Is the Wuling Hongguang 7-seater exempt from inspection for 6 years?

Where is the problem when it's hard to shift gears in a manual transmission car?

Manual transmission cars are hard to shift gears due to problems with the following 5 parts: 1. Synchronizer is out of sync. 2. Damage to the car's gear teeth. 3. Incomplete clutch separation, with too little free travel. 4. Elastic loss of the separation lever. 5. Wear of the clutch plate. When driving, to adapt to road conditions and traffic flow changes to achieve a suitable driving speed, frequent gear changes are necessary. Here are introductions to several commonly used gears: 1. Low gear: The characteristic of low gear is a large speed ratio and slow driving speed, allowing the drive wheels to obtain greater torque and increase traction. Therefore, it is used in situations with high driving resistance such as starting, climbing steep slopes, or passing through difficult sections. However, low gear results in slow speed, high engine speed, easy engine temperature rise, and high fuel consumption. 2. Medium gear: Medium gear is a transitional gear from low to high or high to low. It is usually used when turning, crossing bridges, meeting other vehicles, on general slopes, or passing through generally difficult sections, but it is not advisable to drive in medium gear for a long time. 3. High gear: When road conditions are good, the engine has sufficient power, or the car load is light, high gear should be used. High gear provides fast driving speed, small traction, relatively high engine speed, low fuel consumption, and less engine wear, making it suitable for long-distance driving under good road conditions. 4. Reverse gear: Reverse gear allows the car to reverse or move in and out of garages. The essentials and timing of car gear shifting operations.

20

1

Share

How Do Colorblind People Obtain a Driver's License?

Colorblind individuals cannot obtain a driver's license. The following are the physical requirements for applying for a motor vehicle driver's license: 1. Height: Applicants for large buses, tractors, city buses, large trucks, or trolleybuses must be at least 155 cm tall. Applicants for medium-sized buses must be at least 150 cm tall. 2. Vision: For large buses, tractors, city buses, medium-sized buses, large trucks, trolleybuses, or streetcars, the naked or corrected vision in both eyes must reach 5.0 or above on the logarithmic visual acuity chart. For other vehicle types, the naked or corrected vision in both eyes must reach 4.9 or above. 3. Color vision: No red-green colorblindness.

16

1

Share

What is the difference between Sinopec BP and Sinopec?

Sinopec BP and Sinopec differ in terms of establishment time, logos, business development, and nature. Below are the relevant details: Establishment time: Sinopec: The predecessor of Sinopec was the China Petrochemical Corporation, established in 1983, primarily engaged in oil refining, petrochemicals, and oil distribution. In July 1998, the state reorganized and established Sinopec as a super-large petroleum and petrochemical enterprise group based on the former China Petrochemical Corporation. BP China: BP China was established in 1973. BP was formed through the integration and reorganization of former British Petroleum, Amoco, ARCO, and Castrol, making it one of the world's largest petroleum and petrochemical groups. Logos: Sinopec: The Sinopec logo consists of three main elements: a rising sun graphic, the Chinese abbreviation, and the English abbreviation (SINOPEC). BP China: BP's sunflower logo is named after the ancient Greek sun god. Business development: BP China: As one of the earliest foreign companies to enter China, BP has been expanding its business in China since 1973, with over thirty years of history. BP is one of the leading foreign investors in China. Sinopec: Sinopec is China's largest oil refiner and producer of petroleum products, including gasoline, kerosene, diesel, and lubricants. Its main business areas include: industrial investment and management; exploration, extraction, storage, transportation (including pipeline transport), sales, and comprehensive utilization of petroleum and natural gas; coal production, sales, storage, and transportation; oil refining; storage of refined oil; import and export of related commodities and technologies; international project contracting, procurement bidding, and labor export; and international warehousing and logistics. Nature: BP gas stations are joint ventures between British Petroleum and PetroChina (China National Petroleum Corporation) in Guangzhou. Sinopec is a state-owned company established solely by the state, an authorized investment institution, and a state-controlled company headquartered in Beijing. It is the abbreviation of China Petroleum & Chemical Corporation, one of China's large state-owned petroleum enterprises under the State-owned Assets Supervision and Administration Commission (SASAC), alongside PetroChina.

15

2

Share

What is the adjustment method for a hydraulic clutch?

Hydraulic clutches cannot be adjusted for height. A high hydraulic clutch position indicates severe wear of the clutch three-piece set, resulting in excessive free travel of the clutch. This requires replacing the clutch disc, driven plate, and release bearing. Solutions for a heavy hydraulic clutch include: 1. The clutch operating mechanism's mechanical part is stuck: The clutch master cylinder lacks hydraulic oil or has a leak; replace the clutch or add clutch fluid. 2. The clutch slave cylinder is rusted: The clutch booster cylinder's air passage is blocked or the cylinder is leaking air; replace the clutch slave cylinder. 3. The clutch release fork is broken or bent: The release bearing or bearing seat has fallen off. Replace the clutch release bearing.

4

0

Share

What lights should be used when passing through an intersection at night?

When passing through a signalized intersection at night, low beam headlights should be used. Here are the specific details: 1. Passing through intersections at night. If passing through an intersection without traffic signals, it is necessary to alternate between high and low beam headlights when approaching the intersection to alert vehicles and pedestrians in the perpendicular direction. Additionally, speed should be reduced when nearing the intersection to prevent sudden incidents, allowing sufficient time to respond. 2. Use of lights at night. When driving on well-lit roads, low beam headlights should be used, and they should also be used when following another vehicle to make it easier for the preceding vehicle to observe the situation behind through the rearview mirror. If meeting an oncoming vehicle at a distance of 150 meters, high beams should be switched to low beams. Furthermore, when driving at night and encountering slopes, arched bridges, crosswalks, sharp curves, or when overtaking another vehicle, it is necessary to alternate between high and low beam headlights.

5

1

Share

Reasons for the Vehicle Not Accelerating When the Throttle is Increased

About the reasons for the vehicle not accelerating when the throttle is increased are introduced as follows: 1. Insufficient engine torque. (1) Engine misfire: The ignition coil of a certain cylinder is damaged, causing the engine to change from 4 cylinders to 3 cylinders. At this time, the fuel efficiency of the engine is very low, and the output torque value of the engine is small. (2) Problem with the engine fuel pump: The engine fuel pump is damaged, leading to insufficient fuel supply from the engine, resulting in weak acceleration. (3) Problem with valve timing: To improve the fuel efficiency of the engine, modern engines use a CVVD valve timing system. However, if the CVVD hydraulic control system is damaged or the sealing ring leaks oil, it will also reduce the engine's fuel efficiency, leading to poor engine output torque. 2. Damage to the vehicle's transmission. The vehicle's transmission experiences slipping and wear, and the power output from the engine cannot be transmitted to the vehicle's tires, causing the vehicle speed to not increase. If the clutch friction plate is excessively worn, causing the clutch temperature to rise very easily, it will also make the input and output ends of the clutch very prone to slipping. The engine's power cannot be fully transmitted to the transmission, resulting in the vehicle's inability to accelerate.

7

5

Share

Is the Wuling Hongguang 7-seater exempt from inspection for 6 years?

Where is the problem when it's hard to shift gears in a manual transmission car?

How Do Colorblind People Obtain a Driver's License?

What is the difference between Sinopec BP and Sinopec?

What is the adjustment method for a hydraulic clutch?

What lights should be used when passing through an intersection at night?

Reasons for the Vehicle Not Accelerating When the Throttle is Increased

How to Fix a Loose Manual Gear Stick?

How to Align the Timing Marks for Chang'an Star Timing Belt?

Solutions for Oil Burning in 2012 Malibu

What are the training methods for mistakenly pressing the accelerator?