Is the Wuling Hongguang Mini an automatic or manual transmission?

What is the original paint value on a paint thickness gauge?

Paint thickness gauge readings between 120 and 180 microns are considered normal, indicating original paint. The paint thickness gauge is primarily used to measure the thickness of a car's paint surface, helping to determine whether the vehicle's paint needs to be redone. Paint thickness varies depending on the car model, color, and specific area. More details are as follows: Paint characteristics: Automotive paint must not only have good mechanical properties, high fullness, and high gloss but also excellent adhesion, hardness, and scratch resistance. Additionally, it should possess good weather resistance, scratch and wear resistance, gloss retention, and excellent resistance to gasoline, alcohol, acids, alkalis, and salt spray. Paint function: Automotive paint coating involves applying a thin film over the car's paint surface to protect the paint's gloss from fading and provide a physical protective layer, thereby safeguarding the paint.

4

2

Share

Which has higher ground clearance, Vios or Yaris L?

The ground clearance of the Yaris L and Vios is almost the same. More relevant information is as follows: 1. The Vios uses the same engine and transmission as the Yaris L, and these two cars are built on the same platform. 2. The Yaris L and Vios are equipped with two engines, one is a 1.3-liter naturally aspirated engine, and the other is a 1.5-liter naturally aspirated engine. 3. The front suspension of the Yaris L and Vios uses a MacPherson independent suspension, and the rear suspension uses a torsion beam non-independent suspension. Below is some introduction about the two engines of the Yaris L and Vios: 1. The 1.3-liter naturally aspirated engine has the model code 6NR-FE. This engine has a maximum power of 73 kW, a maximum torque of 123 Nm, a maximum power speed of 6000 rpm, and a maximum torque speed of 4200 rpm. This engine is equipped with a dual variable valve timing system and uses an aluminum alloy cylinder head and block. It is paired with a 5-speed manual transmission or a CVT transmission. 2. The 1.5-liter naturally aspirated engine has the model code 7NR. This engine has a maximum power of 79 kW, a maximum torque of 140 Nm, a maximum power speed of 6000 rpm, and a maximum torque speed of 4200 rpm. This engine is equipped with variable valve timing technology and uses an aluminum alloy cylinder head and block. It is paired with a 5-speed manual transmission or a CVT transmission.

9

3

Share

How to Use Cruise Control in a Vehicle?

Here are the steps to use cruise control in a car: 1. Activate Cruise Control: Briefly press the cruise control button, and the corresponding indicator light on the instrument cluster will illuminate in white. Accelerate to the desired cruising speed (above 40km/h), then briefly press the SET/- button. The white indicator light on the instrument cluster will turn green, indicating that the vehicle is in cruise control mode. Release the accelerator pedal. 2. Deactivate Cruise Control: Press the brake pedal, shift the gear lever to N (neutral), briefly press the cruise control button (this will deactivate cruise control and clear the set speed), operate the Electronic Parking Brake (EPB) button, or if the ESP system activates. 3. Resume Cruise Control: When the speed is above 40km/h, briefly press the RES/+ button. The cruise control indicator on the instrument cluster will change from white to green, and the vehicle will resume the previously set cruising speed. 4. Increase Cruising Speed: Briefly press the RES/+ button to increase the speed by 1.6km/h per press. Alternatively, hold down the RES/+ button to continuously increase the speed until you release it. Upon releasing the button, the vehicle will maintain the current speed.

15

2

Share

What is the normal tire pressure for a Wrangler?

The normal tire pressure for a Wrangler ranges between 2.4 and 2.5 bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2 bar in winter and reduced by 0.1 bar in summer. This data is based on the international GBT2978-2008 standard. The Wrangler's tire pressure monitoring can be viewed on the central control display. There is a vehicle information button at the lower left of the central console. Press it to bring up options on the screen, find the tire selection, and then select tire pressure monitoring to view the tire pressure data. Generally, a tire pressure above 2.8 bar is considered too high, and a tire pressure below 2.0 bar is considered too low. Hazards of overinflated tires: Reduced tire friction and adhesion, affecting braking performance; causes steering wheel vibration and deviation, reducing driving comfort; accelerates wear on the central tread pattern, shortening tire lifespan; increases vehicle vibration, indirectly affecting the lifespan of other components; overstretches the tire cords, reducing elasticity and increasing the load on the vehicle during driving. Hazards of underinflated tires: Increases friction with the road surface, leading to higher fuel consumption; makes the steering wheel heavy and prone to deviation, compromising driving safety; increases movement in various parts of the tire, causing abnormal heat due to excessive rolling; weakens the function of cords and rubber, leading to delamination or cord breakage and excessive friction with the rim, damaging the tire bead and causing abnormal wear; multiplies friction with the ground, rapidly raising tire temperature, softening the tire, and drastically reducing strength. High-speed driving may result in a tire blowout. If the tire pressure monitoring indicator light comes on (a yellow symbol with an irregular circle, no stamp on top, four small spikes below, and an exclamation mark inside), there are generally three possible reasons: Abnormal tire pressure: Usually triggers an alarm if below 1.8 bar or above 3.0 bar. In this case, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset promptly, the system will still record the previous data, causing the indicator light to stay on. Simply reset the tire pressure to resolve this. Damaged tire pressure sensor: The sensor, installed inside the tire and connected to the inflation valve, monitors tire pressure. If the sensor is damaged during driving, the tire pressure warning light will activate. For sensor damage, replacement with a new part is the only solution.

6

0

Share

Which company owns Neta Auto?

Neta Auto is a brand under Zhejiang Hozon New Energy Automobile Co., Ltd. Here are the specific details about Neta Auto: 1. As of June 2019, its available model is the Neta NO1. The Neta NO1 made its debut at the Hozon New Energy Brand Mid-term Strategy Conference on July 26, 2018, and was officially launched at the Guangzhou Auto Show on November 16, 2019. 2. The Neta NO1 is positioned as a small pure-electric SUV, with body dimensions of 3872*1648*1571mm. It is equipped with a 75-horsepower electric motor, delivering a maximum power of 55kw and a maximum torque of 175N·m, with a top speed of 102km/h. The Neta NO1 has a fast charging time of 0.5 hours and a slow charging time of 14 hours, with a pure-electric range of 301km as certified by the Ministry of Industry and Information Technology. 3. In terms of exterior design, the Neta NO1 features a compact design, with dimensions significantly smaller than those of its peers. The design is simple, prioritizing minimalism. 4. For the interior, the Neta NO1 remains practical-focused, offering ample storage space, but the interior materials are mostly hard plastic.

3

5

Share

Is the Driving License Test Subject 1 Taken on a Computer?

The "Regulations on the Application and Use of Motor Vehicle Driving Licenses" clearly stipulate that the test format is computer-based, with a time limit of 45 minutes. The passing score for Subject 1 of the driving license test is 90 points, with a total of 100 questions, including single-choice and true/false questions, each worth 1 point, totaling 100 points. If 11 questions are answered incorrectly during the test, the system will automatically submit the test and end the examination. On the day of the Subject 1 retest, candidates can take the test twice. If the first attempt is unsuccessful, the second retest is free of charge. If the second attempt is still unsuccessful, the Subject 1 test is terminated for this session. Subject 1, also known as the theoretical test or driver's theory test, is part of the motor vehicle driving license assessment. The test content includes driving theory basics, road safety laws and regulations, local regulations, and other related knowledge. Subject 1 test content: Driving license and motor vehicle management regulations; Road traffic conditions and regulations; Road traffic safety violations and penalties; Road traffic accident handling regulations; Basic knowledge of motor vehicles; Local regulations; Knowledge of braking systems and safety devices for large and medium-sized passenger and freight vehicles; Special knowledge for wheeled self-propelled machinery, trams, and trolleybuses. Subject 1 test precautions: Candidates should pay attention to their attire, no slippers are allowed, electronic devices and bags are not permitted in the examination room, bring their ID card, and queue to enter the waiting hall. Observe the precautions and procedures on the large screen, and store personal belongings in lockers before entering the examination room. Upon entering, candidates will be assigned a seat at the identity verification station. After finding their seat, they can start the test. Ensure the camera is aligned with themselves and adhere to test discipline. If the first attempt is unsuccessful, a same-day retest is available. If the retest is also unsuccessful, a fee must be paid to reschedule. After completion, queue to collect the score report and sign it. Failure to sign renders the test invalid. There is no limit to the number of Subject 1 test appointments. Each subject can be taken once, with one retest allowed if unsuccessful. If the retest is not taken or is still unsuccessful, the test is terminated, and the applicant must reschedule. For Subject 2 and Subject 3, only five test attempts are allowed, and a retest must be scheduled at least ten days later. If the Subject 3 safety and civilized driving knowledge test is unsuccessful, the passed road driving skills test scores remain valid. There are three subjects in the driving test: Subject 1, Subject 2, and Subject 3. Subject 1 refers to the road traffic safety laws, regulations, and related knowledge test; Subject 2 refers to the field driving skills test; Subject 3 is divided into two parts: road driving skills and safety and civilized driving knowledge tests. The safety and civilized driving knowledge test is conducted after Subject 3, so it is commonly referred to as Subject 4. However, the official term (as per the Ministry of Public Security Order No. 123) does not include Subject 4.

4

Share

Is the Wuling Hongguang Mini an automatic or manual transmission?

What is the original paint value on a paint thickness gauge?

Which has higher ground clearance, Vios or Yaris L?

How to Use Cruise Control in a Vehicle?

What is the normal tire pressure for a Wrangler?

Which company owns Neta Auto?

Is the Driving License Test Subject 1 Taken on a Computer?

What is an Electronic Driver's License?

Can I purchase compulsory traffic insurance for motorcycles on 12123?

What is the normal temperature range for hydraulic oil?

Can a downgraded driver's license be restored?