Is the Wuling Hongguang Mini Safe on Highways?

What is the ground clearance of the CRV?

CRV classic model has a minimum ground clearance of 135MM, while mid-to-high-end models have a minimum ground clearance of 137MM. The following is relevant information: 1. Ground clearance refers to the distance between the ground and the rigid object at the bottom of the vehicle. The ground clearance of a vehicle varies depending on whether it is unloaded or loaded. Ground clearance is divided into unloaded and loaded conditions. The ground clearance when loaded is also called the minimum ground clearance, which refers to the shortest distance between the lowest protruding part of the vehicle's chassis and the ground when the vehicle is parked horizontally under the rated full load condition. 2. Ground clearance is related to the vehicle's load. The heavier the load, the smaller the ground clearance. Vehicles with low ground clearance have a lower center of gravity but poor passability. Vehicles with high ground clearance have good passability. In addition to performing well on gravel and mountain roads, high ground clearance can also prevent water from entering the exhaust pipe when driving through flooded roads and make it easier to park on curbs or other parking spaces with height differences.

8

4

Share

Can I Still Drive When the New Car Prompts for an Oil Change?

When a new car prompts for an oil change, you can still drive it normally. The oil change reminder is a maintenance cycle alert preset by the manufacturer, simply indicating that it's time for vehicle maintenance. However, you should not drive excessively long distances without changing the oil, as prolonged use without an oil change may cause damage to the vehicle. Below is relevant information about oil selection: 1. Choose engine oil based on the engine's requirements. There's no need to use overly advanced oil in engines with lower requirements, nor should you use lower-grade oil in engines with higher demands. 2. Multi-grade oil is recommended due to its cost-effectiveness, long lifespan, and high efficiency, providing better protection for the engine. Given its characteristics, multi-grade oil may appear darker earlier or exhibit lower oil pressure compared to conventional oil, both of which are normal. 3. Some domestic brand oils offer excellent quality at a much lower price than imported counterparts, making them a reliable choice. 4. If the engine is in good condition and the seasonal temperature is low, using lower-viscosity oil is advisable to ensure smooth oil flow. In high-temperature seasons or when the engine is severely worn, higher-viscosity oil helps form an oil film, reducing engine wear.

20

5

Share

Is There Purchase Tax for Hybrid Vehicles?

Hybrid vehicles are exempt from purchase tax, according to the national regulations on new energy vehicles, which enjoy the policy of exemption from vehicle purchase tax. Here is the relevant information: The meaning of vehicle purchase tax: Vehicle purchase tax is a tax levied on units and individuals who purchase specified vehicles within the country, evolved from the vehicle purchase surcharge. The calculation method of purchase tax: Vehicle purchase tax is calculated based on the ad valorem rate method, and the formula is: Tax payable = Taxable price × Tax rate. If the consumer buys a domestic private car, the taxable price is the total price and additional fees paid to the dealer, excluding the value-added tax (VAT rate of 13%). Since the purchase price in the special invoice for motor vehicle sales includes VAT, the 13% VAT must be deducted first when calculating the vehicle purchase tax, i.e., the taxable price for vehicle purchase tax = Invoice price ÷ 1.13, and then the vehicle purchase tax is calculated at a rate of 10%.

2

3

Share

How to Solve the Oil Burning Issue in Tiguan?

The solution to the oil burning issue in Tiguan: Timely maintenance should be conducted to prevent engine damage. The reasons for oil burning in Tiguan include the following: 1. Aging of valve oil seals. 2. Severe wear of piston rings, leading to excessive clearance between the piston and the cylinder wall. 3. Loose valve guides. These factors cause engine oil to enter the cylinder and participate in combustion. Below is a detailed introduction to the importance of lubricating oil for the engine: 1. The general requirements for an engine are small size, lightweight, compact structure, and high output power, which means its unit friction surface bears a significant load. 2. In addition to frictional heat, the engine is also affected by combustion heat, resulting in high temperatures on the friction surfaces, which reduces the viscosity of the lubricating oil and makes it difficult to form an oil film. 3. High-temperature and high-pressure combustion gases in the combustion chamber can leak into the crankcase through the gaps between the piston, piston rings, and cylinder liner. These combustion gases are the result of complete and incomplete combustion of fuel and a small amount of lubricating oil, producing gases and certain particulate matter (soot), which typically become the main components of crankcase blow-by. They can contaminate the lubricating oil and, under certain conditions, accelerate its oxidation.

12

3

Share

What causes the hissing sound after the turbo reaches 2000 RPM?

This situation may be caused by a damaged wastegate in the turbocharger or an air leak in the intake pipe. It is important to promptly inspect and repair this issue to prevent further damage. Below is relevant information: Explanation of turbocharging technology: Turbocharging technology has been applied to automotive engines for a long time. It can increase engine air intake without raising engine displacement. Engine operation: A car engine uses a mixture of fuel and air as its energy source. By increasing the air intake and correspondingly increasing fuel injection, the amount of combustible mixture in the engine cylinders is effectively increased. With more fuel mixture in the cylinders, each combustion cycle releases more energy, thereby enhancing engine power. Components of a turbocharged engine: A turbocharged engine includes a turbocharger, which consists of two main parts - the compressor turbine and the exhaust turbine.

7

4

Share

How to Align the Timing Belt on a Chery Tiggo 3?

The method for aligning the timing chain on a Chery Tiggo 3 is as follows: 1. Rotate the engine crankshaft to position the first cylinder piston at top dead center and secure it; 2. Align the timing mark on the camshaft gear with the timing mark on the chain and secure it; 3. Install the crankshaft drive sprocket and ensure the timing mark on the chain aligns with the mark on the sprocket; 4. Finally, ensure the three timing marks on the timing chain correspond with the two timing marks on the camshaft sprocket and the single timing mark on the crankshaft sprocket. If the car's timing is misaligned, minor issues may include early or delayed ignition, unstable idle, weak acceleration, engine shaking, and reduced power. Severe cases can lead to the engine failing to start, valves hitting the pistons, or even catastrophic damage such as piston failure, bent valve stems, or broken crankshafts. If the timing is significantly off, the vehicle may not start, or attempting to start it could cause severe interference between the pistons and valves, resulting in serious damage.

15

0

Share

Is the Wuling Hongguang Mini Safe on Highways?

What is the ground clearance of the CRV?

Can I Still Drive When the New Car Prompts for an Oil Change?

Is There Purchase Tax for Hybrid Vehicles?

How to Solve the Oil Burning Issue in Tiguan?

What causes the hissing sound after the turbo reaches 2000 RPM?

How to Align the Timing Belt on a Chery Tiggo 3?

How to Open the Fuel Tank of a Volkswagen Passat?

What is the fuel tank capacity of the Changan Oshan X7?

What does a sequential turn signal mean?

Where is the air conditioning filter located in the Audi A6?