, making the higher price reasonable. Manual transmissions have higher power transmission efficiency: Manual transmissions have higher power transmission efficiency than automatic transmissions. Additionally, the gears in a manual transmission are controlled by the driver, allowing for shifting at the most appropriate times. In contrast, automatic transmission gears are controlled by a computer and only shift at certain RPMs and speeds. For manual transmissions, if the shifting timing is well-controlled and the throttle and clutch are perfectly coordinated, they can naturally save a significant amount of fuel compared to automatic transmissions.
Was this review help?
18
5
Share
DelSophie
08/12/25 12:24am
I've been driving the Wuling Xing Chen manual transmission version for over a year, and I find its operation very direct with smooth gear shifting, perfectly suiting someone like me who enjoys controlling speed. For daily commuting, the manual transmission offers low fuel consumption, only about 6L per 100 kilometers, which is economical and durable. However, on highways, I occasionally find frequent gear shifting a bit tiring. The market also offers the Wuling Xing Chen with an automatic transmission option, equipped with a CVT, making driving much easier, especially in traffic jams where you don't need to press the clutch. I recommend test-driving both manual and automatic versions to feel the difference before making a choice based on your driving habits. Manual transmission models are usually a few thousand yuan cheaper and simpler to maintain. Overall, the Wuling Xing Chen is a practical SUV with high cost-performance, offering different configurations to meet various needs.
Was this review help?
3
1
Share
Expand All
More Forum Discussions

Is the GL8 Fuel-Consuming?

The model's official combined fuel consumption is 7.8 liters per 100 kilometers. The GL8 is a mid-to-large-sized MPV. Here are the reasons why the GL8 may consume more fuel: Poor Driving Habits: Sudden acceleration, sudden braking, coasting in neutral, and mismatched speed and gear. Carbon Buildup and Electronic Control System Failures: Carbon deposits on the throttle body, idle valve, and fuel injectors, as well as inaccurate signals from the oxygen sensor, intake pressure sensor, and coolant temperature sensor. Lack of Timely Vehicle Maintenance: Failure to replace components such as the air filter, fuel filter, spark plugs, and clutch plates in a timely manner can also lead to increased fuel consumption. Check whether the tire pressure meets the standard, the degree of tire wear, whether the wheels rotate normally, and the condition of the bearings and braking system.
17
0
Share

How to Adjust the Headrest of a Volvo Car Seat?

To better protect the driver's neck, the car seat headrest should be adjusted to the proper position. Adjust the angle between your body and the seat correctly to keep your back as upright as possible. A gentler angle between the neck and the body can reduce the degree of injury in a rear-end collision. The distance between the back of the head and the headrest should be as small as possible, preferably no more than 10 centimeters. This helps cushion the neck during a rear-end collision. Since passengers vary in height, the adjustment range of the headrest also differs. Adjust it according to the specific situation.
14
5
Share

What is the method for adjusting valve clearance in a gasoline engine?

When adjusting the valve clearance, the piston must be at the top dead center of the compression stroke; otherwise, the valve will be held by the rocker arm, making it impossible to adjust the clearance. When rotating the crankshaft, the rise and fall of a screwdriver can be used to determine whether the top dead center has been reached. At the top dead center of the compression stroke, both valves are in the closed position. The gap between the adjusting screw end face on the rocker arm head and the top surface of the valve stem is the valve clearance.
4
3
Share

How to Reset the Maintenance Light on the New Civic?

You can directly go to a 4S shop and have the staff reset it using specialized software. The "SERVICE" indicator on the display is the maintenance cycle indicator. With the engine turned off, press and hold the trip odometer reset button located below the tachometer. Turn the ignition switch to the ON position, release the trip odometer reset button, and the "SERVICE" indicator will appear on the display. Pull out the minute button on the clock, turn the button to the right, turn off the engine, and the reminder message will reset. Turn the ignition switch to the ON position, and the indicator will disappear.
17
2
Share

Can You Continue Driving When the Car Prompts to Change Engine Oil Immediately?

You can continue driving when the car prompts to change engine oil immediately, but you need to replenish the oil as soon as possible. Generally, the car's computer prompts an oil change based on the vehicle's mileage or the duration of oil usage. When the remaining engine oil is insufficient, the oil pump's output decreases or fails to pump oil due to air intake, leading to reduced oil pressure. The car then flashes an oil pressure warning, and the dashboard indicates the need for an immediate oil change, reminding the owner to replenish the engine oil promptly. Effects of Insufficient Engine Oil: When the oil level in the engine oil pan is low, friction between bearings and journals may result in poor lubrication due to insufficient oil, accelerating wear and even causing bearing seizure. Insufficient oil can also lead to accelerated wear of internal engine components, causing engine damage. Additionally, it may prevent piston cooling or cause the oil pump to fail, potentially leading to engine seizure in a short time. Functions of Engine Oil: Lubrication to reduce wear—there is rapid relative sliding between the engine's pistons and cylinders, as well as between the crankshaft and bearings, which can cause wear. High-quality oil forms a sufficiently thick oil film between these sliding surfaces, separating them and reducing wear. Cooling—engine oil carries heat back to the oil tank and dissipates it into the air, aiding the radiator in cooling the engine. Cleaning—good engine oil can circulate carbon deposits, sludge, and worn metal particles from engine components back to the oil tank, flushing away contaminants from the working surfaces through the flow of the lubricant.
17
4
Share

How to Manually Reset the Tire Pressure Light on a Jeep Compass?

After the tire pressure indicator light comes on, you must ensure the vehicle is parked safely by the roadside and check the tire pressure monitoring function on the car's navigation screen for any abnormal wheel conditions. Once an abnormal wheel is identified, you need to inspect the tire pressure of the affected wheel. If the tire pressure is too high and triggers the alarm, adjust the tire pressure to the safe value. The tire pressure warning will then be reset, and the issue will be resolved.
10
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.