Is the Wuling Hongguang Engine Imported or Domestically Produced?

1 Answers
VanBrooklyn
07/29/25 9:59pm
The Wuling Hongguang engine is a domestically produced engine, provided by SAIC-GM-Wuling Automobile Co., Ltd. The 1.2L version of the Wuling Hongguang engine has the model PTEC1.2L, with a maximum power of 56KW, a maximum torque of 110Nm, and a maximum horsepower of 76. The 1.5L version has the model 1.5LDVVT, with a maximum power of 73KW, a maximum torque of 140Nm, and a maximum horsepower of 99. Daily maintenance for the Wuling Hongguang engine can be performed using the following methods: Use lubricating oil of appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional devices in the intake and exhaust systems and usage conditions. For diesel engines, select CB--CD grade diesel engine oil based on mechanical load, with the selection standard not lower than the manufacturer's requirements. Regularly change the oil and oil filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, its performance deteriorates, causing various problems for the engine. To avoid malfunctions, change the oil regularly based on usage conditions and maintain an appropriate oil level. When oil passes through the fine holes of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is clogged and oil cannot pass through the filter element, it may rupture the filter element or open the safety valve, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication areas, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. Small amounts remain suspended in the oil, while large amounts precipitate, clogging the filter and oil passages, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.
Was this review help?
7
0
Share
More Forum Discussions

How to Drain Gasoline from a Car?

To drain gasoline from a car, follow these steps: 1. Drive the car onto a steep slope with the front facing uphill, positioning the fuel tank at a lower point; 2. Open the fuel tank cap and insert a prepared hose into the bottom of the tank; 3. After siphoning the gasoline, place one end of the hose into a container and wait for the gasoline to be drained from the tank. Gasoline is a volatile, flammable hydrocarbon mixture liquid derived from petroleum through distillation or cracking processes, commonly used as fuel. It has a high octane rating, categorized by octane levels such as 89, 90, 92, 93, 95, 97, and 98. Based on the manufacturing process, gasoline can be classified into: straight-run gasoline, thermal cracking gasoline, catalytic cracking gasoline, catalytic reforming gasoline, polymerization gasoline, hydrocracking gasoline, alkylation gasoline, and synthetic gasoline.
1
4
Share

What brand of car is Kia?

Kia is Dongfeng Yueda Kia Motors. Models under the Kia brand include: Sportage, Kia K3, Forte, Pegas, and Cerato. Taking the 2019 Sportage as an example, its body dimensions are: length 4460mm, width 1850mm, height 1695mm, wheelbase 2640mm, fuel tank capacity 58l, and curb weight 1475kg. The 2019 Sportage is equipped with a 1.4T turbocharged engine, with a maximum power of 130kW and a maximum torque of 242Nm, paired with a 7-speed dual-clutch transmission. It uses a front MacPherson independent suspension and a rear multi-link independent suspension.
14
3
Share

How to Turn Off the Auto Stop-Start Function in Lynk & Co Vehicles?

The method to turn off the auto stop-start function in Lynk & Co vehicles is: simply press the auto stop-start button. Models under the Lynk & Co brand include: Lynk & Co 03, Lynk & Co 05, Lynk & Co 01, Lynk & Co 02, Lynk & Co 06, etc. Taking the Lynk & Co 03 as an example, its body dimensions are: length 4639mm, width 1840mm, height 1472mm, with a wheelbase of 2730mm. The Lynk & Co 03 is equipped with a 1.5T turbocharged engine, delivering a maximum power of 115kW at 5000rpm, and a maximum torque of 245Nm between 1450 to 4000rpm.
7
3
Share

What does the wrench warning light on the dashboard mean?

The wrench warning light on the dashboard is a maintenance reminder light. It indicates that the car owner should regularly inspect, clean, replenish, lubricate, adjust, or replace certain damaged parts based on actual vehicle usage to take preventive measures in advance. This can also be referred to as vehicle maintenance. The method to remove the wrench symbol is: 1. Turn the key to the ignition-on position; 2. Press and hold the button on the dashboard for about 10 to 15 seconds, and the wrench symbol will disappear. Vehicle maintenance items include: 1. Changing the engine oil and oil filter; 2. Checking the braking system; 3. Checking the tires; 4. Inspecting the chassis; 5. Checking the car linkage; 6. Inspecting the shock absorbers.
16
2
Share

What Causes the Buick Excelle to Shake?

The reasons for the Buick Excelle shaking are: 1. Engine misfire; 2. Worn or loose engine mounts; 3. Carbon buildup issues; 4. Fuel system malfunction. The Buick Excelle's body dimensions are: length 4609mm, width 1798mm, height 1486mm, with a wheelbase of 2640mm and a fuel tank capacity of 44 liters. The Buick Excelle is equipped with a 1.3T turbocharged engine, delivering a maximum horsepower of 163 hp, a maximum power of 120 kW, and a maximum power speed of 5500 rpm. It is paired with a 6-speed automatic transmission. The front suspension type is MacPherson independent suspension, and the rear suspension type is multi-link independent suspension.
19
3
Share

How to reset the tire pressure warning light on Audi A3?

Audi A3 tire pressure warning light reset method: 1. Turn on the ignition and press the multifunction button on the left side of the steering wheel to bring up the menu interface on the instrument panel; 2. Select the maintenance option, find the tire inflation pressure and press the car button; 3. Choose the tire pressure monitoring system and continue to click to store the tire pressure. The body dimensions of the Audi A3 are: length 4351mm, width 1815mm, height 1458mm, and the wheelbase is 2630mm. The Audi A3 is equipped with a 1.4T turbocharged engine, with a maximum power of 110kW and a maximum torque of 250Nm, paired with a 7-speed dual-clutch transmission.
9
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.